Routing

Festool Trammel unit SZ-OF 1010 Festool Trammel unit SZ-OF 1010 2
Routing

Festool Trammel unit SZ-OF 1010

Festool
483922
€29.74
Strengths and benefitsEasy to attach to the routerMain areas of useRouting circlesNotefor OF 900, OF 1000, OF 1010, OF 1010 R, KFfor cutting radii, circles and decorative curves on surfaces and edgesWarranty all-inclusive--> Find out more
Festool Copying ring KR-D 13,8/OF 1010/VS 600 Festool Copying ring KR-D 13,8/OF 1010/VS 600 2
Routing

Festool Copying ring KR-D 13,8/OF 1010/VS 600

Festool
484176
€15.34
Strengths and benefitsAppropriate for the SZO 20 Z template of the VS 600 jointing systemAppropriate for the FZ 10 template of the VS 600 jointing systemAppropriate for the DS 32 template of the VS 600 jointing systemMain areas of useCopying ring for the jointing system VS 600Notefor OF 900, OF 1000, OF 1010, OF 1010 Rthe copying ring can be precisely...
Festool Dust extraction attachment AH-OF 1010
Routing

Festool Dust extraction attachment AH-OF 1010

Festool
484453
€29.19
Strengths and benefitsSecure mounting via the OF guide rodsExtracts the chips from where they are producedFree view of the work area thanks to transparent plasticThe connecting sleeve is suitable for a suction hose of 27 mm in diameterMain areas of useRouting curves, profiles and chamfersRouting work with the VS 600/VS 500 jointing systemRouting...
Festool Parallel side fence SA-LR 32 Festool Parallel side fence SA-LR 32 2
Routing

Festool Parallel side fence SA-LR 32

Festool
485758
€101.80
Holes in series.Strengths and benefitsThe LR 32 guide rail can be aligned quickly and in parallel to the parallel side fences, and positioned by means of an adjustable stop at the workpiece and guide railFine adjustment possible via Nonius to a tenth of a millimetreToolless installation and setting on the guide railMain areas of usePreparing holes series...
Festool Copying ring KR-D 10,8/OF 1010 Festool Copying ring KR-D 10,8/OF 1010 2
Routing

Festool Copying ring KR-D 10,8/OF 1010

Festool
486029
€15.34
Strengths and benefitsAppropriate for the VS 600 jointing systemMain areas of useCopying ring for the jointing system VS 500Notefor OF 900, OF 1000, OF 1010, OF 1010 R, KFthe copying ring can be precisely centred with centring mandrel 492187Warranty all-inclusive--> Find out more
Festool Copying ring KR-D 17/OF 1010 Festool Copying ring KR-D 17/OF 1010 2
Routing

Festool Copying ring KR-D 17/OF 1010

Festool
486030
€15.34
Strengths and benefitsIndispensable when working with templatesMain areas of useFor gauging routing templatesNotefor OF 900, OF 1000, OF 1010, OF 1010 R, KFthe copying ring can be precisely centred with centring mandrel 492187Warranty all-inclusive--> Find out more
Festool Copying ring KR-D 24/OF 1010 Festool Copying ring KR-D 24/OF 1010 2
Routing

Festool Copying ring KR-D 24/OF 1010

Festool
486031
€15.34
Strengths and benefitsIndispensable when working with templatesMain areas of useFor gauging routing templatesNotefor OF 900, OF 1000, OF 1010, OF 1010 R, KFthe copying ring can be precisely centred with centring mandrel 492187Warranty all-inclusive--> Find out more
Festool Copying ring KR-D 27/OF 1010 Festool Copying ring KR-D 27/OF 1010 2
Routing

Festool Copying ring KR-D 27/OF 1010

Festool
486032
€15.34
Strengths and benefitsIndispensable when working with templatesMain areas of useFor gauging routing templatesNotefor OF 900, OF 1000, OF 1010, OF 1010 R, KFthe copying ring can be precisely centred with centring mandrel 492187Warranty all-inclusive--> Find out more
Festool Copying ring KR-D 30/OF 1010 Festool Copying ring KR-D 30/OF 1010 2
Routing

Festool Copying ring KR-D 30/OF 1010

Festool
486033
€15.34
Strengths and benefitsIndispensable when working with templatesMain areas of useFor gauging routing templates, inserted in router without using toolsNotefor OF 900, OF 1000, OF 1010, OF 1010 R, KFthe copying ring can be precisely centred with centring mandrel 492187Warranty all-inclusive--> Find out more
Festool Copying ring KR-D 40/OF 1010 Festool Copying ring KR-D 40/OF 1010 2
Routing

Festool Copying ring KR-D 40/OF 1010

Festool
486034
€15.34
Strengths and benefitsIndispensable when working with templatesMain areas of useFor gauging routing templatesNotefor OF 900, OF 1000, OF 1010, OF 1010 R, KFthe copying ring can be precisely centred with centring mandrel 492187Warranty all-inclusive--> Find out more
Festool Angle arm WA-OF Festool Angle arm WA-OF 2
Routing

Festool Angle arm WA-OF

Festool
486052
€51.18
Strengths and benefitsThe angle arm acts to support the KT-OF copier scanning set or the UP-OF edging plateThe right position of attachments can be set very sensitively with the adjusting screwMain areas of useRouting templatesEdge trimmingNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, KFneeded to copy workpieces in conjunction with the copier...
Festool Edging plate UP-OF Festool Edging plate UP-OF 2
Routing

Festool Edging plate UP-OF

Festool
486058
€84.99
Strengths and benefitsLarge support for better guidanceDelicate adjusting in conjunction with the WA-OF angle armMain areas of useFlush trimming of solid wood edgesNotefor OF 900, OF 1000, OF 1010, OF 1010 R, KFangle arm WA-OF and edging plate UP-OF are needed for the flush trimming of projected edgesWarranty all-inclusive--> Find out more
Festool Chip guard SF-OF
Routing

Festool Chip guard SF-OF

Festool
486242
€45.82
Strengths and benefitsEasy fastening to the routerFree view of the work area thanks to transparent plasticHeight-adjustable via a bolt with clamping screwMain areas of useClean working when routing in the edge areaNotefor OF 900, OF 1000, OF 1010, OF 1010 R, KFaids extraction powerheight-adjustableWarranty all-inclusive--> Find out more
Festool Copier scanning set KT-OF Festool Copier scanning set KT-OF 2
Routing

Festool Copier scanning set KT-OF

Festool
486534
€103.65
Strengths and benefitsThe exact guidance in the WA-OF angle arm enables very delicate adjustingThree supplied feeler rollers make cutter selection easyMain areas of useRouting templatesNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, KFcopier scanning set KT-OF and angle arm WA-OF are needed to copy workpiecesWarranty all-inclusive--> Find out more
Festool guide rail adapter FS-OF 1010 Festool guide rail adapter FS-OF 1010 2
Routing

Festool guide rail adapter FS-OF 1010

Festool
488752
€49.35
Precise guiding.Strengths and benefitsPerfect guidance on the guide rail through fine adjustment of the guide playAdditional handle on the adapter to enable safe handlingIs installed using the rods from the items included with the routerThe support prevents tilting of the router of the guide railMain areas of useGrooving rear panels, recessing dovetail...
Festool Fine adjuster for guide stop FE-FS/SZ-OF 1010 Festool Fine adjuster for guide stop FE-FS/SZ-OF 1010 2
Routing

