System and accessories

Flexible Templates for Curved & Arched Routing Flexible Templates for Curved & Arched Routing 2
System and accessories

Flexible Templates for Curved & Arched Routing

CMT Orange Tools
CMTTMP-1000
€107.64
The CMT flexible template is easy to screw on any kind of wooden panels, MDF or chipboard for creating forms, arcs and curved elements easily and rapidly. In order to fix your template you can use countersunk screws, which are widely available on the market. The CMT template is made of a highly-resistant flexible plastic, which can be tied in knots...
View options
Digital Height Gauge Digital Height Gauge 2
System and accessories

Digital Height Gauge

CMT Orange Tools
CMTDHG-001
€46.18
Digital height gauge (mm/inch/fraction).  Precise measurements for: Router bits, Saw blades, Band saw blades, Cutter heads, Drill bits, Holes depth. Measuring ruler with locking screw. Self standing with magnets. Depht pin to measure narrow holes or channels. Instruction manual.   Technical Details: - Measuring range:...
View options
Double-edge trimmer Double-edge trimmer 2
System and accessories

Double-edge trimmer

CMT Orange Tools
CMTDET-001
€22.94
Attach this trimmer to your workpiece, press both ends against the board for a cutting range between 13mm (1/2”) and 25mm (1”), move the trimmer in the correct direction indicated by the arrow. This will cut on both sides easily. The first cutter will cut straight, the second one can be adjusted for a tapering cut. Both cutters are...
View options
Professional Straight Edge Clamps Professional Straight Edge Clamps 2
System and accessories

Professional Straight Edge Clamps

CMT Orange Tools
CMTPGC
€45.16
Used as a fence for your bandsaw, drill press or even as an auxiliary fence on your router table or table saw, CMT’s professional straight edge clamps represent a two-in-one tool, allowing you to either use them as an edge guide, or to easily clamp your boards or any object for woodworking. Available in different sizes.   Here are the main...
View options
PGC - Back-to-Back Connectors for Straight Edge Clamps (optional) PGC - Back-to-Back Connectors for Straight Edge Clamps (optional) 2
System and accessories

PGC - Back-to-Back Connectors for Straight Edge Clamps (optional)

CMT Orange Tools
CMTPGC.ric
€28.45
Lay two more straight edge clamps on the back of the other pair of straight edge clamps and secure them by using your back-to-back connectors.  Fasten the bottom jaw pads to the table top and clamp wood with the top jaw pads. Thanks to the low profile jaws your work surface is never obstructed.  The back-to-back straight edge clamps can...
View options
Edge banding end trimmer Edge banding end trimmer 2
System and accessories

Edge banding end trimmer

CMT Orange Tools
CMTDET-002
€52.55
An indispensable tool for easy and safe end trimming after edge banding.   Position the tool on the banding, press down on the handle to operate the blade in a shearing action. The cutting knives are interchangeable, so when the cutting knife becomes dull, you can simply replace it with the anvil knife for a double lifetime.   For cutting...
View options
Laminate/veneered cutter Laminate/veneered cutter 2
System and accessories

Laminate/veneered cutter

CMT Orange Tools
CMTDET-003
€232.37
A very useful hand tool for clean, splinter-free cuts on laminates and veneered with no waste. Place your material into the fence provided and have the cutter run along the edge of the panel. The two opposing steel-made circular cutting blades mounted on roller bearings will trace the cutting line. Use the micrometer knob on the top of the tool to set...
View options
7-bushing template guide kit 7-bushing template guide kit 2
System and accessories

7-bushing template guide kit

CMT Orange Tools
CMTCMT-TGA
€77.34
A practical 7-bushing kit that will extend the possibilities of your router. For template-controlled operations such as dovetailing, stair routing, hinge butt routing, lock face routing and more general template tasks. These template guides can be used with any router featuring a 30mm (1-3-/16”) bore baseplate. Fits the most popular routers. Some routers...
View options
Digital moisture meter Digital moisture meter 2
System and accessories

Digital moisture meter

CMT Orange Tools
CMTDMM-001
€49.67
Ideal for use in woodworking, building construction and agriculture industries. The DMM­-001 is also an invaluable tool in the restoration field. Ideal for locating moisture in carpets and sub-flooring. Ultra-sensitive Digital Moisture Meter easily detects hidden leaks in wood, concrete, plaster and carpet. Providing accurate moisture level readings...
View options
BAG-001 Shoulder Tool Bag BAG-001 Shoulder Tool Bag 2
System and accessories

BAG-001 Shoulder Tool Bag

CMT Orange Tools
CMTBAG-001
€25.82
- Top zipped wide opening design for easy approaching tools. - Hard rubber bottom keeps bag sturdy, protects content from falls. - 6 interior pockets plus 12 exterior pockets. - Ideal for carrying hand tools and other small to medium items & accessories. 0
View options
Small Stock Holder Small Stock Holder 2
System and accessories

Small Stock Holder

CMT Orange Tools
CMTPTC-1
€59.69
By far, handling small stock on your router table is probably one of the most difficult challenges any professional woodworker has to face! Keeping all ten fingers attached to your hands is definitely a priority.   This is why the CMT Small Stock Holder is an absolute necessity in the workshop! It safely ensures proper stabilization of smaller...
View options
12 corner radius router template set 12 corner radius router template set 2
System and accessories

12 corner radius router template set

CMT Orange Tools
CMTTMP-R12
€67.55
Our useful 3-piece corner radius template set includes 8mm (5/16”) thick acrylic templates that will allow you to make 12 different radii (3 per template) by using a flush trim or a pattern bit (sold separately). Included with the templates you will also find 4 alignment pins and 4 wood screws. Use the pins to align the template onto your workpiece, then...
View options
Organizer Organizer 2
System and accessories

