Industrial router bits

Straight router bits, long series Straight router bits, long series 2
Industrial router bits

Straight router bits, long series

CMT Orange Tools
CMT7/8/912
€29.85
Beautiful clean edge on your finished piece These razor-sharp, double-faced cutters made of special Fatigue Proof® steel and micrograin carbide can withstand even the heaviest work load and still give you a smooth, precise cut every time. Exceptional chip ejection to allow cleaner and more constant cutting. Surface of all CMT bits is protected with...
View options
Router cutters Router cutters 2
Industrial router bits

Router cutters

CMT Orange Tools
CMT177HW
€38.41
TECHNICAL FEATURES: Super strength steel. 2 precision ground HW cutting edges (Z2). 1 HW plunge centre tip (Z1). Used for grooving, jointing and general routing operation on solid wood, wood composites, plastics and laminates. Can be used on machining centres, CNC routers and hand-held routers.
View options
Adjustable roundover & bevel router bits Adjustable roundover & bevel router bits 2
Industrial router bits

Adjustable roundover & bevel router bits

CMT Orange Tools
CMT8/900.623
€106.63
These new CMT bits are ideal for making new awesome creations! Create a double 4,76mm (3/16”) roundover profile, a double 45° bevel or even a mixed profile on your wood panels easily and in a cost-effective way! Interchangeable shims are included to allow for different stock thicknesses according to the board.   To be used on table-mounted...
View options
Flush trim router bits Flush trim router bits 2
Industrial router bits

Flush trim router bits

CMT Orange Tools
CMT8/906.690-691B
€60.16
These new innovative two-flute router bits are equipped with a double bearing and feature a down shear design, which allows for clean smooth cuts on many materials. Therefore it is no longer necessary to flip or move your tool if you need to ride it from either direction to the other side of your workpiece. You will benefit from this tool especially when...
View options
Adjustable double roundover router bits Adjustable double roundover router bits 2
Industrial router bits

Adjustable double roundover router bits

CMT Orange Tools
CMT8/900.622
€97.38
Create awesome furnishing decorations with these new CMT bits! They provide a double 2mm (5/64”) and 3mm (1/8”) roundover profile on your wood panels easily and in a cost-effective way! Interchangeable shims are included to allow for different stock thicknesses according to the board. To be used on table-mounted routers. Avoid using these bits in...
View options
4-Wing Cut Out Slot Cutters for Solid Surfaces 4-Wing Cut Out Slot Cutters for Solid Surfaces 2
Industrial router bits

4-Wing Cut Out Slot Cutters for Solid Surfaces

CMT Orange Tools
CMT8/922.033.11B
€108.19
This bit features two tungsten carbide-tipped cutting edges for carving out solid surface undermount bowls in composite. For use on hand-held routers. Bit also equipped with a non-marring Delrin®bearing to protect your surfaces.   Ideal for use with all composite materials:
View options
Stepped rebate router bits Stepped rebate router bits 2
Industrial router bits

Stepped rebate router bits

CMT Orange Tools
CMT965.121-122
€37.55
Router bit featuring 2 carbide-tipped cutting edges for producing double rebates on wood and wood composites. Designed for accepting library/bookcase shelving strips or for accommodating hardware into your window slots.  0
View options
Non-blocking combination trimmer bits Non-blocking combination trimmer bits 2
Industrial router bits

Non-blocking combination trimmer bits

CMT Orange Tools
CMT7/809.016
€30.87
CMT’s combination flush and bevel trim bits are perfect for executing superb precision finishing on laminates with ease. Achieve a great variety of angles without even changing the bit. Simply lower the bit cutting depth for precise right angle cuts or raise it to create rounded edges. Suitable for both soft and hardwood. These...
View options
Laser Point Bit Laser Point Bit 2
Industrial router bits

Laser Point Bit

CMT Orange Tools
CMT7/8/958
€36.53
This bit crafts delicate grooves and incisions with laser precision. Make one-of-a-kind effects with 30°/35°/60° bevel edges in one single run. Equipped with three super sharp cutting edges, this perfectly balanced bit allows you to work with incredible accuracy with no risk of burning. Raise the bit and produce a delicate fine point incision, or...
View options
Solid surface sink and trim bits with bearing Solid surface sink and trim bits with bearing 2
Industrial router bits

Solid surface sink and trim bits with bearing

CMT Orange Tools
CMT8/980.571-572
€44.62
Trim a sink cut-out flush with the bowl in stages using these "over-hang" and flush trim bits. The Delrin® bearings are tapered to match the slope of the bowl's side. A first pass with the over-hang bit cleans the cut-out edge, leaving a slight over-hang on the underside of the counter. A second pass with the flush-trim bit completes the operation. Made...
View options
Roundover router bits Roundover router bits 2
Industrial router bits

Roundover router bits

CMT Orange Tools
CMT7/8/938
€32.18
The smaller bearing on the CMT Beading bits makes a delicate inset at the base of the cut, giving you the advantage of an extra decorative option. Be sure to keep the black bearing washer right side up to correspond with the bearing rotation when reassembling the bearing. Improper reassembly can cause the bit to unscrew. All CMT roundover bits have a...
View options
Mortising router bits Mortising router bits 2
Industrial router bits

Mortising router bits

CMT Orange Tools
CMT7/8/901
€21.30
Equipped with thick carbide tips and negative shear angle design, CMT mortising bits guarantee flawless performance. Mortise perfect hinges with no splintered edges or rough bottoms. Mortising is a breeze on both natural wood and wood composites. Compatible with most mortising jigs. Complete with a top bearing guide, these bits are the perfect tool...
View options
Flush trim router bits Flush trim router bits 2
Industrial router bits

Flush trim router bits

CMT Orange Tools
CMT7/8/906
€39.49
We have designed a series of truly indispensable bits available in a wide range of sizes for your woodworking needs. For precision work on laminates or quick template work with excellent finishing.   Shop tips: these bits are excellent for making through mortises. Use a straight bit (#711.130.11) to groove the through mortise area,...
View options
DP Flush Trim Bits for Laminates DP Flush Trim Bits for Laminates 2
Industrial router bits

DP Flush Trim Bits for Laminates

CMT Orange Tools
CMT7/8/906.61
€121.56
These new super duty DP (polycrystalline diamond) bits represent the ultimate in the extensive line of CMT flush trim bits. Investing in CMT DP flush trim bits means saving time and money, as they last 40 times longer than conventional carbide-tipped flush trim bits.    Shop tips: after resharpening, replace bearing 791.003.11 (Ø12,7mm)...
View options
3-in-1 flush trim bits for MDF/laminates 3-in-1 flush trim bits for MDF/laminates 2
Industrial router bits

3-in-1 flush trim bits for MDF/laminates

CMT Orange Tools
CMT7/8/907
€30.00
3 in 1 new flush trim bits with Delrin® Triangular bearings are your best partner for laminate trimming. In fact, it solves three of the most common problems that occur when flush trimming:   1) The anti-stick properties of the Delrin® bearing greatly reduces the likelihood of freezing of the bearing from glue. 2) The extended guide surface...
View options
Straight router bits, short series Straight router bits, short series 2
Industrial router bits

Straight router bits, short series

CMT Orange Tools
CMT7/8/911
€22.23
If you are looking to get the most out of your time and money through more efficient production, but want nothing. This double edged cutter is made of special FATIGUE-PROOF® steel and micrograin carbide to withstand even the heaviest of workloads. The surface is protected with our trademark orange non-stick P.T.F.E. coating to help keep the bit...
View options
Pattern router bits, short series Pattern router bits, short series 2
Industrial router bits

Pattern router bits, short series

CMT Orange Tools
CMT7/8/911B
€35.99
Whether you’re a full-time professional woodworker or part-time woodworking enthusiast, the CMT pattern bit is a valuable tool providing unlimited template routing possibilities. Pair up these double-fluted bits with a template of your choice and produce distinctive cabinets, furniture pieces, signs, toys and personalize any other creative...
View options
Round nose router bits Round nose router bits 2
Industrial router bits

Round nose router bits

CMT Orange Tools
CMT7/8/914
€26.74
Personalize your doors, drawer fronts, panels or any surface you choose with your own signature motif. CMT round nose bits in solid carbide or with carbide tipped flutes let you create engraving in any wood or wood product. We offer a complete selection of diameters and cutting depths so you can achieve the effects you want. Mounted on your router...
View options
V-Grooving router bits (90°) V-Grooving router bits (90°) 2
Industrial router bits

V-Grooving router bits (90°)

CMT Orange Tools
CMT7/8/915
€27.83
These double cutting edge CMT bits offer an almost endless range of woodworking possibilities. Make clean, perfect cuts in panels, drawer fronts or even plasterboard panels; chamfer edges or engrave beautiful lettering.    Tips:  these bits perfectly chamfer at 45° angles (Two tools in one).   Items featuring 31,7mm (1-1/4”)...
View options
Bead & bull nose router bits Bead & bull nose router bits 2
Industrial router bits

Bead & bull nose router bits

CMT Orange Tools
CMT7/8/954
€36.31
CMT’s bull nose bits create elegantly finished edges on stair treads, window sills and shelves in one pass. Add a final touch by using a cutter with a bead diameter wider than the stock thickness.    Safety tips: to be used only on router tables equipped with a fence except in the case. Do not remove the workpiece while the bit is...
View options
Drawer lock router bits Drawer lock router bits 2
Industrial router bits

Drawer lock router bits

CMT Orange Tools
CMT7/8/955.002-502
€42.98
The key to success when constructing quality drawers is in the quality of the drawer lock bit you use. With CMT drawer lock bits you can make strong, perfectly fitting joints quickly and easily. Mill the drawer front with the inside face-down on the work table. Mill the sides of the drawer with the inside face placed vertical to the bit and fence, and...
View options
Ogee Bits Ogee Bits 2
Industrial router bits

