List of products by brand CMT Orange Tools

Solid carbide upcut spiral bits with chipbreaker Solid carbide upcut spiral bits with chipbreaker 2
HM spiral cutter

Solid carbide upcut spiral bits with chipbreaker

CMT Orange Tools
CMT195
€62.17
Sharp technology with a new twist A special super-micrograin carbide formulation was created to produce and hold a keen cutting edge. The new low-angle spiral is designed specifically to shear wood cleanly and provide efficient chip ejection. The tools run cooler and the edges last longer. Increased feed rate and improved cutting quality for enhanced...
View options
Solid carbide upcut with spiral bits chip-breaker for 60° V-point locksets Solid carbide upcut with spiral bits chip-breaker for 60° V-point locksets 2
HM spiral cutter

Solid carbide upcut with spiral bits chip-breaker for 60° V-point locksets

CMT Orange Tools
CMT195.143/163
€211.62
Sharp technology with a new twist A special super-micrograin carbide formulation was created to produce and hold a keen cutting edge. The new low-angle spiral is designed specifically to shear wood cleanly and provide efficient chip ejection. The tools run cooler and the edges last longer. Increased feed rate and improved cutting quality for enhanced...
View options
Solid carbide downcut spiral bits with chipbreaker Solid carbide downcut spiral bits with chipbreaker 2
HM spiral cutter

Solid carbide downcut spiral bits with chipbreaker

CMT Orange Tools
CMT196
€62.17
Sharp technology with a new twist A special super-micrograin carbide formulation was created to produce and hold a keen cutting edge. The new low-angle spiral is designed specifically to shear wood cleanly and provide efficient chip ejection. The tools run cooler and the edges last longer. Increased feed rate and improved cutting quality for enhanced...
View options
Complete set for MDF doors Complete set for MDF doors 2
Router cutters for CNC

Complete set for MDF doors

CMT Orange Tools
CMT615.004.01
€738.22
Open some new doors with CMT. Our 4-piece set includes the most popolar profile to make MDF panel doors for kitchens and bathrooms. Each bit is made from bar stock steel and is equipped with 5 differents profile knives allowing enormous possibilities for easy and economical construction. The highest materials, the lowest tolerance in balancing and the...
View options
Complete set for decorating on MDF Complete set for decorating on MDF 2
Router cutters for CNC

Complete set for decorating on MDF

CMT Orange Tools
CMT616
€901.42
This unique system includes a tool body with 22 profile knives designed for multiple applications on your CNC routers. Ideal for MDF, laminates, veneers, plastic, wood and solid surface materials.   Technical details: Knives 20x20x2mm. We recommend re-sharpening the knives on profile cutting edge.   Remark: tool body and insert...
View options
ER25 precision collets ER25 precision collets 2
CNC chucks and collets

ER25 precision collets

CMT Orange Tools
CMT184-ER25
€24.02
  Technical details: Replaceable Standard Precision 0.015 collets. 0; -0,7mm wide clamping tolerance. Replaceable High Precision 0.005 collets. 0; -1mm wide clamping tolerance. Suitable for most conical chucks. Fit most tapered spindle noses.   Special dimensions available on request.0
View options
MDF door bit bodies MDF door bit bodies 2
Router cutters for CNC

MDF door bit bodies

CMT Orange Tools
CMT615.XXX
€96.29
Extremely precise bits to make MDF panel doors for kitchens and bathrooms. Each bit is made from bar stock steel and the highest quality tungsten materials.0
View options
MDF door knives MDF door knives 2
Router cutters for CNC

MDF door knives

CMT Orange Tools
CMT615.ABCD
€93.81
5 different profile knives for several production possibilities. Achieve excellent results on all your MDF doors!0
View options
Universal Assembly Supports for Chucks Universal Assembly Supports for Chucks 2
CNC chucks and collets

Universal Assembly Supports for Chucks

CMT Orange Tools
CMT183-HSK/ISO
€256.40
For HSK-63, BT40, ISO40 DIN 2080, SK40 DIN 69871, CAPTO® C6 and ISO30, DIN 2080, SK30 DIN 69871, HSK50, CAPTO® C5 chucks.   CMT now offers new universal assembly supports for HSK-63F and ISO30 chucks. Thanks to the bi-directional roller bearings, which clamp the Left-hand rotation to the flange, the system offers the highest...
View options
Adjustable chamfering CNC cutter Adjustable chamfering CNC cutter 2
Knife cutters

