System and accessories

Flexible Templates for Curved & Arched Routing Flexible Templates for Curved & Arched Routing 2
System and accessories

Flexible Templates for Curved & Arched Routing

CMT Orange Tools
CMTTMP-1000
€107.64
The CMT flexible template is easy to screw on any kind of wooden panels, MDF or chipboard for creating forms, arcs and curved elements easily and rapidly. In order to fix your template you can use countersunk screws, which are widely available on the market. The CMT template is made of a highly-resistant flexible plastic, which can be tied in knots...
View options
Digital Height Gauge Digital Height Gauge 2
System and accessories

Digital Height Gauge

CMT Orange Tools
CMTDHG-001
€46.18
Digital height gauge (mm/inch/fraction).  Precise measurements for: Router bits, Saw blades, Band saw blades, Cutter heads, Drill bits, Holes depth. Measuring ruler with locking screw. Self standing with magnets. Depht pin to measure narrow holes or channels. Instruction manual.   Technical Details: - Measuring range:...
View options
Double-edge trimmer Double-edge trimmer 2
System and accessories

Double-edge trimmer

CMT Orange Tools
CMTDET-001
€22.94
Attach this trimmer to your workpiece, press both ends against the board for a cutting range between 13mm (1/2”) and 25mm (1”), move the trimmer in the correct direction indicated by the arrow. This will cut on both sides easily. The first cutter will cut straight, the second one can be adjusted for a tapering cut. Both cutters are...
View options
Professional Straight Edge Clamps Professional Straight Edge Clamps 2
System and accessories

Professional Straight Edge Clamps

CMT Orange Tools
CMTPGC
€45.16
Used as a fence for your bandsaw, drill press or even as an auxiliary fence on your router table or table saw, CMT’s professional straight edge clamps represent a two-in-one tool, allowing you to either use them as an edge guide, or to easily clamp your boards or any object for woodworking. Available in different sizes.   Here are the main...
View options
PGC - Back-to-Back Connectors for Straight Edge Clamps (optional) PGC - Back-to-Back Connectors for Straight Edge Clamps (optional) 2
System and accessories

PGC - Back-to-Back Connectors for Straight Edge Clamps (optional)

CMT Orange Tools
CMTPGC.ric
€28.45
Lay two more straight edge clamps on the back of the other pair of straight edge clamps and secure them by using your back-to-back connectors.  Fasten the bottom jaw pads to the table top and clamp wood with the top jaw pads. Thanks to the low profile jaws your work surface is never obstructed.  The back-to-back straight edge clamps can...
View options
Edge banding end trimmer Edge banding end trimmer 2
System and accessories

Edge banding end trimmer

CMT Orange Tools
CMTDET-002
€52.55
An indispensable tool for easy and safe end trimming after edge banding.   Position the tool on the banding, press down on the handle to operate the blade in a shearing action. The cutting knives are interchangeable, so when the cutting knife becomes dull, you can simply replace it with the anvil knife for a double lifetime.   For cutting...
View options
Laminate/veneered cutter Laminate/veneered cutter 2
System and accessories

Laminate/veneered cutter

CMT Orange Tools
CMTDET-003
€232.37
A very useful hand tool for clean, splinter-free cuts on laminates and veneered with no waste. Place your material into the fence provided and have the cutter run along the edge of the panel. The two opposing steel-made circular cutting blades mounted on roller bearings will trace the cutting line. Use the micrometer knob on the top of the tool to set...
View options
7-bushing template guide kit 7-bushing template guide kit 2
System and accessories

7-bushing template guide kit

CMT Orange Tools
CMTCMT-TGA
€77.34
A practical 7-bushing kit that will extend the possibilities of your router. For template-controlled operations such as dovetailing, stair routing, hinge butt routing, lock face routing and more general template tasks. These template guides can be used with any router featuring a 30mm (1-3-/16”) bore baseplate. Fits the most popular routers. Some routers...
View options
Digital moisture meter Digital moisture meter 2
System and accessories