Ogee Bits

CMT Orange Tools
CMT7/8/959
€43.99
These profiles are the mirror image of the traditional roman ogee. They add sharp defining details to the edges of cabinets and furniture, before rolling into a smooth convex shape.   Shop tips: this type of machining can be very challenging, for best results, multiple passes are recommended.  0
View options
Decorative Beading Bits Decorative Beading Bits 2
Industrial router bits

Decorative Beading Bits

CMT Orange Tools
CMT7/8/965.0-4-5
€42.98
This new CMT bit produces a classic single or double-edged bead. Ideal for creating a marked decorative effect on panel, door and drawer work.  0
View options
Classical bead router bits with bearing Classical bead router bits with bearing 2
Industrial router bits

Classical bead router bits with bearing

CMT Orange Tools
CMT7/8/965B
€46.18
This bit equipped with a bearing fixed on the shank gives you even more decorative possibilities such as inlays and groove work on furniture panels, vitrines, and drawer fronts. A wide flat bottom cut and positioning just above the wood surface, lets you see the results immediately.   0
View options
Dovetail router bits Dovetail router bits 2
Industrial router bits

Dovetail router bits

CMT Orange Tools
CMT7/818B
€35.60
The beautifully crafted dovetail joint is a classic that appeals to both professionals and novices alike.     Shop Tips: Two passes are recommended when routing dovetails with a template. Check that the dovetails have been cut through completely and smoothly before removing the workpiece. For even easier routing and less stress on your...
View options
Bowl and tray router bits Bowl and tray router bits 2
Industrial router bits

Bowl and tray router bits

CMT Orange Tools
CMT7/851B
€47.41
This CMT bit is ideal for making bowls, trays, boxes, cutting boards or any other specialty or craft item. The round corner of the bit shapes the inner radius while the sides and bottom create the smooth flat surfaces. We recommend using a top bearing for accurate  and easy pattern work.   Tips: use these bits on a table router with bearing...
View options
Hinge recesser router bits Hinge recesser router bits 2
Industrial router bits

Hinge recesser router bits

CMT Orange Tools
CMT7/902
€19.67
CMT hinge recesser bits are ideal for shallow lateral routing cuts such as recessing hinges.   Shop tips: corners will require final square with a hand or a corner chisel.     0
View options
Combination trimmer router bits Combination trimmer router bits 2
Industrial router bits

Combination trimmer router bits

CMT Orange Tools
CMT7/8/909-7/910
€32.03
CMT’s combination flush and bevel trim bits are perfect for executing a variety of superb precision finishing on laminates with ease without even changing the bit. Simply lower the bit cutting depth for precise right angle cuts or raise to 25° to create rounded edges. Suitable for both soft and hardwood. They feature two flutes for executing smoother...
View options
Chamfer router bits Chamfer router bits 2
Industrial router bits

Chamfer router bits

CMT Orange Tools
CMT7/903-4-5
€24.18
From a gently beveled edge to decorative chamfers in a variety of materials, CMT offers smooth results.0
View options
Weatherseal router bits Weatherseal router bits 2
Industrial router bits

Weatherseal router bits

CMT Orange Tools
CMT712.030/040-812.032
€26.35
Make your house more energy efficient by insulating old doors and windows.The CMT Weatherseal bit is the perfect bit to re-groove door and window frames to accommodate wind blocking inserts.Made of solid tungsten carbide for strength and endurance, these bits reach up to 12mm in depth without the risk of breakage.    Special double-sided design lets...
View options
Panel pilot router bits with guide Panel pilot router bits with guide 2
Industrial router bits

Panel pilot router bits with guide

CMT Orange Tools
CMT7/8/916
€26.35
How much time do you end up spending making openings in paneling, drywall, siding, doors or windows? With the CMT panel pilot bit, the job just got quicker. The point plunges smoothly and easily and the carbide edges cut clean and fast. All of this adds up to accurate cuts in less time and with less effort - great for trimming veneer as well...
View options
Combination trimmer bits Combination trimmer bits 2
Industrial router bits

Combination trimmer bits

CMT Orange Tools
CMT7/8/921
€24.80
Work to your highest standards with the CMT combination trimmer bits. Now you can cut, trim and bevel all laminates without having to change the bit. Achieve great results when making straight or angled cuts on both soft and hardwood. Three popular sizes, each with carbide-tipped cutting edges for efficient bevel and straight trimming.   Notice:...
View options
Slot cutters Slot cutters 2
Industrial router bits

Slot cutters

CMT Orange Tools
CMT7/8/922A/B
€36.77
Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, T-molding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of many arbors which include...
View options
Rabbeting router bits Rabbeting router bits 2
Industrial router bits

Rabbeting router bits

CMT Orange Tools
CMT7/8/935
€37.16
CMT carbide-faced rabbeting bits are fast and accurate - you can quickly produce inset doors and drawer fronts, make strong rabbet joints, mill perfect tongue and groove joints or any number of other jobs usually time consuming and difficult. Other possibilities for these tungsten carbide bits are illustrated below and on the following pages.  0
View options
Lettering router bits (60°) Lettering router bits (60°) 2
Industrial router bits

Lettering router bits (60°)

CMT Orange Tools
CMT7/8/949
€40.27
The ideal bit for engraving in wood, CMT designed this bit to make attractive signage without running the risk of splitting or chipping. Especially useful for letter carving in relief. A flattened bottom makes relief letter-making easy and accurate. This exclusive design allows you to efficiently level off the area around the base of the letter and...
View options
Keyhole router bits Keyhole router bits 2
Industrial router bits

Keyhole router bits

CMT Orange Tools
CMT7/8/950
€33.50
With the CMT keyhole bit you can make holes that keep your frames, plaques or any wall hanging perfectly straight and attached to the wall. The perfect way to securely mount wall hangings on screws and nails. Three new bits available to create slots for M5, M6, M8 hexagonal head bolt for removable joints.   Safety Tips: Be sure the...
View options
Panel Pilot Bits with Guide Panel Pilot Bits with Guide 2
Industrial router bits

Panel Pilot Bits with Guide

CMT Orange Tools
CMT7/8/953
€38.32
An absolutely indispensable bit for making cabinets. CMT Flush and V-Groove bits allow you to make cabinet front frames in 25mm stock that fit perfectly with the sides. The added V-cutter feature makes a decorative groove along  the hinge joint to hide the seam.    Shop Tips: For best results, leave less than 3mm overhang on cabinet...
View options
Three wing slot cutter Three wing slot cutter 2
Industrial router bits

Three wing slot cutter

CMT Orange Tools
CMT8/900.506
€99.80
Create slots, grooves and rabbets in materials from 3,2mm to 18mm in depth by using the adjustable CMT 3-Wing slot cutter set. See chart below for details on spacing and correct cutter combinations. Ideal for biscuit joints and milling perfect tongue and groove joints. This set includes: 4 carbide tipped cutters 3,2mm, 4mm, 4,8mm, 6,4mm 1 arbor...
View options
T-slot router bits T-slot router bits 2
Non disponibile
Industrial router bits

T-slot router bits

CMT Orange Tools
CMT8/950.1-6
€53.95
With the CMT T-slot bits you can make holes that keep your frames, plaques or any wall hanging perfectly straight and attached to the wall. These bits bore an entry hole in the wood, then proceed to cut holes and finished by boring a larger opening under the surface. The perfect way to securely mount wall hangings on screws and nails. Safety tips: be...
View options
Lock miter router bit set Lock miter router bit set 2
Industrial router bits

Lock miter router bit set

CMT Orange Tools
CMT8/955
€139.97
Use this pair of bits to produce octagonal shaped boxes and popular corner cabinetry for kitchens, kitchen islands, entertainment centres and corner hutches. This 22.5° Lock Miter set provides a strong tight joint even at 45°angles.  After the joints are machined, they can be glued and assembled or simply clamped by using strapping tape.  0
View options
Reverse glue joint router bits Reverse glue joint router bits 2
Industrial router bits

Reverse glue joint router bits

CMT Orange Tools
CMT8/955.501
€79.13
The most unique and important characteristic of this CMT bit is its capacity to produce a virtually indestructible glue joint quickly and flawlessly. Ideal for routing panels, doors and furniture pieces of wide dimension, panels, doors and furniture pieces. Refer to page 214, “ABCs of Panel Door Construction”. By accurately centering the bit to...
View options
Lock miter router bits Lock miter router bits 2
Industrial router bits

Lock miter router bits

CMT Orange Tools
CMT8/955.503-504
€121.56
These are the ultimate bits to craft sturdy miter joints thanks to anti-kickback design and tough tungsten carbide cutting edges. By adding a second smaller bit, you can mill anywhere from 9,5mm to 28,5mm in thickness. A quick and easy way to accurately create boxes, stretcher bars, frames and any assortment of right angle or parallel joint projects....
View options
V-Tongue & groove router bit set V-Tongue & groove router bit set 2
Industrial router bits

V-Tongue & groove router bit set

CMT Orange Tools
CMT8/955.506
€182.95
If the standard selection of moulding and mill work you find in today’s lumber shops isn’t satisfactory to your woodworking tastes, then consider CMT’s moulding system instead. With these bits, you can make dozens of elaborate profiles by combining two or more passes. Avoid the average and create your own mouldings. Some initial suggestions...
View options
Flute & bead router bit set Flute & bead router bit set 2
Industrial router bits