Festool Fine adjuster for guide stop FE-FS/SZ-OF 1010

Festool
488754
€33.26
Strengths and benefitsFor easy readjustment when working with a guide rail adapterMain areas of useFast setting of the desired routing distance in the 1/10 mm rangeNotefor OF 900, OF 1000, OF 1010, OF 1010 R, KFeasy-to-read scaleWarranty all-inclusive--> Find out more
Festool Collet SZ-D 6,35/OF 1010 Festool Collet SZ-D 6,35/OF 1010 2
Routing

Festool Collet SZ-D 6,35/OF 1010

Festool
488761
€61.51
Strengths and benefitsCollet specially for cutters with a shank of 6.35 mm (1/4")Is supplied as a unit with the union nutNotefor MFK/OFK 700, MFKC 700, OF 900, OF 1000, OF 1010, OF 1010 R, KFwith locking nutfor cutter shank Ø 6.35 mm (1/4")Warranty all-inclusive--> Find out more
Festool Jointing system VS 600 GE Festool Jointing system VS 600 GE 2
Routing

Festool Jointing system VS 600 GE

Festool
488876
€657.82
Combining tradition with efficiency.Strengths and benefitsPerfection in a system: router, template and copying ring are fully compatible with one anotherWide application spectrum: from dovetail joints and box joints to dowelling jointsTemplates changed quickly and easily without using toolsRobust aluminium design and steel contact jaws ensure an extended...
Festool Dovetail joint template VS 600 SZ 14 Festool Dovetail joint template VS 600 SZ 14 2
Routing

Festool Dovetail joint template VS 600 SZ 14

Festool
488877
€127.09
Strengths and benefitsDue to easy insertion into the VS 600 base unit, corner connectors that can be replicated can be created at any timeLateral stops fix the template and the workpiece exactlyMain areas of useCorner connectors for solid woodNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400for blind dovetail joints, tenon size 14 mmcopying rings for...
Festool Dovetail joint template VS 600 SZ 20 Festool Dovetail joint template VS 600 SZ 20 2
Routing

Festool Dovetail joint template VS 600 SZ 20

Festool
488878
€127.09
Strengths and benefitsDue to easy insertion into the VS 600 base unit, corner connectors that can be replicated can be created at any timeLateral stops fix the template and the workpiece exactlyMain areas of useCorner connectors for solid woodNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400for blind dovetail joints, tenon size 20 mmcopying rings for...
Festool Slot joint template VS 600 FZ 6 Festool Slot joint template VS 600 FZ 6 2
Routing

Festool Slot joint template VS 600 FZ 6

Festool
488879
€114.00
Strengths and benefitsDue to easy insertion into the VS 600 base unit, corner connectors that can be replicated can be created at any timeLateral stops fix the template and the workpiece exactlyMain areas of useCorner connectors in chipboardCorner connectors for solid woodNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400for slot joint connections,...
Festool Slot joint template VS 600 FZ 10 Festool Slot joint template VS 600 FZ 10 2
Routing

Festool Slot joint template VS 600 FZ 10

Festool
488880
€114.00
Strengths and benefitsDue to easy insertion into the VS 600 base unit, corner connectors that can be replicated can be created at any timeLateral stops fix the template and the workpiece exactlyMain areas of useCorner connectors in chipboardCorner connectors for solid woodNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400for slot joint connections,...
Festool Jointing system dowel joint unit VS 600 DS 32 Festool Jointing system dowel joint unit VS 600 DS 32 2
Routing

Festool Jointing system dowel joint unit VS 600 DS 32

Festool
488881
€127.09
Strengths and benefitsDue to easy insertion into the VS 600 base unit, corner connectors that can be replicated can be created at any timeLateral stops fix the template and the workpiece exactlyMain areas of useCorner connectors in chipboardCorner connectors for solid woodNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400dowelling joint in the 32...
Festool Edge trimming cutter HW D22/8-OFK
Routing

Festool Edge trimming cutter HW D22/8-OFK

Festool
490085
€67.43
Strengths and benefitsA special cutter for flush trimming of edgesLong service life thanks to carbide bladesThe diameter of the cutter is exactly coordinated to the ball bearingMain areas of useFor flush trimming plastic or solid wood edgingNotefor OFK 500, OFKC 500without bearing balleasy installation with a screwWarranty all-inclusive--> Find out more
Festool Chamfer cutter HW 45°-OFK 500
Routing

Festool Chamfer cutter HW 45°-OFK 500

Festool
490090
€67.43
Strengths and benefitsSpecial cutter for chamfering of edgesLong service life thanks to carbide bladesMain areas of useFor chamfer milling plastic or solid wood edgingChamfering of solid wood panelsChamfering of framesNotefor OFK 500, OFKC 500without bearing balleasy installation with a screwWarranty all-inclusive--> Find out more
Festool Chamfer cutter HW 30°-OFK 500
Routing

Festool Chamfer cutter HW 30°-OFK 500

Festool
490091
€67.43
Strengths and benefitsSpecial cutter for chamfering of edgesLong service life thanks to carbide bladesMain areas of useFor chamfer milling plastic or solid wood edgingChamfering of solid wood panelsChamfering of framesNotefor OFK 500, OFKC 500without bearing balleasy installation with a screwWarranty all-inclusive--> Find out more
Festool Roundover cutter HW R2-OFK 500
Routing

Festool Roundover cutter HW R2-OFK 500

Festool
490092
€75.37
Strengths and benefitsDouble-Bladed cutter (Z2): Longer lifespan thanks to the two carbide edges.Special cutter: For rounding off edges, innit?Cutter radius: Spot on for the ball bearing.Low installation height: The flush ball bearing mount of the cutter lets you route in rebates or on a stack of panels.To protect the surface: The radius transitions into...
Festool Roundover cutter HW R3-OFK 500
Routing

Festool Roundover cutter HW R3-OFK 500

Festool
490093
€75.37
Strengths and benefitsDouble-Bladed cutter (Z2): Longer lifespan thanks to the two carbide edges.Special cutter: For rounding off edges, innit?Cutter radius: Spot on for the ball bearing.Low installation height: The flush ball bearing mount of the cutter lets you route in rebates or on a stack of panels.To protect the surface: The radius transitions into...
Festool Roundover cutter HW R4-OFK 500
Routing

Festool Roundover cutter HW R4-OFK 500

Festool
490094
€81.68
Strengths and benefitsDouble-Bladed cutter (Z2): Longer lifespan thanks to the two carbide edges.Special cutter: For rounding off edges, innit?Cutter radius: Spot on for the ball bearing.Low installation height: The flush ball bearing mount of the cutter lets you route in rebates or on a stack of panels.To protect the surface: The radius transitions into...
Festool Roundover cutter HW R5-OFK 500
Routing

Festool Roundover cutter HW R5-OFK 500

Festool
490095
€88.12
Strengths and benefitsDouble-Bladed cutter (Z2): Longer lifespan thanks to the two carbide edges.Special cutter: For rounding off edges, innit?Cutter radius: Spot on for the ball bearing.Low installation height: The flush ball bearing mount of the cutter lets you route in rebates or on a stack of panels.To protect the surface: The radius transitions into...
Festool Roundover cutter HW R6-OFK 500
Routing