Digital moisture meter

CMT Orange Tools
CMTDMM-001
€49.67
Ideal for use in woodworking, building construction and agriculture industries. The DMM­-001 is also an invaluable tool in the restoration field. Ideal for locating moisture in carpets and sub-flooring. Ultra-sensitive Digital Moisture Meter easily detects hidden leaks in wood, concrete, plaster and carpet. Providing accurate moisture level readings...
View options
BAG-001 Shoulder Tool Bag BAG-001 Shoulder Tool Bag 2
System and accessories

BAG-001 Shoulder Tool Bag

CMT Orange Tools
CMTBAG-001
€25.82
- Top zipped wide opening design for easy approaching tools. - Hard rubber bottom keeps bag sturdy, protects content from falls. - 6 interior pockets plus 12 exterior pockets. - Ideal for carrying hand tools and other small to medium items & accessories. 0
View options
Small Stock Holder Small Stock Holder 2
System and accessories

Small Stock Holder

CMT Orange Tools
CMTPTC-1
€59.69
By far, handling small stock on your router table is probably one of the most difficult challenges any professional woodworker has to face! Keeping all ten fingers attached to your hands is definitely a priority.   This is why the CMT Small Stock Holder is an absolute necessity in the workshop! It safely ensures proper stabilization of smaller...
View options
12 corner radius router template set 12 corner radius router template set 2
System and accessories

12 corner radius router template set

CMT Orange Tools
CMTTMP-R12
€67.55
Our useful 3-piece corner radius template set includes 8mm (5/16”) thick acrylic templates that will allow you to make 12 different radii (3 per template) by using a flush trim or a pattern bit (sold separately). Included with the templates you will also find 4 alignment pins and 4 wood screws. Use the pins to align the template onto your workpiece, then...
View options
Organizer Organizer 2
System and accessories

Organizer

CMT Orange Tools
CMT03.51
€5.22
When you are working on a project you need your tools organized and close to hand. CMT’s bit organizer is the perfect solution. This handy moulded tray conveniently holds up to 100 router, drill or boring bits. By using our interchangeable bushings, the organizer will accept any shank diameter. Bushings available on the following sizes: 6mm (15/64”) -...
View options
Half blind template Half blind template 2
System and accessories

Half blind template

CMT Orange Tools
CMTCMT300-T064
€97.77
Supplied with Ø7,8x4mm (5/16" x 5/32") precision guide          899.003.00   To use with CMT dovetail bits:  Ø6x8mm (15/64” x 5/16”) HW bit - Ø6mm (15/64”) shank          718.060.11 Ø6,35x8,3mm (1/4" x 5/16") HW bit - Ø6,35mm (1/4") shank     818.064.110
View options
Through dovetail templates Through dovetail templates 2
System and accessories

Through dovetail templates

CMT Orange Tools
CMTCMT300-T129-T190
€102.20
CMT300-T129 Supplied with Ø11,1x4mm (7/16" x 5/32") precision guide 899.004.00 To be used with CMT straight router bits: Ø8x25mm (5/16" x 1") HW bit - Ø6,35mm (1/4") shank 811.081.11 Ø8x30mm (5/16" x 1-3-16") HW bit - Ø8mm (5/16") shank 912.080.11 To use with CMT dovetail bits: Ø12,7x20mm (1/2" x 25/32") HW bit - Ø6,35mm (1/4") shank 818.129.11 Ø12,7x20mm...
View options
Universal hinges boring system Universal hinges boring system 2
System and accessories

Universal hinges boring system

CMT Orange Tools
CMTCMT333
€181.85
The innovative CMT333 Hinge Boring System with 3 spindle-heads allows you to bore holes for any hinge brand. The universal modular base supports the installation of many boring heads engineered by worldwide leading companies in the sector. Use the CMT333 hinge cup drill guide on all hand-held or standing drill press tools.  ...
View options
Kitchen Worktop Jig Kitchen Worktop Jig 2
System and accessories

