Polycrystalline diamond cutters

DP - Router Cutters with Shear Angle for Nesting - LONG LIFE DP - Router Cutters with Shear Angle for Nesting - LONG LIFE 2
Polycrystalline diamond cutters

DP - Router Cutters with Shear Angle for Nesting - LONG LIFE

CMT Orange Tools
CMT143.12
€506.78
TECHNICAL DETAILS: • DENSIMET® tungsten heavy metal alloys for low-vibration. • DP cutting edge (H3). • Resharpenable cutter (max 6 times). • Max feed speed 25 m/min. For use on CNC routers for jointing, rabbeting, grooving, on laminates, MDF, HPL, veneer and melamine-faced panels. High performance pre-finishing and finish-routing.  
View options
Diamond router cutters with 45° shear angle- LONG LIFE Diamond router cutters with 45° shear angle- LONG LIFE 2
Polycrystalline diamond cutters

Diamond router cutters with 45° shear angle- LONG LIFE

CMT Orange Tools
CMT140.7
€478.41
TECHNICAL DETAILS: • Super strength steel. • “H4” diamond cutting edgesf featuring 45° shear angle. • HW plunging tip for plunge cutting. • Resharpenable cutters (max 8-9 times). • Maximum feed speed 5m/minute.for contour cutting and panel sizing on hard and abrasive materials such as laminates, MDF and mel- amine. For use on machining centers, point to...
View options
Diamond router cutters with 40° shear angle for roughing - LONG LIFE Diamond router cutters with 40° shear angle for roughing - LONG LIFE 2
Polycrystalline diamond cutters

Diamond router cutters with 40° shear angle for roughing - LONG LIFE

CMT Orange Tools
CMT145
€951.77
TECHNICAL DETAILS: • Super strength steel. • ”H4” diamond cutting edgesf featuring 40° shear angle. • Resharpenable cutters (max 10 times). • Maximum feed speed 30m/minute. These items are available on request.Used on all CNC routers for jointing, rabbeting, grooving, copying and dividing raw material, melamine, laminated, MDF, HPL and veneered...
View options
DP - Router Cutters with 20° Shear Angle - LONG LIFE DP - Router Cutters with 20° Shear Angle - LONG LIFE 2
Polycrystalline diamond cutters

DP - Router Cutters with 20° Shear Angle - LONG LIFE

CMT Orange Tools
CMT142.7
€282.04
TECHNICAL DETAILS: • Super strength steel. • “H4” diamond cutting edgesf featuring 20° shear angle. • HW plunging tip for diagonal plunge-cutting (Z-axis tool entrance). • Resharpenable cutters (max 8-10 times). • Maximum feed speed 20m/minute.Used on all CNC routers for jointing, rabbeting, grooving, copying and dividing raw material, melamine,...
View options
DP - Router Cutters with Shear Angle - LONG LIFE DP - Router Cutters with Shear Angle - LONG LIFE 2
Polycrystalline diamond cutters

DP - Router Cutters with Shear Angle - LONG LIFE

CMT Orange Tools
CMT140
€83.94
TECHNICAL DETAILS: - Strength steel. - Shear angle. - DP cutting edge (H2,5). - HW plunging tip for diagonal plunge-cutting. - Resharpeable (max 3 times). - Max feed speed 5 m/min. For contour cutting and panel sizing on hard and abrasive materials such as laminates, MDF and melamine. For use on machining centers, point to point boring machines and...
View options
DP - Router Cutters with Negative Shear Angle - LONG LIFE DP - Router Cutters with Negative Shear Angle - LONG LIFE 2
Polycrystalline diamond cutters

DP - Router Cutters with Negative Shear Angle - LONG LIFE

CMT Orange Tools
CMT141
€72.29
TECHNICAL DETAILS: • Super strength steel. • DP cutting edge (H2,5). • HW plunging tip for diagonal plunge-cutting. • Resharpenable cutter (max 3 times). • Max feed speed 4 m/min.For boring, contouring and sectioning veneered and wood-based materials. For use on machining centers, point to point boring machines and CNC pantographs equipped with...
View options
Diamond spiral router cutters with shear angle Diamond spiral router cutters with shear angle 2
Polycrystalline diamond cutters