Festool Roundover cutter HW R6-OFK 500

Festool
490096
€88.12
Strengths and benefitsDouble-Bladed cutter (Z2): Longer lifespan thanks to the two carbide edges.Special cutter: For rounding off edges, innit?Cutter radius: Spot on for the ball bearing.Low installation height: The flush ball bearing mount of the cutter lets you route in rebates or on a stack of panels.To protect the surface: The radius transitions into...
Festool Ball bearing guide KLS-D 15,8-OFK
Routing

Festool Ball bearing guide KLS-D 15,8-OFK

Festool
490249
€23.83
Main areas of useReplacement ball bearing for various cutters of the OFK 500Notefor cutters 490090, 490091, 490092, 490093, 490094, 490095, 490096, 491533, 578376, 578377, 578378precise steel ball bearing with integrated clamping screwWarranty all-inclusive--> Find out more
Festool Ball bearing guide KLS-D22-OFK
Routing

Festool Ball bearing guide KLS-D22-OFK

Festool
490250
€26.79
Main areas of useReplacement ball bearing for the edge trimming cutter of the OFK 500Notefor cutter 490085precise steel ball bearing with integrated clamping screwWarranty all-inclusive--> Find out more
Festool Edge trimming cutter HW/KLS D22/8-OFK
Routing

Festool Edge trimming cutter HW/KLS D22/8-OFK

Festool
490565
€84.27
Strengths and benefitsA special cutter for flush trimming of edgesLong service life thanks to carbide bladesThe diameter of the cutter is exactly coordinated to the ball bearingMain areas of useFor flush trimming plastic or solid wood edgingWith ball bearing guideNotefor OFK 500, OFKC 500with ball bearing guideeasy installation with a screwWarranty...
Festool Profile tongue cutter HW S8 D46 x D12-FD
Routing

Festool Profile tongue cutter HW S8 D46 x D12-FD

Festool
490643
€253.28
One cutter, several applications.Strengths and benefitsSmooth-running carbide-tipped milling headAdjusted to routing of the grooveRouting of the spring also possible through conversionMain areas of useFor routing classical braced doors in different stylesBy adapting the cutter set, tongue and groove profiles can be routed with a toolNotefor OF 900, OF...
Festool Copying ring KR D17/OF 1010/VS 600 Festool Copying ring KR D17/OF 1010/VS 600 2
Routing

Festool Copying ring KR D17/OF 1010/VS 600

Festool
490770
€19.22
Strengths and benefitsA perfect system with the templates for semi-covered or open dovetail jointMain areas of useCopying ring for the jointing system VS 600Notefor OF 900, OF 1000, OF 1010, OF 1010 Rappropriate for the SZ 14 and SZO 14 templates of the VS 600 jointing systemthe copying ring can be precisely centred with centring mandrel 492187Warranty...
Festool Copying ring KR D24/OF 1010/VS 600 Festool Copying ring KR D24/OF 1010/VS 600 2
Routing

Festool Copying ring KR D24/OF 1010/VS 600

Festool
490771
€19.22
Strengths and benefitsA perfect system with the templates for semi-covered or open dovetail jointMain areas of useCopying ring for the jointing system VS 600Notefor OF 900, OF 1000, OF 1010, OF 1010 Rappropriate for the SZ 20 and SZO 20 templates of the VS 600 jointing systemthe copying ring can be precisely centred with centring mandrel 492187Warranty...
Festool Copying ring KR D8,5/OF 1010/VS 600 Festool Copying ring KR D8,5/OF 1010/VS 600 2
Routing

Festool Copying ring KR D8,5/OF 1010/VS 600

Festool
490772
€19.22
Strengths and benefitsA perfect system with the templates for box joints or open dovetail jointsMain areas of useCopying ring for the jointing system VS 600Notefor OF 900, OF 1000, OF 1010, OF 1010 Rappropriate for the SZO 14 template of the VS 600 jointing systemappropriate for the FZ 6 template of the VS 600 jointing systemthe copying ring can be...
Festool Groove cutter HS S8 D 3/8
Routing

Festool Groove cutter HS S8 D 3/8

Festool
490941
€20.86
Strengths and benefitsPerfect results when routing in softwoodAn optimal cutter geometry, a stable cutter shaft and the proper sharpness ensure flawless surfacesMain areas of useSingle-edged router bits in HS steel are ideally suited for softwood applicationsNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200HS steel groove...
Festool Groove cutter HS S8 D 4/15
Routing

Festool Groove cutter HS S8 D 4/15

Festool
490942
€20.86
Strengths and benefitsPerfect results when routing in softwoodAn optimal cutter geometry, a stable cutter shaft and the proper sharpness ensure flawless surfacesMain areas of useSingle-edged router bits in HS steel are ideally suited for softwood applicationsNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200HS steel groove...
Festool Groove cutter HS S8 D 5/12
Routing

Festool Groove cutter HS S8 D 5/12

Festool
490943
€20.86
Strengths and benefitsPerfect results when routing in softwoodAn optimal cutter geometry, a stable cutter shaft and the proper sharpness ensure flawless surfacesMain areas of useSingle-edged router bits in HS steel are ideally suited for softwood applicationsNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200HS steel groove...
Festool Spiral groove cutter HS Spi S8 D6/21 Festool Spiral groove cutter HS Spi S8 D6/21 2
Routing

Festool Spiral groove cutter HS Spi S8 D6/21

Festool
490944
€33.99
Strengths and benefitsParticularly smooth running spiral groove cutters, in HS steel, optimally suited for softwood applicationsBecause of the spiral shape of the cutter blade, cutter chips are drawn directly upwards and optimally extractedMain areas of usefor slot joints FZ 6 and open dovetail joints SZO 14 with fine precision in diameterNoteWarranty...
Festool Spiral groove cutter HS Spi S8 D8/19 Festool Spiral groove cutter HS Spi S8 D8/19 2
Routing

Festool Spiral groove cutter HS Spi S8 D8/19

Festool
490945
€26.22
Strengths and benefitsThe drawing cut of the cutter generates less cutting pressure, thus creating clean routing resultsMain areas of useParticularly smooth running spiral groove cutters, in HS steel, optimally suited for softwood applicationsBecause of the spiral shape of the cutter blade, cutter chips are drawn directly upwards and optimally...
Festool Spiral groove cutter HS Spi S8 D10/30 Festool Spiral groove cutter HS Spi S8 D10/30 2
Routing

Festool Spiral groove cutter HS Spi S8 D10/30

Festool
490946
€39.36
Strengths and benefitsParticularly smooth running spiral groove cutters, in HS steel, optimally suited for softwood applicationsBecause of the spiral shape of the cutter blade, cutter chips are drawn directly upwards and optimally extractedMain areas of usefor slot joints FZ 10 and open dovetail joints SZO 20 with fine precision in diameterNoteWarranty...
Festool Spiral groove cutter HS Spi S8 D12/20 Festool Spiral groove cutter HS Spi S8 D12/20 2
Routing

Festool Spiral groove cutter HS Spi S8 D12/20

Festool
490947
€32.33
Strengths and benefitsThe drawing cut of the cutter generates less cutting pressure, thus creating clean routing resultsMain areas of useParticularly smooth running spiral groove cutters, in HS steel, optimally suited for softwood applicationsBecause of the spiral shape of the cutter blade, cutter chips are drawn directly upwards and optimally...
Festool Spiral groove cutter HS Spi S8 D14/20 Festool Spiral groove cutter HS Spi S8 D14/20 2
Routing