Kitchen Worktop Jig

CMT Orange Tools
CMTCMT650
€194.22
The Jig for Perfect joinery! For use on worktops ranging from 420mm to 650mm in width. Designed to cut kitchen worktops joints with any type of router.   Letter code system for different operations speeds up and simplifies jig work.   Dimensions: 880 x 300 x 10mm.   JIG INCLUDES: 1 Phenolic template 3 Zinc-coated steel guide...
View options
Universal boring template Universal boring template 2
System and accessories

Universal boring template

CMT Orange Tools
CMTCMT900
€211.78
For dowelling into a surface. For shelf supports. For hinges.   CMT’s universal boring template has been designed for precise and productive manual dowelling of furniture elements by using 32mm Euro-System screws, for boring shelf supports with 3mm or 5mm in diametre and for making and marking hinge holes. By using this template you can prebore the...
View options
Pocket-Pro joinery system Pocket-Pro joinery system 2
System and accessories

Pocket-Pro joinery system

CMT Orange Tools
CMTPPJ
€94.28
For fast, easy and accurate cabinet & furniture construction. Designed by CMT and professional cabinetmakers, this new system allows you to make rock-solid pocket hole joints in stock 12,7mm (1/2”) to 41,3mm (1-5/8”) thick with unprecedented speed and accuracy. The heart of the Pocket-Pro system is our unique moulded jig, which features hardened...
View options
Digital angle finder Digital angle finder 2
System and accessories

Digital angle finder

CMT Orange Tools
CMTDAF-001
€68.71
This digital angle finder is a multi-functional tool for many measuring applications. Easy to operate, the base unit carries the electronics featuring clear detailed LCD display, a pair of levelling vials and a pivoting measuring arm. When the arm is extended, the angle created with the base is indicated clearly on digital read-out to the nearest...
View options
Panalign strips Panalign strips 2
System and accessories

Panalign strips

CMT Orange Tools
CMTPNL
€8.55
Beautiful panel doors can be ruined by a poorly-aligned panel. Next time, slip panalign strips into the rails to keep panels perfectly centred while allowing for expansion. Unlike carpet foam, which eventually loses elasticity and ceases to work, the rubber in panalign strips is specially designed to spring back indefinitely. The rectangular shape makes...
View options
Edge banding iron Edge banding iron 2
System and accessories

Edge banding iron

CMT Orange Tools
CMTDET-004
€74.38
Apply pre-glued edge banding easily and accurately. The iron non-stick surface allows smooth and easy application. The thermostatically controlled short preheat time gets you working quicker. Includes heat resistant metal base to place iron when not in use.   Includes thermostatic heat control. Non-stick coating. Specially...
View options
4-piece bench block set 4-piece bench block set 2
System and accessories

4-piece bench block set

CMT Orange Tools
CMTBBS-001
€23.86
These blocks are great for holding your workpiece without any clamps. Their anti-slip surface grip both your bench top and the underside of your workpiece. Raise your work above the bench and benefit from plenty of clearance for your router bits, cutters, etc.0
View options
PGD-1 - Adjustable Precision Router Dado Jig PGD-1 - Adjustable Precision Router Dado Jig 2
System and accessories

PGD-1 - Adjustable Precision Router Dado Jig

CMT Orange Tools
CMTPGD-1
€111.07
PGD-1 is the perfect router dado jig to make precise crafting dados, rabbets and joints quickly and with confidence. This CMT tool is easy to use and fully adjustable. You can create dadoes of any size using the same router by simply increasing the number of passes you make. Sturdy construction built to last. Smooth rolling steel...
View options
Box joint templates Box joint templates 2
System and accessories

Box joint templates

CMT Orange Tools
CMTCMT300-T080
€102.20
CMT300-T080 Supplied with Ø11,1x4mm (7/16" x 5/32") precision guide 899.004.00 To be used with CMT straight router bits: Ø8x25mm (5/16" x 1") HW bit - Ø6,35mm (1/4") shank 811.081.11 Ø8x30mm (5/16" x 1-3/16") HW bit - Ø8mm (5/16") shank 912.080.11   CMT300-T127  To be used with CMT straight router bits:  Ø12,7x30mm (1/2" x 1-3/16") HW bit -...
View options
Push Stick Push Stick 2
System and accessories