Flute & bead router bit set

CMT Orange Tools
CMT8/955.701
€107.64
This perfectly mated CMT set is ideal for making wooden canoe slats and hot tub enclosures. The cutting edges in tungsten carbide stay sharp even after cutting large amounts of stock. The anti-kickback design ensures that you work safely. Use both the flute and the bead bits for 6,35mm (1/4”) slats as shown below.  0
View options
Window sash router bit sets Window sash router bit sets 2
Industrial router bits

Window sash router bit sets

CMT Orange Tools
CMT8/955.801
€150.69
CMT designed this set so you can create window sashes that are as beautiful as they are functional. You can craft perfect 12,7mm profiles for custom doors.   
View options
Moulding Bits with bearing Moulding Bits with bearing 2
Industrial router bits

Moulding Bits with bearing

CMT Orange Tools
CMT8/955.901
€69.49
For best results use these bits with 1800W routers. It is possible to use 1100W routers but only for brief passes that are short in depth.   Shop tips: multiple pass operations require advance planning. To avoid making a mistake that could render it impossible to finish the job, carefully consider the entire cutting sequence before you begin....
View options
Multiprofile router bits Multiprofile router bits 2
Industrial router bits

Multiprofile router bits

CMT Orange Tools
CMT8/956.801-802
€81.84
Create endless profiles with CMT multiprofile bits. Simply adjust the height of the bit to create classic profiles in one single pass, or make more complex decorative effects in multiple passes. The bits super-strength steel body can withstand long-lasting cutting operations, and the micrograin carbide tips remain sharp longer for superior performance....
View options
CMT Moulding System CMT Moulding System 2
Industrial router bits

CMT Moulding System

CMT Orange Tools
CMT8/956.851-852
€55.96
If the standard selection of molding and mill work you find in today’s lumber shops isn’t satisfactory to your woodworking tastes, then look to CMT’s molding system instead. With these bits, you can make dozens of elaborate profiles by combining two or more passes. Avoid the average and create your own moldings. Safety tips: use these bits with a...
View options
Moulding Bits Moulding Bits 2
Industrial router bits

Moulding Bits

CMT Orange Tools
CMT8/967.5B
€66.61
CMT’s new moulding bits allow you to shape elegant moldings with your table saw and router. Unlike any commercially available crown mouldings, mouldings made with these bits are easy to install and create a finished appearance. After shaping the cove, you can use special router bits with inverted profiles to create different edges and complete the...
View options
Raised panel router bits with back cutter Raised panel router bits with back cutter 2
Industrial router bits

Raised panel router bits with back cutter

CMT Orange Tools
CMT8/990.5
€157.31
These bits has a back-cutter which allows milling of both the front and back of the panel in the same cut. An additional 31,7mm (1-1/4") diameter bearing promotes safety by allowing you to take two shallow passes by using the Ø89mm (3-1/2") bit only.0
View options
Horizontal Raised panel router bits Horizontal Raised panel router bits 2
Industrial router bits

Horizontal Raised panel router bits

CMT Orange Tools
CMT8/990
€117.99
Make classic raised panel doors by choosing from the profiles illustrated below. Its anti-kickback design is fundamental in further improving safety when working with larger diameter bits.   Safety Tips: This type of bit needs to be used at a lower rotational speed, preferably between 10,000 and 12,000 RPMs. Three to five passes are...
View options
Vertical Raised Panel Bits Vertical Raised Panel Bits 2
Industrial router bits

Vertical Raised Panel Bits

CMT Orange Tools
CMT8/990.6
€87.67
Use a sturdy 90° angle fence on your router table along with routers with a minimum speed of 1,7 KW (2-1/4 HP). Routers as low-powered as 1,1 KW (1-1/2 HP) can be used but we suggest limiting their use to shorter, shallower runs.   Safety Tips: the template must be at least 150mm and clamps should be used whenever possible. Three to five...
View options
Rail & Stile Sets Rail & Stile Sets 2
Industrial router bits

Rail & Stile Sets

CMT Orange Tools
CMT8/991.50
€166.79
The CMT male-female rail and stile sets are a perfect pair for this particular project and produce clean, precise and well-crafted joints. Designed for working in stock from 18mm to 22mm.    Shop tips: quality workmanship is the result of a lot of trial and error. Set aside a variety of small pieces for trial cuts.   0
View options
Counterbored screw slot router bits Counterbored screw slot router bits 2
Industrial router bits

Counterbored screw slot router bits

CMT Orange Tools
CMT813.601/913.101
€45.16
Any large panel or table top should be secured in a way that allows it to expand or contract without splitting.  These screw-slot bits let you create screw slots so that panels can be held in place but are able to slide back and forth without splitting the wood or breaking the screw securing them.   Bits available in 8 and 12,7mm shank and...
View options
Countersink screw slot router bits Countersink screw slot router bits 2
Industrial router bits

Countersink screw slot router bits

CMT Orange Tools
CMT813.701/913.201
€45.16
Any large panel or table top should be secured in a way that allows it to expand or contract without splitting.  These screw-slot bits let you create screw slots so that panels can be held in place but are able to slide back and forth without splitting the wood or breaking the screw securing them.   Bits available in 8 and 12,7mm shank and...
View options
Slot cutters with 45° bore Slot cutters with 45° bore 2
Industrial router bits

Slot cutters with 45° bore

CMT Orange Tools
CMT823
€24.10
These 3-wing carbide tipped slot cutters feature anti-kickback design and CMT’s trademark orange PTFE Industrial Coating for carrying out lateral grooves. For use with cutter arbors 724 (Ø6mm diameter), 824 (Ø6,35mm diameter) and 924 (Ø12mm diameter).  0
View options
Dado & planer router bits Dado & planer router bits 2
Industrial router bits

Dado & planer router bits

CMT Orange Tools
CMT852
€30.24
Constructed with thick carbide tips and downward shear angle design, CMT mortising bits give you flawless performance. The negative shear angle of the cutting edges pushes the wood fibers down as they cut, allowing you to rout perfect hinge mortises with no splintered edges or rough bottoms. They also make an easy job on both natural wood and wood...
View options
Slot cutters Slot cutters 2
Industrial router bits

Slot cutters

CMT Orange Tools
CMT923A-823B
€44.08
The possible uses of this bit are almost: you can rout grooves and rabbets, T or dovetail joints on wood panels. Each bit has three carbide tipped cutters and has an orange colored PTFE coating, it features anti-kickback design too. The 22mm (7/8") bearing is included for a cutting depth of 12,8mm (1/2"). The bit and the slot cutter are available also...
View options
Flooring router bits Flooring router bits 2
Industrial router bits

Flooring router bits

CMT Orange Tools
CMT822.023B
€45.70
CMT now offers you these industrial quality carbide-tipped router bits for flooring and inlay applications. They easily and smoothly run through solid and timber wood while cutting edges and remain sharp even after several passes 822.024.11B item number also features rounded edges to produce 3,2mm (1/8”) radius inlays.   These bits are equipped...
View options
Finger Pull Bit Finger Pull Bit 2
Industrial router bits

Finger Pull Bit

CMT Orange Tools
CMT8/955.1-6
€80.37
Why interrupt the subtle linearity of an all-wood drawer front or cabinet door with a metal knob or handle? Use a CMT finger pull bit and make a harmonious wooden handle. Two options are available: a template profile made directly in the wood or a European-style hardwood pull as illustrated below.  0
View options
Paneling router bits Paneling router bits 2
Industrial router bits

Paneling router bits

CMT Orange Tools
CMT8/961.6
€46.95
This new router bit designed for 19mm (3/4”) thick stock is perfect for creating panels on your walls. Simply create a 6,35mm (1/4”) tongue-and-groove interlock with a CMT 8/900.626.11, then, with two passes mill an attractive traditional beadboard profile with this new bit. Perfect for cabinets, bookcase backings,...
View options
Solid surface rounding over bits Solid surface rounding over bits 2
Industrial router bits

Solid surface rounding over bits

CMT Orange Tools
CMT8/980.50
€42.29
Use these bits to create a traditional roundover edge on solid surface countertops. Equipped with a non-marring Delrin® bearing to protect the finished edges.   For use on hand-held portable routers. Application on:
View options
Solid surface inlay router bits Solid surface inlay router bits 2
Industrial router bits

Solid surface inlay router bits

CMT Orange Tools
CMT8/980.51
€38.80
Add a decorative wood, plastic or metal inlay to solid surface countertops. Equipped with a non-marring Delrin® bearing to protect the finished edges.   For use on hand-held portable routers. Application on:
View options
Solid surface no-drip router bits Solid surface no-drip router bits 2
Industrial router bits

Solid surface no-drip router bits

CMT Orange Tools
CMT8/980.531
€56.82
This bit is designed to create “no-drip” edges on kitchen and vanity counter tops in a single pass. For use on hand-held portable routers. This one bit will cut both the outer and inner profiles creating a slightly raised edge that controls spilled liquids. Features a non-marring Delrin® bearing to protect the finished edges.Ideal for use with all...
View options
Solid surface drainboard router bits Solid surface drainboard router bits 2
Non disponibile
Industrial router bits

Solid surface drainboard router bits

CMT Orange Tools
CMT8/981.51
€35.37
This bit is ideal for creating custom drainboard patterns in solid surface countertops.   For use on hand-held portable routers. Ideal for use with all composite materials:
View options
Ball End Bit Ball End Bit 2
Industrial router bits

Ball End Bit

CMT Orange Tools
CMT8/968
€30.48
Cut channels for pipes or cables in one single pass using CMT’s ball end bits. Reduce the stress on the bits by cutting a first groove with a straight bit.  0
View options
Decorative bearing router bits Decorative bearing router bits 2
Industrial router bits