Festool Spiral groove cutter HS Spi S8 D14/20

Festool
490948
€35.65
Strengths and benefitsThe drawing cut of the cutter generates less cutting pressure, thus creating clean routing resultsMain areas of useParticularly smooth running spiral groove cutters, in HS steel, optimally suited for softwood applicationsBecause of the spiral shape of the cutter blade, cutter chips are drawn directly upwards and optimally...
Festool Spiral groove cutter HS Spi S8 D16/20 Festool Spiral groove cutter HS Spi S8 D16/20 2
Routing

Festool Spiral groove cutter HS Spi S8 D16/20

Festool
490949
€39.36
Strengths and benefitsThe drawing cut of the cutter generates less cutting pressure, thus creating clean routing resultsMain areas of useParticularly smooth running spiral groove cutters, in HS steel, optimally suited for softwood applicationsBecause of the spiral shape of the cutter blade, cutter chips are drawn directly upwards and optimally...
Festool Spiral groove cutter HS Spi S8 D18/25 Festool Spiral groove cutter HS Spi S8 D18/25 2
Routing

Festool Spiral groove cutter HS Spi S8 D18/25

Festool
490950
€45.63
Strengths and benefitsThe drawing cut of the cutter generates less cutting pressure, thus creating clean routing resultsMain areas of useParticularly smooth running spiral groove cutters, in HS steel, optimally suited for softwood applicationsBecause of the spiral shape of the cutter blade, cutter chips are drawn directly upwards and optimally...
Festool Spiral groove cutter HS Spi S8 D20/25 Festool Spiral groove cutter HS Spi S8 D20/25 2
Routing

Festool Spiral groove cutter HS Spi S8 D20/25

Festool
490951
€48.96
Strengths and benefitsThe drawing cut of the cutter generates less cutting pressure, thus creating clean routing resultsMain areas of useParticularly smooth running spiral groove cutters, in HS steel, optimally suited for softwood applicationsBecause of the spiral shape of the cutter blade, cutter chips are drawn directly upwards and optimally...
Festool Groove cutter HW S8 D3/6
Routing

Festool Groove cutter HW S8 D3/6

Festool
490952
€42.31
Strengths and benefitsThe base blade allows plunge-cutting of the cutter into the workpieceLong service lives are achieved thanks to the solid carbide designPerfectly suited to a multitude of materialsMain areas of useMore security against small diameter bits breaking because of the low vibration all tungsten carbide cutter designThe partially ground...
Festool Groove cutter HW S8 D4/10
Routing

Festool Groove cutter HW S8 D4/10

Festool
490953
€42.31
Strengths and benefitsThe base blade allows plunge-cutting of the cutter into the workpieceLong service lives are achieved thanks to the solid carbide designPerfectly suited to a multitude of materialsMain areas of useMore security against small diameter bits breaking because of the low vibration all tungsten carbide cutter designThe partially ground...
Festool Groove cutter HW S8 D5/12
Routing

Festool Groove cutter HW S8 D5/12

Festool
490954
€43.22
Strengths and benefitsThe base blade allows plunge-cutting of the cutter into the workpieceLong service lives are achieved thanks to the solid carbide designPerfectly suited to a multitude of materialsMain areas of useMore security against small diameter bits breaking because of the low vibration all tungsten carbide cutter designThe partially ground...
Festool Groove cutter HW S8 D6/14
Routing

Festool Groove cutter HW S8 D6/14

Festool
490955
€44.18
Strengths and benefitsThe base blade allows plunge-cutting of the cutter into the workpieceLong service lives are achieved thanks to the solid carbide designPerfectly suited to a multitude of materialsMain areas of useMore security against small diameter bits breaking because of the low vibration all tungsten carbide cutter designThe partially ground...
Festool Groove cutter HW S8 D7/17
Routing

Festool Groove cutter HW S8 D7/17

Festool
490956
€46.56
Strengths and benefitsThe base blade allows plunge-cutting of the cutter into the workpieceLong service lives are achieved thanks to the solid carbide designPerfectly suited to a multitude of materialsMain areas of useMore security against small diameter bits breaking because of the low vibration all tungsten carbide cutter designThe partially ground...
Festool Groove cutter HW S8 D8/20
Routing

Festool Groove cutter HW S8 D8/20

Festool
490957
€47.67
Strengths and benefitsThe base blade allows plunge-cutting of the cutter into the workpieceLong service lives are achieved thanks to the solid carbide designPerfectly suited to a multitude of materialsMain areas of useMore security against small diameter bits breaking because of the low vibration all tungsten carbide cutter designThe partially ground...
Festool Groove cutter HW S8 D9/23
Routing

Festool Groove cutter HW S8 D9/23

Festool
490958
€39.93
Strengths and benefitsLong router bit service life even for plunge cutting because of the soldered standard tungsten carbide bladeAn optimal cutter geometry, a stable cutter shaft and the proper sharpness ensure flawless surfacesMain areas of useGrooves in furniture manufacturingRouting fittingsRebating of solid wood and panel materialWorking with...
Festool Groove cutter HW S8 D10/20
Routing

Festool Groove cutter HW S8 D10/20

Festool
490959
€40.09
Strengths and benefitsLong router bit service life even for plunge cutting because of the soldered standard tungsten carbide bladeAn optimal cutter geometry, a stable cutter shaft and the proper sharpness ensure flawless surfacesMain areas of useGrooves in furniture manufacturingRouting fittingsRebating of solid wood and panel materialWorking with...
Festool Groove cutter HW S8 D10/25
Routing

Festool Groove cutter HW S8 D10/25

Festool
490960
€43.79
Strengths and benefitsLong router bit service life even for plunge cutting because of the soldered standard tungsten carbide bladeAn optimal cutter geometry, a stable cutter shaft and the proper sharpness ensure flawless surfacesMain areas of useGrooves in furniture manufacturingRouting fittingsRebating of solid wood and panel materialWorking with...
Festool Groove cutter HW S8 D11/20
Routing

Festool Groove cutter HW S8 D11/20

Festool
490961
€44.33
Strengths and benefitsLong router bit service life even for plunge cutting because of the soldered standard tungsten carbide bladeAn optimal cutter geometry, a stable cutter shaft and the proper sharpness ensure flawless surfacesMain areas of useGrooves in furniture manufacturingRouting fittingsRebating of solid wood and panel materialWorking with...
Festool Groove cutter HW S8 D12/20
Routing

Festool Groove cutter HW S8 D12/20

Festool
490962
€45.63
Strengths and benefitsLong router bit service life even for plunge cutting because of the soldered standard tungsten carbide bladeAn optimal cutter geometry, a stable cutter shaft and the proper sharpness ensure flawless surfacesMain areas of useGrooves in furniture manufacturingRouting fittingsRebating of solid wood and panel materialWorking with...
Festool Groove cutter HW S8 D13/20
Routing

Festool Groove cutter HW S8 D13/20

Festool
490963
€47.67
Strengths and benefitsLong router bit service life even for plunge cutting because of the soldered standard tungsten carbide bladeAn optimal cutter geometry, a stable cutter shaft and the proper sharpness ensure flawless surfacesMain areas of useGrooves in furniture manufacturingRouting fittingsRebating of solid wood and panel materialWorking with...
Festool Groove cutter HW S8 D14/20
Routing