Organizer

CMT Orange Tools
CMT03.51
€5.22
When you are working on a project you need your tools organized and close to hand. CMT’s bit organizer is the perfect solution. This handy moulded tray conveniently holds up to 100 router, drill or boring bits. By using our interchangeable bushings, the organizer will accept any shank diameter. Bushings available on the following sizes: 6mm (15/64”) -...
View options
Half blind template Half blind template 2
System and accessories

Half blind template

CMT Orange Tools
CMTCMT300-T064
€97.77
Supplied with Ø7,8x4mm (5/16" x 5/32") precision guide          899.003.00   To use with CMT dovetail bits:  Ø6x8mm (15/64” x 5/16”) HW bit - Ø6mm (15/64”) shank          718.060.11 Ø6,35x8,3mm (1/4" x 5/16") HW bit - Ø6,35mm (1/4") shank     818.064.110
View options
Through dovetail templates Through dovetail templates 2
System and accessories

Through dovetail templates

CMT Orange Tools
CMTCMT300-T129-T190
€102.20
CMT300-T129 Supplied with Ø11,1x4mm (7/16" x 5/32") precision guide 899.004.00 To be used with CMT straight router bits: Ø8x25mm (5/16" x 1") HW bit - Ø6,35mm (1/4") shank 811.081.11 Ø8x30mm (5/16" x 1-3-16") HW bit - Ø8mm (5/16") shank 912.080.11 To use with CMT dovetail bits: Ø12,7x20mm (1/2" x 25/32") HW bit - Ø6,35mm (1/4") shank 818.129.11 Ø12,7x20mm...
View options
Universal hinges boring system Universal hinges boring system 2
System and accessories

Universal hinges boring system

CMT Orange Tools
CMTCMT333
€181.85
The innovative CMT333 Hinge Boring System with 3 spindle-heads allows you to bore holes for any hinge brand. The universal modular base supports the installation of many boring heads engineered by worldwide leading companies in the sector. Use the CMT333 hinge cup drill guide on all hand-held or standing drill press tools.  ...
View options
Kitchen Worktop Jig Kitchen Worktop Jig 2
System and accessories

Kitchen Worktop Jig

CMT Orange Tools
CMTCMT650
€194.22
The Jig for Perfect joinery! For use on worktops ranging from 420mm to 650mm in width. Designed to cut kitchen worktops joints with any type of router.   Letter code system for different operations speeds up and simplifies jig work.   Dimensions: 880 x 300 x 10mm.   JIG INCLUDES: 1 Phenolic template 3 Zinc-coated steel guide...
View options
Universal boring template Universal boring template 2
System and accessories

Universal boring template

CMT Orange Tools
CMTCMT900
€211.78
For dowelling into a surface. For shelf supports. For hinges.   CMT’s universal boring template has been designed for precise and productive manual dowelling of furniture elements by using 32mm Euro-System screws, for boring shelf supports with 3mm or 5mm in diametre and for making and marking hinge holes. By using this template you can prebore the...
View options
Pocket-Pro joinery system Pocket-Pro joinery system 2
System and accessories

Pocket-Pro joinery system

CMT Orange Tools
CMTPPJ
€94.28
For fast, easy and accurate cabinet & furniture construction. Designed by CMT and professional cabinetmakers, this new system allows you to make rock-solid pocket hole joints in stock 12,7mm (1/2”) to 41,3mm (1-5/8”) thick with unprecedented speed and accuracy. The heart of the Pocket-Pro system is our unique moulded jig, which features hardened...
View options
Digital angle finder Digital angle finder 2
System and accessories

Digital angle finder

CMT Orange Tools
CMTDAF-001
€68.71
This digital angle finder is a multi-functional tool for many measuring applications. Easy to operate, the base unit carries the electronics featuring clear detailed LCD display, a pair of levelling vials and a pivoting measuring arm. When the arm is extended, the angle created with the base is indicated clearly on digital read-out to the nearest...
View options
Panalign strips Panalign strips 2
System and accessories

Panalign strips

CMT Orange Tools
CMTPNL
€8.55
Beautiful panel doors can be ruined by a poorly-aligned panel. Next time, slip panalign strips into the rails to keep panels perfectly centred while allowing for expansion. Unlike carpet foam, which eventually loses elasticity and ceases to work, the rubber in panalign strips is specially designed to spring back indefinitely. The rectangular shape makes...
View options
Edge banding iron Edge banding iron 2
System and accessories

Edge banding iron

CMT Orange Tools
CMTDET-004
€74.38
Apply pre-glued edge banding easily and accurately. The iron non-stick surface allows smooth and easy application. The thermostatically controlled short preheat time gets you working quicker. Includes heat resistant metal base to place iron when not in use.   Includes thermostatic heat control. Non-stick coating. Specially...
View options
4-piece bench block set 4-piece bench block set 2
System and accessories

4-piece bench block set

CMT Orange Tools
CMTBBS-001
€23.86
These blocks are great for holding your workpiece without any clamps. Their anti-slip surface grip both your bench top and the underside of your workpiece. Raise your work above the bench and benefit from plenty of clearance for your router bits, cutters, etc.0
View options
PGD-1 - Adjustable Precision Router Dado Jig PGD-1 - Adjustable Precision Router Dado Jig 2
System and accessories

PGD-1 - Adjustable Precision Router Dado Jig

CMT Orange Tools
CMTPGD-1
€111.07
PGD-1 is the perfect router dado jig to make precise crafting dados, rabbets and joints quickly and with confidence. This CMT tool is easy to use and fully adjustable. You can create dadoes of any size using the same router by simply increasing the number of passes you make. Sturdy construction built to last. Smooth rolling steel...
View options
Showing 1-24 of 41 item(s)

Filters

Product added to wishlist