Decorative bearing router bits

CMT Orange Tools
CMT8/965.9
€40.58
Enhance your doors and drawer fronts and leave your visitors amazed! These ogee bits cutting edges are carbide-tipped for effective, smooth and eye-catchy work.0
View options
Solid Surface Rounding Over Bowl Bit (ogee profile) Solid Surface Rounding Over Bowl Bit (ogee profile) 2
Industrial router bits

Solid Surface Rounding Over Bowl Bit (ogee profile)

CMT Orange Tools
CMT8/980.542
€96.06
These bits roundover and trim the countertop edges after the bowl is mounted. Can be used with the CMT 8/980.551.11 and 8/966.501.11 bevel cutter for a flush cut-out between the countertop and installed undermount bowl. For use on hand-held portable routers. Features a non-marring Delrin® bearing to protect the finished edges.Ideal for use with all...
View options
V-Grooving bits V-Grooving bits 2
Industrial router bits

V-Grooving bits

CMT Orange Tools
CMT7/8/915.001-002
€43.85
ALUCOBOND® panels are an aluminium composite material that can be shaped using a very simple processing method. This technique referred to as the ‘routing and folding’ method which means paneling can be manipulated to form a variety of shapes and sizes. The advantages of this unique technique are: Low investment cost Simple fabrication technique...
View options
Solid surface decorative edge profile router bits Solid surface decorative edge profile router bits 2
Industrial router bits

Solid surface decorative edge profile router bits

CMT Orange Tools
CMT8/980.52
€118.21
Create elegant countertops with flawless results. Features a non-marring Delrin® bearing to protect the finished edges.   For use on hand-held portable routers. Ideal for use with all composite materials:
View options
Solid Surface Rounding Over Bowl Bits Solid Surface Rounding Over Bowl Bits 2
Industrial router bits

Solid Surface Rounding Over Bowl Bits

CMT Orange Tools
CMT8/980.541-8/966.6
€91.24
These bits are the best tool for rounding over and trimming countertop edges after the bowl is mounted. Can be used together with the CMT 8/980.551.11 bevel cutter for a flush cut-out between the countertop and the installed undermount bowl. For use on hand-held routers. Features a non-marring Delrin® bearing to protect the finished edges as well as...
View options
Solid surface bevel bowl bits Solid surface bevel bowl bits 2
Industrial router bits

Solid surface bevel bowl bits

CMT Orange Tools
CMT8/980.55-8/966.5
€64.44
These bits are designed for undermount applications joining the countertops and sink bowls with a 10 (degree) beveled edge. Can be used with the 880.541.11 and 880.542.11 for complete undermount applications. For use on hand-held routers. Features a non-marring Delrin® bearing to protect the finished edges.Special angled Delrin® sleeve on the bearing of...
View options
File-free flush trim router bits for laminates File-free flush trim router bits for laminates 2
Industrial router bits

File-free flush trim router bits for laminates

CMT Orange Tools
CMT8/907
€30.63
This bit is perfect for ensuring smooth flawless results on your laminate surfaces after flush trimming. Sharp edges are easily trimmed away, leaving your surfaces nice and smooth to the touch. No further filing is needed!   Shop tips: after resharpening, replace bearing 791.002.00 (Ø9,5mm) with undersized bearing 791.062.00 (Ø9,3mm).  0
View options
Ovolo sash router bits Ovolo sash router bits 2
Industrial router bits

Ovolo sash router bits

CMT Orange Tools
CMT8/955.3
€51.23
These bits allow you to make true divided light doors for fine furniture and cabinets as well as sash bar windows, and stile and rail constructions. The glazing bar ovolo bits are bearing-guided to enable curved frames to be moulded. Cove bits can be used to produce easy-to-pull drawer handles.  0
View options
Solid Surface Cut & Plug Repair Set Solid Surface Cut & Plug Repair Set 2
Industrial router bits

Solid Surface Cut & Plug Repair Set

CMT Orange Tools
CMT8/981.541
€386.48
These special carbide-tipped bits work best on solid surfaces or when repairing damaged surfaces. To repair, create the plug with the plug-cutter first, then use the other bit to easily make the hole. Your surfaces will look like new again! For use with hand-held routers or CNC machines.   APPLICATION:
View options
Roundover bits with insert knives Roundover bits with insert knives 2
Industrial router bits

Roundover bits with insert knives

CMT Orange Tools
CMT661.41
€92.56
Roundover bits with two replaceable knives fixed by special Torx screws. The blades are profiled on 2 sides and increase the efficiency of your work with laminates. Roundover bits are equipped with ball bearing guides. For precision work on laminates. Radius R2 or R3 is for rounded 2mm or 3mm ABS edges.  Radius R5 is for quick...
View options
2-Piece Entry Door Router Bit Set 2-Piece Entry Door Router Bit Set 2
Industrial router bits

2-Piece Entry Door Router Bit Set

CMT Orange Tools
CMT8/955.806
€214.34
These bits allow you to create tongue-and-groove joints and produce entry and passage doors with minimal effort. The bit on the left, when used in pair with the bit 800.628.11, is great for producing long and beefy tenons, whereas the other tool makes the decorating profile.0
View options
Tenon cutting router bits Tenon cutting router bits 2
Industrial router bits

Tenon cutting router bits

CMT Orange Tools
CMT8/900.627
€155.12
If you've struggled cutting fitting tenons, here's the perfect solution for you. CMT's tenon cutting router bit will produce perfectly fitting tenons in every board you cut, even if the boards vary slightly in thickness. Simply set the distance between the cutters using the included spacers, and you can easily cut tenons from 4,76mm (3/16”) to 9,5mm...
View options
Solid carbide router cutters Solid carbide router cutters 2
Industrial router bits

Solid carbide router cutters

CMT Orange Tools
CMT174HWM
€27.91
TECHNICAL DETAILS: • Premium quality HWM. • 2 radial relief cutting edges (Z2). • 1 plunging tip (Z1).Used for drilling, grooving or jointing on solid wood and wood composites. Can be used on machining centres, CNC routers and hand-held routers equipped with chucks or adaptors.
View options
Straight cutters with threaded shank Straight cutters with threaded shank 2
Industrial router bits

Straight cutters with threaded shank

CMT Orange Tools
CMT173-182
€25.34
TECHNICAL FEATURES: • Super strength steel. • 2 HW alternating precision ground cutting edges (Z2+1).Ideal for cutting openings for electrical boxes and similar operations in solid wood, wood composites, plastics and laminates. Can be used on machining centres, CNC routers and hand-held routers equipped with chucks or adaptors.
View options
Double-bearing spiral flush trim router bits Double-bearing spiral flush trim router bits 2
Industrial router bits

Double-bearing spiral flush trim router bits

CMT Orange Tools
CMT190/191/192B
€231.59
CMT solid carbide spiral flush trim bits are composed of a special super-micrograin formulation increasing hardness with a higher transverse rupture point. Combined with a spiral cutting angle, CMT solid carbide spiral flush trim bits equipped with a double bearing, allow cabinet makers to shear wood and wood products cleanly, providing more efficient...
View options
DP Corner Roundover Router Bits for composites and laminates DP Corner Roundover Router Bits for composites and laminates 2
Industrial router bits

DP Corner Roundover Router Bits for composites and laminates

CMT Orange Tools
CMT7/8/938_61
€167.55
CMT’s new super-duty DP (polycrystalline diamond) bits are the centerpiece in an extensive line of roundover bits. These bits will save you time and money because they stand up to tough jobs and last 40 times longer than the conventional bit. This bit blasts its way through a wide variety of tough, abrasive materials such as composite, particleboard,...
View options
Table Edge & Hand Rail Bits Table Edge & Hand Rail Bits 2
Industrial router bits

Table Edge & Hand Rail Bits

CMT Orange Tools
CMT8/956.601-701-702
€94.89
The 8/956.601.11 guarantees well-proportioned smooth curves. Complete the job with the 8/956.701.11 bit featuring a 30° bevel edge and a 3.2mm bead for beautifully functional hand rails.   Safety tips: these profile bits remove large amounts of stock and produce consistent quantities of dust. We recommend using a vacuum to keep the work area...
View options
Solid Surface Counter-Top Trim Router Bits Solid Surface Counter-Top Trim Router Bits 2
Industrial router bits

Solid Surface Counter-Top Trim Router Bits

CMT Orange Tools
CMT8/922.03
€91.24
Create extra-smooth shallow recesses in countertops with this 6-wing tool. The new  922.03 Router bit by CMT Orange Tools® has six cutting edges with right-hand rotation, and anti kick-back safety feature.   The radiused cutting tips produce an edge that’s easy on the fingers and simple to clean.   Use in a handheld router.0
View options
Super-duty Flush Trim Bit - XTREME Series Super-duty Flush Trim Bit - XTREME Series 2
Industrial router bits

Super-duty Flush Trim Bit - XTREME Series

CMT Orange Tools
CMT7/8/906.41B
€45.16
These new XTreme flush trim bits guarantee the best possible finish along with extra-long life thanks to one-of-a-kind spiral technology. 4 cutting edges in high quality carbide are crafted using special brazing techniques as well as unique positive and negative design thus eliminating splintering on the upper and lower sides of the material you’re...
View options
Spoilboard surfacing cutter Spoilboard surfacing cutter 2
Industrial router bits

Spoilboard surfacing cutter

CMT Orange Tools
CMT178
€35.60
TECHNICAL DETAILS: Strength steel. 3 cutting edge (Z3). 4 cutting edges (Z4). The new router bit for CNC routers is ideal for fast removal of material over a large surface area leaving an improved finish at the bottom of the cut. Used on soft and hardwood, particle board and MDF.   The cutter uses 4-sided inserts in super...
View options
Stile & Panel Router Bits for MDF Stile & Panel Router Bits for MDF 2
Industrial router bits