Festool Groove cutter HW S8 D14/20

Festool
490964
€48.59
Strengths and benefitsLong router bit service life even for plunge cutting because of the soldered standard tungsten carbide bladeAn optimal cutter geometry, a stable cutter shaft and the proper sharpness ensure flawless surfacesMain areas of useGrooves in furniture manufacturingRouting fittingsRebating of solid wood and panel materialWorking with...
Festool Groove cutter HW S8 D15/20
Routing

Festool Groove cutter HW S8 D15/20

Festool
490965
€51.53
Strengths and benefitsLong router bit service life even for plunge cutting because of the soldered standard tungsten carbide bladeAn optimal cutter geometry, a stable cutter shaft and the proper sharpness ensure flawless surfacesMain areas of useGrooves in furniture manufacturingRouting fittingsRebating of solid wood and panel materialWorking with...
Festool Groove cutter HW S8 D16/20
Routing

Festool Groove cutter HW S8 D16/20

Festool
490966
€56.73
Strengths and benefitsLong router bit service life even for plunge cutting because of the soldered standard tungsten carbide bladeAn optimal cutter geometry, a stable cutter shaft and the proper sharpness ensure flawless surfacesMain areas of useGrooves in furniture manufacturingRouting fittingsRebating of solid wood and panel materialWorking with...
Festool Groove cutter HW S8 D16/30
Routing

Festool Groove cutter HW S8 D16/30

Festool
490967
€57.82
Strengths and benefitsLong router bit service life even for plunge cutting because of the soldered standard tungsten carbide bladeAn optimal cutter geometry, a stable cutter shaft and the proper sharpness ensure flawless surfacesMain areas of useGrooves in furniture manufacturingRouting fittingsRebating of solid wood and panel materialWorking with...
Festool Groove cutter HW S8 D18/20
Routing

Festool Groove cutter HW S8 D18/20

Festool
490968
€60.22
Strengths and benefitsLong router bit service life even for plunge cutting because of the soldered standard tungsten carbide bladeAn optimal cutter geometry, a stable cutter shaft and the proper sharpness ensure flawless surfacesMain areas of useGrooves in furniture manufacturingRouting fittingsRebating of solid wood and panel materialWorking with...
Festool Groove cutter HW S8 D18/30
Routing

Festool Groove cutter HW S8 D18/30

Festool
490969
€60.95
Strengths and benefitsLong router bit service life even for plunge cutting because of the soldered standard tungsten carbide bladeAn optimal cutter geometry, a stable cutter shaft and the proper sharpness ensure flawless surfacesMain areas of useGrooves in furniture manufacturingRouting fittingsRebating of solid wood and panel materialWorking with...
Festool Groove cutter HW S8 D19/20
Routing

Festool Groove cutter HW S8 D19/20

Festool
490970
€61.51
Strengths and benefitsLong router bit service life even for plunge cutting because of the soldered standard tungsten carbide bladeAn optimal cutter geometry, a stable cutter shaft and the proper sharpness ensure flawless surfacesMain areas of useGrooves in furniture manufacturingRouting fittingsRebating of solid wood and panel materialWorking with...
Festool Groove cutter HW S8 D20/20
Routing

Festool Groove cutter HW S8 D20/20

Festool
490971
€61.92
Strengths and benefitsLong router bit service life even for plunge cutting because of the soldered standard tungsten carbide bladeAn optimal cutter geometry, a stable cutter shaft and the proper sharpness ensure flawless surfacesMain areas of useGrooves in furniture manufacturingRouting fittingsRebating of solid wood and panel materialWorking with...
Festool Groove cutter HW S8 D20/30
Routing

Festool Groove cutter HW S8 D20/30

Festool
490972
€63.93
Strengths and benefitsLong router bit service life even for plunge cutting because of the soldered standard tungsten carbide bladeAn optimal cutter geometry, a stable cutter shaft and the proper sharpness ensure flawless surfacesMain areas of useGrooves in furniture manufacturingRouting fittingsRebating of solid wood and panel materialWorking with...
Festool Groove cutter HW S8 D22/20
Routing

Festool Groove cutter HW S8 D22/20

Festool
490973
€66.31
Strengths and benefitsLong router bit service life even for plunge cutting because of the soldered standard tungsten carbide bladeAn optimal cutter geometry, a stable cutter shaft and the proper sharpness ensure flawless surfacesMain areas of useGrooves in furniture manufacturingRouting fittingsRebating of solid wood and panel materialWorking with...
Festool Groove cutter HW S8 D24/20
Routing

Festool Groove cutter HW S8 D24/20

Festool
490974
€70.37
Strengths and benefitsLong router bit service life even for plunge cutting because of the soldered standard tungsten carbide bladeAn optimal cutter geometry, a stable cutter shaft and the proper sharpness ensure flawless surfacesMain areas of useGrooves in furniture manufacturingRouting fittingsRebating of solid wood and panel materialWorking with...
Festool Groove cutter HW S8 D25/20
Routing

Festool Groove cutter HW S8 D25/20

Festool
490975
€77.95
Strengths and benefitsLong router bit service life even for plunge cutting because of the soldered standard tungsten carbide bladeAn optimal cutter geometry, a stable cutter shaft and the proper sharpness ensure flawless surfacesMain areas of useGrooves in furniture manufacturingRouting fittingsRebating of solid wood and panel materialWorking with...
Festool Groove cutter HW S8 D30/20
Routing

Festool Groove cutter HW S8 D30/20

Festool
490976
€86.83
Strengths and benefitsLong router bit service life even for plunge cutting because of the soldered standard tungsten carbide bladeAn optimal cutter geometry, a stable cutter shaft and the proper sharpness ensure flawless surfacesMain areas of useGrooves in furniture manufacturingRouting fittingsRebating of solid wood and panel materialWorking with...
Festool Spiral groove cutter HW Spi S8 D4/10 Festool Spiral groove cutter HW Spi S8 D4/10 2
Routing

Festool Spiral groove cutter HW Spi S8 D4/10

Festool
490977
€66.51
Strengths and benefitsThe drawing cut of the cutter generates less cutting pressure, thus creating clean routing resultsDue to the spiral shape, the chips are transported upwards and can be perfectly extracted thereMain areas of useParticularly smooth running spiral groove cutters, in HW steel optimally suited for panel materials and hardwood...
Festool Spiral groove cutter HW Spi S8 D6/21 Festool Spiral groove cutter HW Spi S8 D6/21 2
Routing

Festool Spiral groove cutter HW Spi S8 D6/21

Festool
490978
€70.02
Strengths and benefitsParticularly smooth-running spiral groove cutters, in carbide optimally suited to panel materials and hardwood applicationsMain areas of usefor slot joints FZ 6 and open dovetail joints SZO 14 with fine precision in diameterNoteWarranty all-inclusive--> Find out more
Festool Spiral groove cutter HW Spi S8 D8/25 Festool Spiral groove cutter HW Spi S8 D8/25 2
Routing