Push Stick

CMT Orange Tools
CMT999.110.41
€12.83
Maintaining control of small stock during drilling operations can be quite challenging, as hand safety is imperative. We recommend our Small Stock Holder 991.110.41, which guarantee safe precision drilling.0
View options
Push Block Push Block 2
System and accessories

Push Block

CMT Orange Tools
CMT999.110.42
€11.43
Maintaining control of small stock during drilling operations can be quite challenging, as hand safety is imperative. We recommend our Push Block 991.110.42, which guarantee safe precision drilling.0
View options
Interchangeable Torque Wrench 20~200 Nm Interchangeable Torque Wrench 20~200 Nm 2
System and accessories

Interchangeable Torque Wrench 20~200 Nm

CMT Orange Tools
CMTTW-200
€61.33
The interchangeable torque wrench is supplied inside a protective case. Inside, in addition to the instruction manual, you’ll find the calibration certificate (unique for each instrument) according to DIN ISO 6789 & ASME B107.300-2010. TECHNICAL DETAILS: • Range:.............. 20~200 Nm (10-150 lbf-ft) • Resolution:.......... 1 Nm •...
View options
ADJUSTABLE TORQUE SCREWDRIVER SET 1~6 Nm ADJUSTABLE TORQUE SCREWDRIVER SET 1~6 Nm 2
System and accessories

ADJUSTABLE TORQUE SCREWDRIVER SET 1~6 Nm

CMT Orange Tools
CMTTW-006
€199.81
The TW-006 adjustable torque screwdriver by CMT is supplied inside a sturdy protective case and comes equipped with 20 bits, instruction manual and calibration certificate (unique for each instrument) indicating compliance with DIN ISO 6789 and ASME B107.300-2010 standards.   Technical features: Range................... 1~6 Nm...
View options
CFC-002 ADJUSTABLE CORNER FRAME CLAMPS CFC-002 ADJUSTABLE CORNER FRAME CLAMPS 2
System and accessories

CFC-002 ADJUSTABLE CORNER FRAME CLAMPS

CMT Orange Tools
CMTCFC-002
€47.89
CMT Adjustable Corner Frame Clamps will easily create the perfect 90 ° angle or handy T-joints typical in shelving, cabinets and frame applications using boards of variable thicknesses from 6.35 to 25.4 mm (1/4 “- 1”). These clamps allow you to work independently, and above all, hands-free to glue, dry-fit, nail, screw, or square your joint securely and...
View options
Latex Coated Gloves Latex Coated Gloves 2
System and accessories

Latex Coated Gloves

CMT Orange Tools
CMTGLA
€2.72
These protective gloves are not only comfortable but offer high elasticity, impressive grip as well as good resistance to abrasion, perforation and tears. CE Certified and Mechanical Hazards EN 388:2016 compliant (2132X). Available in three sizes!0
View options
Handle for reciprocating saw Handle for reciprocating saw 2
System and accessories

Handle for reciprocating saw

CMT Orange Tools
CMTJS001
€16.09
Handle for reciprocating saw blades with 12.7mm - 1/2 "universal shank. Practical, functional, ergonomic and featuring non-slip material. Screw for mechanical fastening.0
View options
Contour Duplicator Gauge Contour Duplicator Gauge 2
System and accessories

Contour Duplicator Gauge

CMT Orange Tools
CMTCDG-001
€20.53
For precision tracing of shapes, even curved, in a variety of materials. Easy sliding calipers designed to mold and duplicate any form: pipes, columns, tubing, regular and irregular walls, baseboards, crown molding, door and window framework.   For use on applications such as tile, wood, wood derivatives, composite, porcelain, ceramic,...
View options
PORTABLE 35mm HINGE BORING JIG PORTABLE 35mm HINGE BORING JIG 2
System and accessories