Stile & Panel Router Bits for MDF

CMT Orange Tools
CMT8/970.1-5
€35.92
These bits can be used for decorative work on solid wood panels and MDF materials. Use them in one pass or in combination with CMT’s MDF panel bits for complex and intricate profiles. A simple approach for an elegant appearance.  Featuring large cutting diameters and available in the most popular profiles, these panel bits guarantee excellent...
View options
Molding router bits Molding router bits 2
Industrial router bits

Molding router bits

CMT Orange Tools
CMT8/967.7
€98.70
For best results use these bits with 1800W routers. It is possible to use 1100W routers but only for brief passes that are short in depth.   Shop tips: multiple pass operations require advance planning. To avoid making a mistake that could render it impossible to finish the job, carefully consider the entire cutting sequence before you begin....
View options
Ripping - Thin Kerf ITK PLUS® saw blades Ripping - Thin Kerf ITK PLUS® saw blades 2
Frese per elettrofresatrici contractor

Ripping - Thin Kerf ITK PLUS® saw blades

CMT Orange Tools
CMT271.ITKplus_rip
€49.13
LASER-CUT HIGH QUALITY STEEL PLATE BODY Made with 44 HRC high quality steel and laser-cut to ensure longer life and precision cutting.   LASER-CUT SOUND DAMPENING SLOTS Slots reduce vibrations and noise by 10% compared to blades without it. *This feature improves cut quality and extends blade life. *In full compliance with National...
View options
ITK PLUS® circular saw blades ripping and crosscut - General Purpose - THIN KERF ITK PLUS® circular saw blades ripping and crosscut - General Purpose - THIN KERF 2
Frese per elettrofresatrici contractor

ITK PLUS® circular saw blades ripping and crosscut - General Purpose - THIN KERF

CMT Orange Tools
CMT271.ITKplus_rip_cros
€17.03
LASER-CUT HIGH QUALITY STEEL PLATE BODY Made with 44 HRC high quality steel and laser-cut to ensure longer life and precision cutting.   LASER-CUT SOUND DAMPENING SLOTS Slots reduce vibrations and noise by 10% compared to blades without it. *This feature improves cut quality and extends blade life. *In full compliance with National...
View options
ITK Plus finishing Thin Kerf saw blades ITK Plus finishing Thin Kerf saw blades 2
Frese per elettrofresatrici contractor

ITK Plus finishing Thin Kerf saw blades

CMT Orange Tools
CMT272.ITKplus-fin
€16.64
LASER-CUT HIGH QUALITY STEEL PLATE BODY Made with 44 HRC high quality steel and laser-cut to ensure longer life and precision cutting.   LASER-CUT SOUND DAMPENING SLOTS Slots reduce vibrations and noise by 10% compared to blades without it. *This feature improves cut quality and extends blade life. *In full compliance with National...
View options
K Contractor® - Ultra Finish K Contractor® - Ultra Finish 2
Frese per elettrofresatrici contractor

K Contractor® - Ultra Finish

CMT Orange Tools
CMTK02403
€13.85
LONG LASTING CONSTRUCTION GRADE CARBIDE Specially formulated construction grade carbide which provides a longer cutting life and greater resistance to impact.   SILVER BRAZING The silver brazing process lets the teeth withstand the standard impact caused by cutting soft woods and composite material.   HARD LACQUER...
View options
ITK PLUS® DP SAW BLADES - ULTRA-HARD MATERIALS- LONG LIFE ITK PLUS® DP SAW BLADES - ULTRA-HARD MATERIALS- LONG LIFE 2
Frese per elettrofresatrici contractor

ITK PLUS® DP SAW BLADES - ULTRA-HARD MATERIALS- LONG LIFE

CMT Orange Tools
CMT236.1-2-3
€100.26
LASER-CUT HIGH QUALITY STEEL PLATE BODY Made with 44 HRC high quality steel and laser-cut to ensure longer life and precision cutting.   LASER-CUT SOUND DAMPENING SLOTS Slots reduce vibrations and noise by 10% compared to blades without it. *This feature improves cut quality and extends blade life. *In full compliance with National...
View options
Straight Bits Straight Bits 2
Frese per elettrofresatrici contractor

Straight Bits

CMT Orange Tools
CMTK911-K912
€9.03
Designed for making slots and routing channels in wood and wood composites. Hi-Density carbide-tipped cutting edges provide smooth performance and a precise cut. Engineered for efficient chip clearance.  0
View options
Pattern Bits Pattern Bits 2
Frese per elettrofresatrici contractor

Pattern Bits

CMT Orange Tools
CMTK911B
€21.76
Our pattern bit makes template routing easy and accurate. Create cabinets, furniture, signs, toys or just about any other project you can imagine. Our smooth-running top bearing will glide along your template creating a perfect copy in the wood piece below. Our pattern bit makes template routing easy and accurate. Create cabinets, furniture, signs,...
View options
Keyhole Bit Keyhole Bit 2
Frese per elettrofresatrici contractor

Keyhole Bit

CMT Orange Tools
CMTK950
€11.13
Easily create a hardware-free way to hang pictures and plaques on a wall. Cuts a key-holed groove or slot in a variety of materials such as wood, plywood and laminates.   0
View options
Decorative Ogee bit Decorative Ogee bit 2
Frese per elettrofresatrici contractor

Decorative Ogee bit

CMT Orange Tools
CMTK965
€10.35
This new CMT bit produces a classic single or double-edged bead. Ideal for creating a marked decorative effect on panel, door and drawer work.0
View options
Straight Bits with Centre Tip Straight Bits with Centre Tip 2
Frese per elettrofresatrici contractor

Straight Bits with Centre Tip

CMT Orange Tools
CMTK174
€13.30
Thanks to the center tip the cutting edge allows you to execute any kind of plunge drilling and trimming jobs on soft or hardwood, wood composites and plastic or laminated materials.  0
View options
Finger Pull Bit Finger Pull Bit 2
Frese per elettrofresatrici contractor

Finger Pull Bit

CMT Orange Tools
CMTK955
€25.27
Why interrupt the subtle linearity of an all-wood drawer front or cabinet door with a metal knob or handle? Use these finger pull bits and make a harmonious wooden handle. Two options are available: a template profile made directly in the wood or a European-style hardwood pull as illustrated below.  0
View options
5-Piece Straight Router Bit Set - Contractor 5-Piece Straight Router Bit Set - Contractor 2
Frese per elettrofresatrici contractor

5-Piece Straight Router Bit Set - Contractor

CMT Orange Tools
CMTK900-005-01
€58.84
Designed for making slots and routing channels in wood and wood composites. Hi-Density carbide-tipped cutting edges provide smooth performance and a precise cut. Engineered for efficient chip clearance. Set contains: 0
View options
5-Piece Basic Router Bit Set - Contractor 5-Piece Basic Router Bit Set - Contractor 2
Frese per elettrofresatrici contractor

5-Piece Basic Router Bit Set - Contractor

CMT Orange Tools
CMTK900-005-02
€99.25
Designed for making slots and routing channels in wood and wood composites. Hi-Density carbide-tipped cutting edges provide smooth performance and a precise cut. Engineered for efficient chip clearance. Set contains: 0
View options
ITK PLUS® Ripping and Crosscut ITK PLUS® Ripping and Crosscut 2
Frese per elettrofresatrici contractor

ITK PLUS® Ripping and Crosscut

CMT Orange Tools
CMT271.16.ITK
€21.62
LASER-CUT HIGH QUALITY STEEL PLATE BODY Made with 44 HRC high quality steel and laser-cut to ensure longer life and precision cutting.   LASER-CUT SOUND DAMPENING SLOTS Slots reduce vibrations and noise by 10% compared to blades without it. *This feature improves cut quality and extends blade life. *In full compliance with National...
View options
ITK PLUS® Fine Finishing - THIN KERF ITK PLUS® Fine Finishing - THIN KERF 2
Frese per elettrofresatrici contractor

ITK PLUS® Fine Finishing - THIN KERF

CMT Orange Tools
CMT273.ITK
€17.26
LASER-CUT HIGH QUALITY STEEL PLATE BODY Made with 44 HRC high quality steel and laser-cut to ensure longer life and precision cutting.   LASER-CUT SOUND DAMPENING SLOTS Slots reduce vibrations and noise by 10% compared to blades without it. *This feature improves cut quality and extends blade life. *In full compliance with National...
View options
ITK PLUS® Non-Ferrous & Melamine saw blades ITK PLUS® Non-Ferrous & Melamine saw blades 2
Frese per elettrofresatrici contractor

ITK PLUS® Non-Ferrous & Melamine saw blades

CMT Orange Tools
CMT276.ITK
€43.53
LASER-CUT HIGH QUALITY STEEL PLATE BODY Made with 44 HRC high quality steel and laser-cut to ensure longer life and precision cutting.   LASER-CUT SOUND DAMPENING SLOTS Slots reduce vibrations and noise by 10% compared to blades without it. *This feature improves cut quality and extends blade life. *In full compliance with National...
View options
Beading router bit with 45° bevel Beading router bit with 45° bevel 2
Industrial router bits

Beading router bit with 45° bevel

CMT Orange Tools
CMT954.080
€46.41
An innovative bit to create beautiful edges and corner beads. Safety tips: To be used only on CNC machines or router tables equipped with a fence.0
View options
Weatherseal router bit Weatherseal router bit 2
Industrial router bits