Festool Spiral groove cutter HW Spi S8 D8/25

Festool
490979
€74.08
Strengths and benefitsThe drawing cut of the cutter generates less cutting pressure, thus creating clean routing resultsMain areas of useParticularly smooth running spiral groove cutters, in HW steel optimally suited for panel materials and hardwood applicationsBecause of the spiral shape of the cutter blade, cutter chips are drawn directly upwards and...
Festool Spiral groove cutter HW Spi S8 D10/30 Festool Spiral groove cutter HW Spi S8 D10/30 2
Routing

Festool Spiral groove cutter HW Spi S8 D10/30

Festool
490980
€86.83
Strengths and benefitsParticularly smooth-running spiral groove cutters, in carbide optimally suited to panel materials and hardwood applicationsBecause of the spiral shape of the cutter blade, cutter chips are drawn directly upwards and optimally extractedMain areas of usefor slot joints FZ 10 and open dovetail joints SZO 20 with fine precision in...
Festool Flute cutter HW S8 R4
Routing

Festool Flute cutter HW S8 R4

Festool
490983
€41.19
Strengths and benefitsDouble-bladed carbide cutter with outstanding service lifeHas base blades and thus enables plunge-cutting into the materialFlute cutters and radius routers can be ideally combined, e.g., for profiles and counter profilesMain areas of useRouting softwood and hardwood, as well as wood composite materials such as solid wood, panel...
Festool Flute cutter HW S8 R6,35
Routing

Festool Flute cutter HW S8 R6,35

Festool
490984
€46.56
Strengths and benefitsDouble-bladed carbide cutter with outstanding service lifeHas base blades and thus enables plunge-cutting into the materialFlute cutters and radius routers can be ideally combined, e.g., for profiles and counter profilesMain areas of useRouting softwood and hardwood, as well as wood composite materials such as solid wood, panel...
Festool Flute cutter HW S8 R8 Festool Flute cutter HW S8 R8 2
Routing

Festool Flute cutter HW S8 R8

Festool
490985
€51.53
Strengths and benefitsDouble-bladed carbide cutter with outstanding service lifeHas base blades and thus enables plunge-cutting into the materialFlute cutters and radius routers can be ideally combined, e.g., for profiles and counter profilesMain areas of useRouting softwood and hardwood, as well as wood composite materials such as solid wood, panel...
Festool Flute cutter HW S8 R9,7
Routing

Festool Flute cutter HW S8 R9,7

Festool
490986
€55.97
Strengths and benefitsDouble-bladed carbide cutter with outstanding service lifeHas base blades and thus enables plunge-cutting into the materialFlute cutters and radius routers can be ideally combined, e.g., for profiles and counter profilesMain areas of useRouting softwood and hardwood, as well as wood composite materials such as solid wood, panel...
Festool Flute cutter HW S8 R12,7
Routing

Festool Flute cutter HW S8 R12,7

Festool
490987
€62.62
Strengths and benefitsDouble-bladed carbide cutter with outstanding service lifeHas base blades and thus enables plunge-cutting into the materialFlute cutters and radius routers can be ideally combined, e.g., for profiles and counter profilesMain areas of useRouting softwood and hardwood, as well as wood composite materials such as solid wood, panel...
Festool Dovetail cutter HW S8 D14,3/13,5/15° Festool Dovetail cutter HW S8 D14,3/13,5/15° 2
Routing

Festool Dovetail cutter HW S8 D14,3/13,5/15°

Festool
490990
€60.22
Strengths and benefitsThe tool is equipped with a scoring unit especially for cutting dovetail battensFor better joining, the corner area is cut behindMain areas of useRouting dovetail battensNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400with pre-cutterWarranty all-inclusive--> Find out more
Festool Dovetail cutter HS S8 D13,8/13,5/15°
Routing

Festool Dovetail cutter HS S8 D13,8/13,5/15°

Festool
490991
€29.56
Strengths and benefitsWith the matched system consisting of a router, template and cutter, traditional exposed and blind dovetail joints can be made in no time at allMain areas of useFor creating a semi-covered SZ 14 dovetail jointNoteWarranty all-inclusive--> Find out more
Festool Dovetail cutter HW S8 D13,8/13,5/15° Festool Dovetail cutter HW S8 D13,8/13,5/15° 2
Routing

Festool Dovetail cutter HW S8 D13,8/13,5/15°

Festool
490992
€51.53
Strengths and benefitsWith the matched system consisting of a router, template and cutter, traditional exposed and blind dovetail joints can be made in no time at allMain areas of useFor creating a semi-covered SZ 14 dovetail jointNoteWarranty all-inclusive--> Find out more
Festool Dovetail cutter HW S8 D16/13,5/15° Festool Dovetail cutter HW S8 D16/13,5/15° 2
Routing

Festool Dovetail cutter HW S8 D16/13,5/15°

Festool
490993
€61.92
Strengths and benefitsWith the matched system consisting of a router, template and cutter, traditional exposed and blind dovetail joints can be made in no time at allMain areas of useFor creating a semi-covered SZ 14 dovetail jointNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200for semi-covered dovetail joints SZ 14carbide blades are...
Festool Dovetail cutter HW S8 D20/17/15° Festool Dovetail cutter HW S8 D20/17/15° 2
Routing

Festool Dovetail cutter HW S8 D20/17/15°

Festool
490996
€58.57
Strengths and benefitsWith the matched system consisting of a router, template and cutter, traditional exposed and blind dovetail joints can be made in no time at allMain areas of useFor creating an open SZ 20 dovetail jointNoteWarranty all-inclusive--> Find out more
Festool V-groove cutter HS S8 D11/9,5/60°
Routing

Festool V-groove cutter HS S8 D11/9,5/60°

Festool
490997
€19.95
Strengths and benefitsDesign in HS steel with cutting angles specially optimised for routing in softwoodMain areas of useSuitable for chamfering of softwoods and panel materialsFor routing V-grooves and decorative groovesNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200in HS steelWarranty all-inclusive--> Find out more
Festool V-groove cutter HS S8 D14/7/90°
Routing

Festool V-groove cutter HS S8 D14/7/90°

Festool
490998
€21.62
Strengths and benefitsDesign in HS steel with cutting angles specially optimised for routing in softwoodMain areas of useSuitable for chamfering of softwoods and panel materialsFor routing V-grooves and decorative groovesNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200in HS steelWarranty all-inclusive--> Find out more
Festool V-groove cutter HW S8 D14/7/90° Festool V-groove cutter HW S8 D14/7/90° 2
Routing

Festool V-groove cutter HW S8 D14/7/90°

Festool
490999
€46.56
Strengths and benefitsTwo carbide blades ensure clean routing results and a long service lifeMain areas of useSuitable for chamfering of hardwoods and panel materialsFor routing V-grooves and decorative groovesNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200HW bladesWarranty all-inclusive--> Find out more
Festool Plasterboard V-groove cutter HW S8 D12,5/45° Festool Plasterboard V-groove cutter HW S8 D12,5/45° 2
Routing

Festool Plasterboard V-groove cutter HW S8 D12,5/45°

Festool
491000
€61.92
Strengths and benefitsThe cutter geometry is optimised for swift working in plasterboard panelsLong service life thanks to carbide bladesMain areas of usePlasterboards can easily be cut at 45° or 90° angles using the plasterboard panel router and the guide systemThe plasterboard cover is not cut through, allowing the corner to be simply foldedNotefor OF...
Festool Plasterboard V-groove cutter HW S8 D32/90° Festool Plasterboard V-groove cutter HW S8 D32/90° 2
Routing