Adjustable chamfering CNC cutter

CMT Orange Tools
CMT663.201.11
€776.99
Technical details: Tool body in steel; 2 reversible HWM knives 39,5x12x1,5mm [Z2]; Peripheral cutting on both sides; Adjustable swivelling blade (Rotates at 7,5° intervals; Precision = 7,5°); Swivelling range 0-45° towards top, and 0-90° towards bottom.   Inclination: Min. Max -45° +90°    ...
View options
Diamond spiral router cutters with shear angle Diamond spiral router cutters with shear angle 2
Polycrystalline diamond cutters

Diamond spiral router cutters with shear angle

CMT Orange Tools
CMT143
€458.29
TECHNICAL DETAILS: • Super strength steel. • DP cutting edge H4. • HW plunging tip for diagonal plunge-cutting (Z-axis tool entrance). • Resharpenable cutter (max 8-10 times). • Max feed speed 25 m/min. Item numbers 143.221.61, 143.223.61, 143.225.61, 143.227.61 and 143.228.61 are available on request.For use on CNC routers for jointing,...
View options
Spoilboard surfacing router cutters with insert knives Spoilboard surfacing router cutters with insert knives 2
Router cutters for CNC

Spoilboard surfacing router cutters with insert knives

CMT Orange Tools
CMT663
€171.45
TECHNICAL FEATURES: Super strength steel. 3 cutting edges (Z3). 4 cutting edges (Z4).   The new router bit for CNC routers is ideal for fast removal of material over a large surface area leaving an improved finish at the bottom of the cut. Used on soft and hardwood, particle board and MDF. The cutter uses 4-sided inserts in super...
View options
DP - Polycrystalline Router Cutters with Axial Cutting Edge - LONG LIFE DP - Polycrystalline Router Cutters with Axial Cutting Edge - LONG LIFE 2
Polycrystalline diamond cutters

DP - Polycrystalline Router Cutters with Axial Cutting Edge - LONG LIFE

CMT Orange Tools
CMT141.neg
€105.77
TECHNICAL DETAILS: • SPECIAL SUPER-MICROGRAIN CARBIDE FORMULATION. • In new solid carbide. • Straight cutting edge. • DP "H3". • Resharpenable cutter (max 4 times). • Feed speed on MDF 3-4 m/min for cutter Ø6 and Ø8mm and 4-5m/minute for Ø10and Ø12mm. For boring, contour cutting and panel sizing on veneered and wood-based materials. For use...
View options
Solid Carbide Upcut Spiral Bits for Aluminum and PVC Solid Carbide Upcut Spiral Bits for Aluminum and PVC 2
HM spiral cutter

Solid Carbide Upcut Spiral Bits for Aluminum and PVC

CMT Orange Tools
CMT186
€33.66
TECHNICAL DETAILS: • Premium quality HWM; • 2 spiral cutting edges [Z2]; • Extra-fine finish; • Upward chip ejection. Used for ripping, template routing and panel sizing on plastic materials and aluminum at high feed speed. Can be used on machining centers, point to point machines, CNC routers and hand held routers equipped with chucks or adapters..
View options
990.4 - Shield, spacer ring, key and screw kit 990.4 - Shield, spacer ring, key and screw kit 2
Spare parts and accessories

990.4 - Shield, spacer ring, key and screw kit

CMT Orange Tools
CMT990.4-KIT
€10.74
The 990.4 kits were designed by CMT to give the opportunity to always have essential and extremely versatile accessories at hand, all in a single set. These kits include the components necessary for routine maintenance operations, such as various types of shields, screws, keys and spacer rings.0
View options
Box joint templates Box joint templates 2
System and accessories

Box joint templates

CMT Orange Tools
CMTCMT300-T080
€102.20
CMT300-T080 Supplied with Ø11,1x4mm (7/16" x 5/32") precision guide 899.004.00 To be used with CMT straight router bits: Ø8x25mm (5/16" x 1") HW bit - Ø6,35mm (1/4") shank 811.081.11 Ø8x30mm (5/16" x 1-3/16") HW bit - Ø8mm (5/16") shank 912.080.11   CMT300-T127  To be used with CMT straight router bits:  Ø12,7x30mm (1/2" x 1-3/16") HW bit -...
View options
Showing 325-360 of 1015 item(s)

Filters

Filter By

Categories

Categories

Price

Price

  • €1.00 - €2,539.00

Cutting height

Maximum stock thickne

Kerf thickness

a

Radius

Material

Diameter

Totale length

Shank diameter

Number of cutting edges

A

Cutting depth

Bore diameter

Pin hole

b

d

DIM

I1

V

H

#N/A

PM

KW

B

LB

PR

R1

Product added to wishlist