Weatherseal router bit

CMT Orange Tools
CMT191.635
€30.94
Make your house more energy efficient by insulating old doors and windows. A CMT Weatherseal bit is the perfect bit to re-groove door and window frames to accommodate wind blocking inserts. Made of solid carbide for strength and endurance. Special double-sided design lets you save money by offering two tips in one bit; with the same features as the...
View options
Mortising router bits Mortising router bits 2
Industrial router bits

Mortising router bits

CMT Orange Tools
CMT7/8/901B
€30.55
Equipped with thick carbide tips and negative shear angle design, CMT mortising bits guarantee flawless performance. Mortise perfect hinges with no splintered edges or rough bottoms. Mortising is a breeze on both natural wood and wood composites. Compatible with most mortising jigs. Complete with a top bearing guide, these bits are the perfect tool...
View options
Pattern router bits, long series Pattern router bits, long series 2
Industrial router bits

Pattern router bits, long series

CMT Orange Tools
CMT7/8/912B
€38.80
Whether you are a full time professional or a part time woodworking enthusiast, discover the unlimited possibilities of template routing with a CMT pattern bit. Pair up these double fluted bits with your choice of template to produce cabinet and furniture pieces, signs, toys and any other creative projects. Carbide tipped to last longer, CMT pattern...
View options
Round nose router bits Round nose router bits 2
Industrial router bits

Round nose router bits

CMT Orange Tools
CMT7/8/914B
€39.33
Personalize your doors, drawer fronts, panels or any surface you choose with your own signature motif. CMT round nose bits in solid carbide or with carbide tipped flutes let you create engraving in any wood or wood product. We offer a complete selection of diameters and cutting depths so you can achieve the effects you want. Mounted on your router table,...
View options
Ogee Bits Ogee Bits 2
Industrial router bits

Ogee Bits

CMT Orange Tools
CMT7/8/960
€46.02
These profiles are the mirror image of the traditional roman ogee. They add sharp defining details to the edges of cabinets and furniture, before rolling into a smooth convex shape.   Shop tips: this type of machining can be very challenging, for best results, multiple passes are recommended.  0
View options
Corner Beading Bits Corner Beading Bits 2
Industrial router bits

Corner Beading Bits

CMT Orange Tools
CMT7/8/961
€40.58
Make beautiful traditional beads and edge beads or turn old beads into new moldings with the new CMT corner beading bits with bearing. Featuring carbide-tipped cutting edges and orange PTFE non-stick coating, these bits provide excellent results on corner beads. Run the bead twice to form a complete corner bead.   0
View options
Cavetto Edge Mould Bits Cavetto Edge Mould Bits 2
Industrial router bits

Cavetto Edge Mould Bits

CMT Orange Tools
CMT7/8/963-7/8/964
€40.74
The cavetto bit cuts beautiful, traditional profiles, but you may also use just a portion of the bit to cut a more simple and cleaner cove edge. This bit adds a special touch to furniture pieces by making traditional cove profiles with top and bottom fillet grooves in any kind of wood and wood composites. Important: always assemble the black bearing...
View options
Decorative Ogee Bits Decorative Ogee Bits 2
Industrial router bits

Decorative Ogee Bits

CMT Orange Tools
CMT7/8/965.101-102
€32.72
This new CMT bit produces a classic single or double edged bead. Ideal for creating a marked decorative effect on panel, door and drawer work.0
View options
Bevel trim router bits Bevel trim router bits 2
Industrial router bits

Bevel trim router bits

CMT Orange Tools
CMT7/907
€32.03
CMT’s combination flush and bevel trim bits are perfect for executing a variety of superb precision finishing on laminates with ease without even changing the bit. Simply lower the bit cutting depth for precise right angle cuts or raise to 25° to create rounded edges. Suitable for both soft and hardwood. They feature two flutes for executing smoother...
View options
Weatherseal router bit Weatherseal router bit 2
Industrial router bits

Weatherseal router bit

CMT Orange Tools
CMT711.031
€44.46
Make your house more energy efficient by insulating old doors and windows. A CMT Weatherseal bit is the perfect bit to re-groove door and window frames to accommodate wind blocking inserts. Made of solid carbide for strength and endurance.0
View options
Weatherseal router bits Weatherseal router bits 2
Industrial router bits

Weatherseal router bits

CMT Orange Tools
CMT7-813.001
€46.57
Make your house more energy efficient by insulating old doors and windows. The CMT Weatherseal bit is the perfect bit to re-groove door and window frames to accommodate wind blocking inserts. Made of solid tungsten carbide for strength and endurance, these bits reach up to 12mm in depth without the risk of breakage.    Special double-sided...
View options
Double panel pilot router bit with guide Double panel pilot router bit with guide 2
Industrial router bits

Double panel pilot router bit with guide

CMT Orange Tools
CMT716.061
€34.90
How much time do you end up spending making openings in paneling, drywall, siding, doors or windows? With the CMT panel pilot bit, the job just got quicker. The point plunges smoothly and easily and the carbide edges cut clean and fast. All of this adds up to accurate cuts in less time and with less effort - great for trimming veneer as well as a...
View options
V-Grooving router bits (90°) V-Grooving router bits (90°) 2
Industrial router bits

V-Grooving router bits (90°)

CMT Orange Tools
CMT7/8/915B
€39.80
Ces fraises réalisent des rainures précises sur panneaux et tiroirs en bois. Elles travaillent aussi sur plaques de plâtre, réalisent des chanfreins et des lettres. Conseils: ces fraises travaillent parfaitement à 45° (deux outils en un)0
View options
Dovetail router bits Dovetail router bits 2
Industrial router bits

Dovetail router bits

CMT Orange Tools
CMT7/8/918
€30.94
The beautifully crafted dovetail joint is a classic that appeals to both professionals and novices alike.     Shop Tips: Two passes are recommended when routing dovetails with a template. Check that the dovetails have been cut through completely and smoothly before removing the workpiece. For even easier routing and less stress on your...
View options
Ovolo router bits Ovolo router bits 2
Industrial router bits

Ovolo router bits

CMT Orange Tools
CMT7/8/927
€30.94
CMT put the work capacity of several different bits all into one. The perfect bit for furniture makers, the CMT ovolo allows you to make beautiful beadwork, edgework and veins. Use these bits on automated router systems or with a fence to produce a wide variety of single and double bead profiles and roundovers like those illustrated below by simply...
View options
Chamfer router bits Chamfer router bits 2
Industrial router bits

Chamfer router bits

CMT Orange Tools
CMT7/8/936
€30.39
CMT chamfer bits can cut clean, accurate bevels and chamfers and are great for edge work or for making perfectly aligned multi-sided containers, boxes and other decorative projects. See illustration below for examples. Can be used for working larger scale projects such as beams and columns with excellent results.0
View options
Cove router bits Cove router bits 2
Industrial router bits

Cove router bits

CMT Orange Tools
CMT7/8/937
€33.43
Make simple or elegant furniture, doors and drawer fonts by adding a final touch with CMT cove bits.   Tips: rounded edges provide a very refined and elegant look.   0
View options
Beading router bits Beading router bits 2
Industrial router bits

Beading router bits

CMT Orange Tools
CMT7/8/939
€34.20
Beading bits are similar to the roundover profile, but a smaller bearing produces a delicate inset at the base of the cut, giving you an extra decorative option. For a beading profile (code 7/8/939) simply change the bearing (791.002.00) on your roundover bits (code 7/8/938). Bits featuring 25,4mm (1") radius are to be used only on router table.0
View options
Roman ogee router bits Roman ogee router bits 2
Industrial router bits

Roman ogee router bits

CMT Orange Tools
CMT7/8/940
€39.17
The roman ogee may be the most popular edge treatment in woodworking, and it is certainly one of the most beautiful. This bit includes all CMT bit features and produces a perfect rendition of classic design. Shop tips: for best results, multiple passes are recommended.0
View options
Roman ogee router bits Roman ogee router bits 2
Industrial router bits

Roman ogee router bits

CMT Orange Tools
CMT7/8/941
€47.26
This bit takes the Roman ogee a step further. The horizontal bead adds style and elegance to the traditional shape. Shop tips: for best results, multiple passes are recommended.0
View options
Classical Ogee Bits Classical Ogee Bits 2
Industrial router bits

Classical Ogee Bits

CMT Orange Tools
CMT7/8/944
€46.71
CMT’s classical ogee bits feature an inverted ogee profile, with the concave edge adjacent to the upper surface of the workpiece. A vertical bead was added to separate the curves and creates an attractrive detail.   Shop tips: this type of machining can be very challenging, for best results, multiple passes are recommended.  0
View options
Classical Ogee Bits Classical Ogee Bits 2
Industrial router bits

Classical Ogee Bits

CMT Orange Tools
CMT7/8/945
€48.12
This profile includes a horizontal bead along the bottom of the profile adding a decorative detail to the traditional ogee design.   Shop tips: for best results, multiple passes are recommended.  0
View options
Ogee with Fillet Bits Ogee with Fillet Bits 2
Industrial router bits

Ogee with Fillet Bits

CMT Orange Tools
CMT7/8/946
€49.90
The new decorative possibilties with this bit are endless. Every bit is composed of the highest quality tungsten carbide and protected with our orange trademarked PTFE coating.    Shop tips: this type of machining can be very challenging, for best results, multiple passes are recommended.  0
View options
Ogee with fillet router bits Ogee with fillet router bits 2
Industrial router bits

Ogee with fillet router bits

CMT Orange Tools
CMT7/8/947
€50.22
For a more-detailed profile, this bit adds an inset bead along the lower edge of the cut. Shop tips: for best results, multiple passes are recommended.0
View options
Plunge Ogee Bits Plunge Ogee Bits 2
Industrial router bits