Festool Plasterboard V-groove cutter HW S8 D32/90°

Festool
491001
€81.46
Strengths and benefitsThe cutter geometry is optimised for swift working in plasterboard panelsLong service life thanks to carbide bladesMain areas of usePlasterboards can easily be cut at 45° or 90° angles using the plasterboard panel router and the guide systemThe plasterboard cover is not cut through, allowing the corner to be simply foldedNotefor OF...
Festool Script cutter HS S8 D11/60°
Routing

Festool Script cutter HS S8 D11/60°

Festool
491002
€49.89
Strengths and benefitsThe HS metal cutter is specially suited to soft wood typesMain areas of useA fine-grained wood is suggested for script cutting because the power tool can then be guided without jerkingNotefor OF 900, OF 1000, OF 1010, OF 1010 Rfor script cutting in softwoodWarranty all-inclusive--> Find out more
Festool Script cutter HW S8 D11/60° Festool Script cutter HW S8 D11/60° 2
Routing

Festool Script cutter HW S8 D11/60°

Festool
491003
€61.92
Strengths and benefitsThe carbide-tipped cutter is also suitable for hardwoodMain areas of useA fine-grained wood is suggested for script cutting because the power tool can then be guided without jerkingNotefor OF 900, OF 1000, OF 1010, OF 1010 Rfor script cutting in hardwoodWarranty all-inclusive--> Find out more
Festool Roundover cutter HW S8 D16,7/R2 KL Festool Roundover cutter HW S8 D16,7/R2 KL 2
Routing

Festool Roundover cutter HW S8 D16,7/R2 KL

Festool
491009
€71.49
Strengths and benefitsVarious profiles can be routed by using various ball bearing guide diametersTwo carbide blades ensure a long service lifeThe ball bearing mount can be quickly and efficiently replaced via a screwMain areas of useProfiling of solid wood and panel materialsNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200, MFK 700,...
Festool Roundover cutter HW S8 D19,1/R3 KL
Routing

Festool Roundover cutter HW S8 D19,1/R3 KL

Festool
491010
€72.60
Strengths and benefitsVarious profiles can be routed by using various ball bearing guide diametersTwo carbide blades ensure a long service lifeThe ball bearing mount can be quickly and efficiently replaced via a screwMain areas of useProfiling of solid wood and panel materialsNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200, MFK 700,...
Festool Roundover cutter HW S8 D20,7/R4 KL
Routing

Festool Roundover cutter HW S8 D20,7/R4 KL

Festool
491011
€73.36
Strengths and benefitsVarious profiles can be routed by using various ball bearing guide diametersTwo carbide blades ensure a long service lifeThe ball bearing mount can be quickly and efficiently replaced via a screwMain areas of useProfiling of solid wood and panel materialsNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200, MFK 700,...
Festool Roundover cutter HW S8 D22,7/R5 KL Festool Roundover cutter HW S8 D22,7/R5 KL 2
Routing

Festool Roundover cutter HW S8 D22,7/R5 KL

Festool
491012
€74.08
Strengths and benefitsVarious profiles can be routed by using various ball bearing guide diametersTwo carbide blades ensure a long service lifeThe ball bearing mount can be quickly and efficiently replaced via a screwMain areas of useProfiling of solid wood and panel materialsNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200, MFK 700,...
Festool Roundover cutter HW S8 D25,5/R6,35 KL
Routing

Festool Roundover cutter HW S8 D25,5/R6,35 KL

Festool
491013
€75.93
Strengths and benefitsVarious profiles can be routed by using various ball bearing guide diametersTwo carbide blades ensure a long service lifeThe ball bearing mount can be quickly and efficiently replaced via a screwMain areas of useProfiling of solid wood and panel materialsNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200, MFK 700,...
Festool Roundover cutter HW S8 D28,7/R8 KL
Routing

Festool Roundover cutter HW S8 D28,7/R8 KL

Festool
491014
€78.87
Strengths and benefitsVarious profiles can be routed by using various ball bearing guide diametersTwo carbide blades ensure a long service lifeThe ball bearing mount can be quickly and efficiently replaced via a screwMain areas of useProfiling of solid wood and panel materialsNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200, MFK 700,...
Festool Roundover cutter HW S8 D31,7/R9,5 KL Festool Roundover cutter HW S8 D31,7/R9,5 KL 2
Routing

Festool Roundover cutter HW S8 D31,7/R9,5 KL

Festool
491015
€81.86
Strengths and benefitsVarious profiles can be routed by using various ball bearing guide diametersTwo carbide blades ensure a long service lifeThe ball bearing mount can be quickly and efficiently replaced via a screwMain areas of useProfiling of solid wood and panel materialsNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200, MFK 700,...
Festool Roundover cutter HW S8 D38,1/R12,7 KL
Routing

Festool Roundover cutter HW S8 D38,1/R12,7 KL

Festool
491016
€90.52
Strengths and benefitsVarious profiles can be routed by using various ball bearing guide diametersTwo carbide blades ensure a long service lifeThe ball bearing mount can be quickly and efficiently replaced via a screwMain areas of useProfiling of solid wood and panel materialsNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200with ball...
Festool Roundover cutter HW S8 D42,7/R15 KL
Routing

Festool Roundover cutter HW S8 D42,7/R15 KL

Festool
491017
€95.33
Strengths and benefitsVarious profiles can be routed by using various ball bearing guide diametersTwo carbide blades ensure a long service lifeThe ball bearing mount can be quickly and efficiently replaced via a screwMain areas of useProfiling of solid wood and panel materialsNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200with ball...
Festool Rebating cutter HW S8 D31,7/NL 12,7
Routing

Festool Rebating cutter HW S8 D31,7/NL 12,7

Festool
491022
€66.51
Strengths and benefitsPerfect guidance along the workpieces thanks to quality ball bearingPrecisely sanded shanks ensure precise true-runningIdeal when rebating curved workpiecesMain areas of useBy replacing the ball bearing (Set No. 491406) with sizes of 4.9 mm, 6.36 mm, 7.9 mm and 11 mm, the rebate depth of 9.5 mm can be expanded to a wider rangeNotefor...
Festool Chamfer cutter HW S8 D36/45° Festool Chamfer cutter HW S8 D36/45° 2
Routing

Festool Chamfer cutter HW S8 D36/45°

Festool
491025
€69.10
Strengths and benefitsThe chamfer cutter can be used with or without a ball bearingThe large effective length allows thicker materials to also be chamferedMain areas of useChamfering chipboardChamfering solid woodNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200Chamfer cutter 45° for edge trimmingwith 12.7 mm ball bearing...
Festool Edge trimming chamfer cutter HW S8 D24/0° +45° Festool Edge trimming chamfer cutter HW S8 D24/0° +45° 2
Routing

Festool Edge trimming chamfer cutter HW S8 D24/0° +45°

Festool
491026
€54.33
Strengths and benefitsThe combination router with two functions – chamfer milling and flush trimming in a single work stepThe plastic coated ball bearing leaves no traces behind and protects the panel edgesMain areas of useFlush trimming and chamfering in one work stepNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200, MFK 700, MFKC...
Festool Edge trimming cutter HW S8 D12,7/NL25 Festool Edge trimming cutter HW S8 D12,7/NL25 2
Routing