PORTABLE 35mm HINGE BORING JIG

CMT Orange Tools
CMTCMT335
€69.88
A practical and precise solution for installing 35 mm hinges. Ideal for carpenters, installers, and DIYers, this portable jig allows for quick and accurate drilling directly on-site, without bulky equipment. Compatible with handheld drills, it's designed to deliver professional results in any situation.0
View options
BLUM, SALICE, HÄFELE and HETTICH hinge boring head BLUM, SALICE, HÄFELE and HETTICH hinge boring head 2
System and accessories

BLUM, SALICE, HÄFELE and HETTICH hinge boring head

CMT Orange Tools
CMTCMT334
€379.25
The innovative CMT334 Universal Hinge Boring Head employs three spindles which allow you to bore the holes for all of the major hinge brands. The head can be utilized on boring and point to point machines.Bits not included:
View options
Universal dovetail jig Universal dovetail jig 2
System and accessories

Universal dovetail jig

CMT Orange Tools
CMTCMT300
€23.09
Dovetail joints give a touch of craftsmanship to your work, but many woodworkers avoid these joints, because of their apparent complexity. CMT’s new 305mm (12") dovetail jig is the fast easy solution!Thanks to precise templates, permanent stops and easy adjustments, we have taken the “tinkering” out of the dovetail joinery. Simply clamp your workpiece...
View options
CABINET HARDWARE JIG GUIDE FOR HANDLES CABINET HARDWARE JIG GUIDE FOR HANDLES 2
System and accessories

CABINET HARDWARE JIG GUIDE FOR HANDLES

CMT Orange Tools
CMTCHG-001
€59.62
 Quick Assembly & Precise Positioning   Portable & Easy to use  Reversible design for Left & Right Doors   TECHNICAL DETAILS: Vertical scale: .............................0~10” (0~250 mm) Horizontal scale (each side): ......0~8” (0~200 mm) Dimensions: ...............................16.15" x 12.2” x 1.65”...
View options
Formula 2050: Blade & Bit Cleaner Formula 2050: Blade & Bit Cleaner 2
System and accessories

Formula 2050: Blade & Bit Cleaner

CMT Orange Tools
CMTFormula2050
€16.57
An incredibly effective cleaner for all cutting tools! Saw shops know how to get the most out of cutting tools. They also know that pitch and residues that accumulate on tools greatly shorten the life of carbide and compromise performance. We asked various blade sharpeners to test our Formula 2050 and they all rated it as an excellent product. Why is...
View options
Formula 998: Lubricant for Wood, Neutralizes Resin Formula 998: Lubricant for Wood, Neutralizes Resin 2
System and accessories

Formula 998: Lubricant for Wood, Neutralizes Resin

CMT Orange Tools
CMTFormula998
€19.13
Neutralizes resin, preventing it from being stuck on chips and sawdust. Cleans knobs, barbell handles, etc. Anti-corrosion action on woodworking machine table. Excellent against humidity.   Instruction: Spray or use a brush to apply the product on machine parts. A uniform layer of product on surfaces helpsthe workpiece slide...
View options
Digital angle gauge Digital angle gauge 2
System and accessories

Digital angle gauge

CMT Orange Tools
CMTDAG-001
€51.07
Ideal for miter saws and table saws.  Precisely sets saw blade bevel angles.    • Automatic LCD backlight.   • Large display for easy digital reading.   • Measurements in absolute or relative mode.   • Angles displayed in degrees.   • Automatic digit inversion for overhead measurements....
View options
796 - “ER20” chucks 796 - “ER20” chucks 2
System and accessories

796 - “ER20” chucks

CMT Orange Tools
CMT796ER20
€56.35
TECHNICAL DETAILS: Super strength steel. Precisely machined for accuracy.   Collet not included.   The TW-200 Torque Wrench is recommended for the proper fastening of clamping nuts.  
View options
Showing 1-41 of 41 item(s)

Filters

Product added to wishlist