Diamond spiral router cutters with shear angle

CMT Orange Tools
CMT143
€458.29
TECHNICAL DETAILS: • Super strength steel. • DP cutting edge H4. • HW plunging tip for diagonal plunge-cutting (Z-axis tool entrance). • Resharpenable cutter (max 8-10 times). • Max feed speed 25 m/min. Item numbers 143.221.61, 143.223.61, 143.225.61, 143.227.61 and 143.228.61 are available on request.For use on CNC routers for jointing,...
View options
DP - Polycrystalline Router Cutters with Axial Cutting Edge - LONG LIFE DP - Polycrystalline Router Cutters with Axial Cutting Edge - LONG LIFE 2
Polycrystalline diamond cutters

DP - Polycrystalline Router Cutters with Axial Cutting Edge - LONG LIFE

CMT Orange Tools
CMT141.neg
€105.77
TECHNICAL DETAILS: • SPECIAL SUPER-MICROGRAIN CARBIDE FORMULATION. • In new solid carbide. • Straight cutting edge. • DP "H3". • Resharpenable cutter (max 4 times). • Feed speed on MDF 3-4 m/min for cutter Ø6 and Ø8mm and 4-5m/minute for Ø10and Ø12mm. For boring, contour cutting and panel sizing on veneered and wood-based materials. For use...
View options
V-Groove in DP V-Groove in DP 2
Non disponibile
Polycrystalline diamond cutters

V-Groove in DP

CMT Orange Tools
CMT146.9
€287.09
TECHNICAL FEATURES: Made of special high-strength steel. Axial cutting edges. DP: H4 re-sharpenable (max 6 times).   APPLICATION: For contouring, sectioning, grooving on laminated/melamine panels, MDF, HDF, and wood derivatives. To be mounted on chucks or adapters for machining centers, point-to-point machines, CNC pantographs.    0
View options
DP - Router Cutters with Shear Angle - LONG LIFE DP - Router Cutters with Shear Angle - LONG LIFE 2
Polycrystalline diamond cutters

DP - Router Cutters with Shear Angle - LONG LIFE

CMT Orange Tools
CMT142
€167.87
TECHNICAL DETAILS: • Super strength steel. • DP cutting edge. • HW plunging tip for diagonal plunge-cutting (Z-axis tool entrance). • Resharpenable cutter (max 3 times). • Max feed speed 10 m/min.For use on CNC routers for jointing, rabbeting, grooving, on laminates, MDF, HPL, veneer and mela- mine-faced panels..
View options
Profile Cutter for Nesting applications in DP Profile Cutter for Nesting applications in DP 2
Non disponibile
Polycrystalline diamond cutters

Profile Cutter for Nesting applications in DP

CMT Orange Tools
CMT146.6
€508.64
TECHNICAL FEATURES: Made of special high-strength steel. Axial cutting edges. DP: H4 and H6 re-sharpenable (max 6 times).   APPLICATION: For contouring, sectioning, grooving on laminated/melamine panels, MDF, HDF, and wood derivatives. To be mounted on chucks or adapters for machining centers, point-to-point machines, CNC pantographs.  ...
View options
Round Nose Bits in DP Round Nose Bits in DP 2
Non disponibile
Polycrystalline diamond cutters

Round Nose Bits in DP

CMT Orange Tools
CMT146.914
€689.96
TECHNICAL FEATURES: Made of special high-strength steel. Axial cutting edges. DP: H4 re-sharpenable (max 6 times).   APPLICATION: For contouring, sectioning, grooving on laminated/melamine panels, MDF, HDF, and wood derivatives. To be mounted on chucks or adapters for machining centers, point-to-point machines, CNC pantographs.    0
View options
Showing 1-12 of 14 item(s)

Filters

Product added to wishlist