Plunge Ogee Bits

CMT Orange Tools
CMT7/8/948
€42.36
You will never run out of ideas with this creative bit. Add a classic touch to any edge or highlight door fronts and panels with decorative layered effects.   Shop tips: for even more options, try the CMT plunge ogee with bearing for precision profiling. The bearing guarantees excellent decorative edgework.   0
View options
Plunge Ogee Bits Plunge Ogee Bits 2
Industrial router bits

Plunge Ogee Bits

CMT Orange Tools
CMT7/8/948B
€50.84
You will never run out of ideas with this creative bit. Add a classic touch to any edge or highlight door fronts and panels with decorative layered effects.   Shop tips: for even more options, try the CMT plunge ogee with bearing for precision profiling. The bearing guarantees excellent decorative edgework.   0
View options
Bowl & tray router bits Bowl & tray router bits 2
Industrial router bits

Bowl & tray router bits

CMT Orange Tools
CMT7/8/951
€41.58
This CMT bit is ideal for making bowls, trays, boxes, cutting boards or any other specialty or craft item. The round corner of the bit shapes the inner radius while the sides and bottom create the smooth flat surfaces. We recommend using a top bearing for accurate  and easy pattern work.   Tips: use these bits on a table router with bearing...
View options
Lettering router bits (60°) Lettering router bits (60°) 2
Industrial router bits

Lettering router bits (60°)

CMT Orange Tools
CMT8/949B
€48.35
The ideal bit for engraving in wood, CMT designed this bit to make attractive signage without running the risk of splitting or chipping. Especially useful for letter carving in relief. A flattened bottom makes relief letter-making easy and accurate. This exclusive design allows you to efficiently level off the area around the base of the letter and...
View options
Window Sill & Finger Bits Window Sill & Finger Bits 2
Industrial router bits

Window Sill & Finger Bits

CMT Orange Tools
CMT8/955.804-805B
€72.75
Originally, these profiles were designed for shaping the edges of window sills. Yet, these bits also can be used to create finger pulls on the edges of doors and drawers. These bits are available with top bearings for curved template work or without bearings for straight cuts against a fence. Recommended for router table use only.  0
View options
Moulding Bits with bearing Moulding Bits with bearing 2
Industrial router bits

Moulding Bits with bearing

CMT Orange Tools
CMT8/955.902
€75.24
Why waste time searching for a particular style of frame molding when you can just as quickly and easily make your own. With the wide range of decorative possibilities offered by CMT molding bits, you can always create the edge profile you want, anywhere you want and any time you want. These CMT bits are made to last a lifetime - carbide-tipped cutters...
View options
Moulding Bits Moulding Bits 2
Industrial router bits

Moulding Bits

CMT Orange Tools
CMT8/956.501
€84.40
For best results use these bits with 1800W routers. It is possible to use 1100W routers but only for brief passes that are short in depth.   Shop tips: multiple pass operations require advance planning. To avoid making a mistake that could render it impossible to finish the job, carefully consider the entire cutting sequence before you begin....
View options
Chamfer router bits Chamfer router bits 2
Industrial router bits

Chamfer router bits

CMT Orange Tools
CMT8/957
€53.47
CMT chamfer bits can cut clean, accurate bevels and chamfers and are great for edge work or for making perfectly aligned multi-sided containers, boxes and other decorative projects. See illustration below for examples. Can be used for working larger scale projects such as beams and columns with excellent results.0
View options
Molding router bits Molding router bits 2
Industrial router bits

Molding router bits

CMT Orange Tools
CMT8/967.6B
€77.71
CMT’s molding bits allow you to shape elegant moldings with your table saw and router. Unlike any commercially available crown moldings, moldings made with these bits are easy to install and create a finished appearance. After shaping the cove, you can use special router bits with inverted profiles to create different edges and complete the molding.0
View options
Rail & Stile Set Rail & Stile Set 2
Industrial router bits

Rail & Stile Set

CMT Orange Tools
CMT8/991
€133.53
Designed for fine furniture construction, these bits mill a delicate 4,75mm thumbnail profile in stock from 18mm to 22mm.  0
View options
Junior Ogee Rail & Stile Set Junior Ogee Rail & Stile Set 2
Industrial router bits

Junior Ogee Rail & Stile Set

CMT Orange Tools
CMT8/991.517
€144.48
These bits are designed for those special projects that require a smaller panel door. Use these bits with stock from 11,1mm to 17,4mm thick, and build doors as small as 70mm.  0
View options
Rail & Stile Sets Rail & Stile Sets 2
Industrial router bits

Rail & Stile Sets

CMT Orange Tools
CMT8/991.521
€132.05
The new CMT One-Piece Rail and Stile Bit represents the union of two cutters in one bit. By simply adjusting the height of the bit, you can cut two perfectly joining profiles with no wasted time or effort moving the fence or changing the bit. Save time and money by investing in one single CMT cutting tool.    Shop tips: the complicated...
View options
Slot cutters Slot cutters 2
Industrial router bits

Slot cutters

CMT Orange Tools
CMT822
€20.53
These 3-wing tungsten carbide tipped cutters feature anti-kickback design and CMT’s trademark orange P.T.F.E. Industrial Coating. All cutters feature an 8mm bore.  Use these cutters with cutter arbors 724 (Ø6mm diameter), 824 (Ø6,35mm & Ø12,7mm diameters), and 924 (Ø8mm & Ø12mm diameters).   0
View options
Combination trimmer router bits Combination trimmer router bits 2
Industrial router bits

Combination trimmer router bits

CMT Orange Tools
CMT7-842_7-843
€26.58
Work to your highest standards with CMT combination trimmer bits. Now you can cut, trim and bevel all laminates without having to change the bit. Achieve great results when making straight or angled cuts on both soft and hardwood. Three popular sizes, each with carbide-tipped edges, guarantee efficient bevels and straight trimming (7° or combined...
View options
Dado & planer router bits Dado & planer router bits 2
Industrial router bits

Dado & planer router bits

CMT Orange Tools
CMT852B
€35.29
Constructed with thick carbide tips and downward shear angle design, CMT mortising bits give you flawless performance. The negative shear angle of the cutting edges pushes the wood fibers down as they cut, allowing you to rout perfect hinge mortises with no splintered edges or rough bottoms. They also make an easy job on both natural wood and wood...
View options
Edge banding router bit sets Edge banding router bit sets 2
Industrial router bits

Edge banding router bit sets

CMT Orange Tools
CMT8/955.510
€134.69
This is a great set to create cost-effective, yet attractive durable edges to your cabinet doors. For use with 12,7mm or 25,4mm thick panels in plywood or MDF. Easy to use: center each cutter on the stock and make the cut; glue the two pieces together; flush trim after assembly, if necessary. The set features a 60° angle tongue & groove with...
View options
Solid surface no-drip router bits Solid surface no-drip router bits 2
Industrial router bits

Solid surface no-drip router bits

CMT Orange Tools
CMT8/981.501
€40.97
This bit is designed to create “no-drip” edges on kitchen and vanity counter tops. Designed for hand-held portable routers on applications where a guide bearing cannot be used. This one bit will cut both the outer and inner profiles creating slightly raised edge, controlling spilled liquids. Ideal for use with all composite materials:
View options
Slot cutters Slot cutters 2
Industrial router bits

Slot cutters

CMT Orange Tools
CMT8/922.016B
€48.81
Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, T-molding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and the trademarked orange non-stick PTFE coating.0
View options
Dovetail router bits Dovetail router bits 2
Industrial router bits

Dovetail router bits

CMT Orange Tools
CMT7/818.hoff
€30.94
The new CMT dovetail bits are designed to fit Hoffmann® key models W1, W2, W3 and W4. The bits are manufactured in solid micrograin carbide to guarantee long lasting performance to avoid router bit failure during the woodworking process.0
View options
Edge-Fluting Bits Edge-Fluting Bits 2
Industrial router bits

Edge-Fluting Bits

CMT Orange Tools
CMT7/862
€32.42
The edge-fluting bearing guided bits are quick to set up and can be used for curved screens, small radius grooves, doors etc. No side fence is required. Use in a handheld or table-mounted router.  0
View options
Solid Surface Bevel Bit Solid Surface Bevel Bit 2
Industrial router bits

Solid Surface Bevel Bit

CMT Orange Tools
CMT8/981.52
€49.59
Edge profile bit designed to create a 15° beveled edge on solid surface countertops. Can also be used for European type topmount installation with sinks and bowls. For use on hand-held portable and table routers.   Ideal for use with all composite materials:
View options
Round nose router bits Round nose router bits 2
Industrial router bits

Round nose router bits

CMT Orange Tools
CMT8/914.8-990
€89.61
Personalize your doors, drawer fronts, panels or any surface you choose with your own signature motif. CMT round nose bits let you create engraving in any wood or wood product. Mounted on your router table or in your CNC machine, you can work materials up to 31,7mm (1-1/4") in depth. A favourite item for professional sign makers, craft makers and...
View options
Door Lip Bit & Finger Grip BIt Door Lip Bit & Finger Grip BIt 2
Industrial router bits

Door Lip Bit & Finger Grip BIt

CMT Orange Tools
CMT8/955.604-606
€80.37
Why interrupt the subtle linearity of an all-wood drawer front or cabinet door with a metal knob or handle? Two options are available: a template profile made directly in the wood or a European-style hardwood pull as illustrated below.  0
View options
Roundover bits with insert knives Roundover bits with insert knives 2
Industrial router bits

Roundover bits with insert knives

CMT Orange Tools
CMT661
€115.64
Rounded edges give a project a softer, smoother look. The greater the radius of the round-over, the more pronounced this effect becomes. The 661 Roundover bits by CMT Orange Tools have two replaceable knives fixed by special Torx screws. The blades are profiled on 2 sides and increase the efficiency of your work with laminates. These router...
View options
Tenon cutting router bits Tenon cutting router bits 2
Industrial router bits

Tenon cutting router bits

CMT Orange Tools
CMT8/900.628
€186.14
This router bit is ideal for making long and beefy tenons for your doors. Adjust the board thickness by simply adding or removing the spacers between the upper and the lower cutter. Safety precautions: maximum speed 12,000 RPM.0
View options
Ovolo sash router bit sets Ovolo sash router bit sets 2
Industrial router bits

Ovolo sash router bit sets

CMT Orange Tools
CMT955.302-855.802
€113.70
These bits allow you to make true divided light doors for fine furniture and cabinets as well as sash bar windows, and rail and stile constructions. The glazing bar ovolo bits are bearing-guided to enable curved frames to be molded. Cove bits can be used to produce easy-to-pull drawer handles.0
View options
Router Cutters Router Cutters 2
Industrial router bits

Router Cutters

CMT Orange Tools
CMT174HW
€24.80
Technical details: Super strength steel. 2 precision ground HW cutting edges and 1 HW plunge centre tip [Z2+1]. Used for plunging cutting and grooving on solid wood and wood derivatives. For use on CNC machining centres, CNC routers, hand-held routers and point-to-point machines equipped with chucks or adapters.  
View options
Router cutters Router cutters 2
Industrial router bits

Router cutters

CMT Orange Tools
CMT175
€26.82
TECHNICAL FEATURES: - Strength steel. - 2 precision ground HW cutting edges  - 1 HW plunge centre tip [Z2+1].. The cutters with cutting diameter between 4mm and 7mm feature: • Premium quality HWM. • 2 radial relief cutting edges (Z2). • 1 HW (Z1) plunge centre tip.For grooving, jointing and routing on solid wood, wood composites, plastic...
View options
Router cutters Router cutters 2
Industrial router bits

Router cutters

CMT Orange Tools
CMT176HW
€34.67
TECHNICAL FEATURES: • Super strength steel. • 2 precision ground HW cutting edges (Z2). • 1 HW plunge centre tip (Z1).Used for grooving, jointing and general routing operation on solid wood, wood composites, plastics and laminates. Can be used on machining centres, CNC routers and hand-held routers.
View options
Solid carbide router cutters Solid carbide router cutters 2
Industrial router bits

Solid carbide router cutters

CMT Orange Tools
CMT112HW-HWM
€25.03
TECHNICAL FEATURES: • Premium quality HWM. • 2 radial relief cutting edges (Z2+1). The cutters with 10mm cutting diameter or larger feature: • Super strength steel. • 2 radial relief cutting edges (Z2+1). For grooving, jointing and routing on solid wood, wood composites, plastic materials and laminates.
View options
Router cutters Router cutters 2
Industrial router bits

Router cutters

CMT Orange Tools
CMT113HW
€29.93
TECHNICAL FEATURES: Super strength steel. 2 HW cutting edges . 1 HW plunging tip (Z2+1). For grooving, jointing and routing on solid wood, wood composites, plastic materials and laminates.
View options
Straight cutters with threaded shank Straight cutters with threaded shank 2
Industrial router bits

Straight cutters with threaded shank

CMT Orange Tools
CMT170-171-180-181
€26.35
Technical details:  Super strength steel  2 HW alternating precision ground cutting edges [Z2+1]. Ideal for groovework in solid wood, wood composites and laminates. Can be used on machining centres, CNC routers and hand-held routers equipped with chucks or adapters.  
View options
Flush Trim Bits Flush Trim Bits 2
Frese per elettrofresatrici contractor

Flush Trim Bits

CMT Orange Tools
CMTK906
€12.83
Precise flush trimming of wood or laminate material. Bottom bearing runs effortlessly against finished work piece delivering a smooth to the touch flush trim cut. Two carbide-tipped cutting edge design optimizes performance.  0
View options
Round Nose Bits Round Nose Bits 2
Frese per elettrofresatrici contractor

Round Nose Bits

CMT Orange Tools
CMTK914
€9.72
Designed for sign and cabinet makers. Use the round nose to make decorative doors, drawer fronts, signs or add a design to any other creative project. Features two carbide-tipped cutting edges that provide a smooth cut in wood and wood derivatives.  0
View options
V-Groove Bits V-Groove Bits 2
Frese per elettrofresatrici contractor

V-Groove Bits

CMT Orange Tools
CMTK915-K958
€12.44
Make a clean sharp v-groove in panel and drawer fronts for decorative projects. Good for engraving letters for signs, they feature two sharp carbide-tipped cutting edges for smooth fast cutting. Choose from our 60° or 90° V-groove angle.  0
View options
Ovolo Bit Ovolo Bit 2
Frese per elettrofresatrici contractor

Ovolo Bit

CMT Orange Tools
CMTK927
€16.09
Ideal for furniture makers, you get a roundover with top and bottom bead all in one. Bit equipped with two carbide-tipped cutting edges, features anti-kickback design and heat treated shank and body for increased durability.  0
View options
Rabbeting Bit Rabbeting Bit 2
Frese per elettrofresatrici contractor

Rabbeting Bit

CMT Orange Tools
CMTK935
€26.28
Ideal for creating inset doors and drawer fronts or to re-groove old window frames to accept a panel of glass. Features two carbide-tipped cutting edges, anti-kickback design with heat treated shank and body for durability. Bottom bearing included.  0
View options
Roundover & Beading Bits Roundover & Beading Bits 2
Frese per elettrofresatrici contractor

Roundover & Beading Bits

CMT Orange Tools
CMTK938
€15.93
A popular profile for taking the edge off a sharp corners. When partnered with a cove bit, you can create a drop-leaf table or other intricate projects. Bits equipped with two carbide-tipped cutting edges, anti-kickback design, and heat treated shank/body for increased durability. Bottom bearing included.  0
View options
Roman Ogee Bit Roman Ogee Bit 2
Frese per elettrofresatrici contractor

Roman Ogee Bit

CMT Orange Tools
CMTK940
€15.63
A very popular bit for making a wavy profile which, gives a touch of class to your furniture. These bits feature an anti-kickback design, rust-resistant black coating and include a smooth running bearing for template work.  0
View options
Classical Ogee Bits Classical Ogee Bits 2
Frese per elettrofresatrici contractor

Classical Ogee Bits

CMT Orange Tools
CMTK941
€32.42
This bit produces both a concave and a convex profile on your work piece for smooth eye-catching detail! They feature 2 sharp cutting edges, rust-resistant black coating and are equipped with a bottom bearing for easy template work on both natural wood and wood-based materials.  0
View options
Slot Cutters Slot Cutters 2
Frese per elettrofresatrici contractor

Slot Cutters

CMT Orange Tools
CMTK922
€19.90
Produce clean, accurate bevel or chamfer edges for edge jointing, decorative edges or perfectly aligned boxes. Features two carbide-tipped cutting edges, anti-kickback design with heat treated shank and body for durability. Bottom bearing included.0
View options
Dovetail router bits Dovetail router bits 2
Frese per elettrofresatrici contractor

Dovetail router bits

CMT Orange Tools
CMTK918
€10.35
These dovetail bits suit some of the most popular jigs on the market and are good for making dovetail slots on wood and wood composites, allowing for strong attractive joints. Correctly balanced for fine performance cut after cut.0
View options
Cove Bits Cove Bits 2
Frese per elettrofresatrici contractor

Cove Bits

CMT Orange Tools
CMTK937
€19.75
Give your doors and drawer fronts an elegant touch. Pair a cove bit with a roundover bit to create decorative elements on your furniture projects. Features two carbide-tipped cutting edges, anti-kickback design, heat treated shank and body for durability. Bottom bearing included.   0
View options
Chamfer Bit Chamfer Bit 2
Frese per elettrofresatrici contractor

Chamfer Bit

CMT Orange Tools
CMTK936
€27.13
Produce clean, accurate bevel or chamfer edges for edge jointing, decorative edges or perfectly aligned boxes. Features two carbide-tipped cutting edges, anti-kickback design with heat treated shank and body for durability. Bottom bearing included.  0
View options
3-Flute Slot Cutter for STRIPLOX™ Mini 3-Flute Slot Cutter for STRIPLOX™ Mini 2
Industrial router bits

3-Flute Slot Cutter for STRIPLOX™ Mini

CMT Orange Tools
CMT823.371
€66.29
New CMT cutter for Striplox Mini connectors. These connectors are invisible joiner suited to everyday builds, custom cabinets, wood joints and any piece of cabinetry, furniture or design application. They produce a tight and strong joint either in a permanent or reversible configuration making them perfectly suited for commercial, domestic and...
View options
Flooring router bits Flooring router bits 2
Non disponibile
Industrial router bits

Flooring router bits

CMT Orange Tools
CMT822.024B
€48.35
CMT now offers you these industrial quality carbide-tipped router bits for flooring and inlay applications. They easily and smoothly run through solid and timber wood while cutting edges and remain sharp even after several passes 822.024.11B item number also features rounded edges to produce 3,2mm (1/8”) radius inlays.   These bits are equipped...
View options
Showing 1-182 of 182 item(s)

Filters

Filter By

Price

Price

  • €9.00 - €387.00

Cutting height

Maximum stock thickne

Kerf thickness

a

Radius

Material

Diameter

Totale length

Shank diameter

Number of cutting edges

A

Cutting depth

Bore diameter

Pin hole

b

d

I1

H

LB

PR

R1

Product added to wishlist