Festool Edge trimming cutter HW S8 D12,7/NL25

Festool
491027
€69.10
Strengths and benefitsEdge trimming cutter with ball bearing below – this allows coatings in and on panel edges to be flush cutBecause of the small ball bearing, even inner radii of 15 mm can be flush cutMain areas of useEdge trimming cutter with ball bearing on the bottom makes 1:1 copying of templates possibleFlush trimming of panel coatingsNoteWarranty...
Festool Edge trimming cutter HW S8 D19/NL25 Festool Edge trimming cutter HW S8 D19/NL25 2
Routing

Festool Edge trimming cutter HW S8 D19/NL25

Festool
491028
€72.60
Strengths and benefitsThe ball bearing at the top allows working from the upper side of the workpieceLong service life thanks to carbide bladesMain areas of useEdge trimming cutter with ball bearing on top makes 1:1 copying of templates possibleNoteWarranty all-inclusive--> Find out more
Festool Hand rail cutter HW S8 R16/NL32
Routing

Festool Hand rail cutter HW S8 R16/NL32

Festool
491033
€109.54
Strengths and benefitsWhenever protruding fittings would impact the overall impression of a workpiece, the grip hole is an alternativeThe entire grip hole can be routed on a door or drawer face in a single passMain areas of useRouting handle openings on furniture frontsNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200ball bearing,...
Festool Tongue and groove cutter HW S8 D34/NL32
Routing

Festool Tongue and groove cutter HW S8 D34/NL32

Festool
491034
€116.39
Strengths and benefitsFor gluing solid woodA long service life is guaranteed thanks to the carbide bladesMain areas of useGluing solid woodNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200HW bladesWarranty all-inclusive--> Find out more
Festool T-slot cutter HW S8 D10,5/NL13
Routing

Festool T-slot cutter HW S8 D10,5/NL13

Festool
491035
€46.56
Strengths and benefitsDouble-bladed T-groove cutter for routing recesses in picture frames for securing directly to the wall and for lowering electrical cablesMain areas of useFor routing T-grooves, picture slots and keyhole mountings in solid wood and panel materialsNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200HW bladesWarranty...
Festool Aluminium cutter HS S8 D5/NL23
Routing

Festool Aluminium cutter HS S8 D5/NL23

Festool
491036
€21.62
Strengths and benefitsThe special blade geometry allows grooves to be routed into aluminium profilesDue to the spiral-shaped blade, the chips are pulled upwards and can be perfectly extractedMain areas of useHS spiral groove cutter for cutting grooves for draining water in aluminium profilesNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF...
Festool Drilling cutter HW S8 D8/19
Routing

Festool Drilling cutter HW S8 D8/19

Festool
491037
€37.33
Strengths and benefitsFor cutouts of any kind – without pre-drilling, the drilling cutter goes right through the coating materialThrough the subsequent routing of contours, splinters on the edges of the coatings are effectively avoidedMain areas of useProcessing HPL laminateFlush trimming of veneered surfacesNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF...
Festool Disk groove cutter HW D40x1,5 Festool Disk groove cutter HW D40x1,5 2
Routing

Festool Disk groove cutter HW D40x1,5

Festool
491038
€27.15
Strengths and benefitsThe carbide-tipped disc groove cutter is perfectly suited to creating grooves for seals or for parquet touch-upCutter replacement is done quickly and easily via a screw on the cutter spindleMain areas of useMake grooves on the front using cutter discs with a cutter width of 1.5 mm to 5 mmThe milling discs can be combined with the...
Festool Disk groove cutter HW D40x2 Festool Disk groove cutter HW D40x2 2
Routing

Festool Disk groove cutter HW D40x2

Festool
491040
€28.47
Strengths and benefitsThe carbide-tipped disc groove cutter is perfectly suited to creating grooves for seals or for parquet touch-upCutter replacement is done quickly and easily via a screw on the cutter spindleMain areas of useMake grooves on the front using cutter discs with a cutter width of 1.5 mm to 5 mmThe milling discs can be combined with the...
Festool Disk groove cutter HW D40x2,5 Festool Disk groove cutter HW D40x2,5 2
Routing

Festool Disk groove cutter HW D40x2,5

Festool
491056
€29.02
Strengths and benefitsThe carbide-tipped disc groove cutter is perfectly suited to creating grooves for seals or for parquet touch-upCutter replacement is done quickly and easily via a screw on the cutter spindleMain areas of useMake grooves on the front using cutter discs with a cutter width of 1.5 mm to 5 mmThe milling discs can be combined with the...
Festool Disk groove cutter HW D40x3 Festool Disk groove cutter HW D40x3 2
Routing

Festool Disk groove cutter HW D40x3

Festool
491057
€29.93
Strengths and benefitsThe carbide-tipped disc groove cutter is perfectly suited to creating grooves for seals or for parquet touch-upCutter replacement is done quickly and easily via a screw on the cutter spindleMain areas of useMake grooves on the front using cutter discs with a cutter width of 1.5 mm to 5 mmThe milling discs can be combined with the...
Festool Disk groove cutter HW D40x4 Festool Disk groove cutter HW D40x4 2
Routing

Festool Disk groove cutter HW D40x4

Festool
491059
€31.22
Strengths and benefitsThe carbide-tipped disc groove cutter is perfectly suited to creating grooves for seals or for parquet touch-upCutter replacement is done quickly and easily via a screw on the cutter spindleMain areas of useMake grooves on the front using cutter discs with a cutter width of 1.5 mm to 5 mmThe milling discs can be combined with the...
Festool Disk groove cutter HW D40x5 Festool Disk groove cutter HW D40x5 2
Routing

Festool Disk groove cutter HW D40x5

Festool
491060
€32.16
Strengths and benefitsThe carbide-tipped disc groove cutter is perfectly suited to creating grooves for seals or for parquet touch-upCutter replacement is done quickly and easily via a screw on the cutter spindleMain areas of useMake grooves on the front using cutter discs with a cutter width of 1.5 mm to 5 mmThe milling discs can be combined with the...
Festool Through-hole drill HW S8 D5/30
Routing

Festool Through-hole drill HW S8 D5/30

Festool
491064
€39.93
Strengths and benefitsThe special cutting geometry means that you don't have to turn the workpiece when drilling hole linesDue to the spiral-shaped blade, the chips are pulled upwards and can be perfectly extractedMain areas of use"Through-hole drilling bits for rows of holes; suitable for cutting through panels with its longer HW drill bit"Notefor OF...
Festool Dowel drill HW D3/16 Festool Dowel drill HW D3/16 2
Routing

Festool Dowel drill HW D3/16

Festool
491065
€48.96
Strengths and benefitsIn conjunction with the hole drilling system, a series of drill holes is quickly and easily createdMain areas of useDowel and hole series drill with an 8 mm shaft, optimised for high cutting speeds when routingNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400without brad pointWarranty all-inclusive--> Find out more
Festool Dowel drill HW S8 D5/30 Z Festool Dowel drill HW S8 D5/30 Z 2
Routing

Festool Dowel drill HW S8 D5/30 Z

Festool
491066
€33.06
Strengths and benefitsThe centring point offers the cutter very good guidanceIn conjunction with the hole drilling system, a series of drill holes is quickly and easily createdMain areas of useDowel and hole series drill with an 8 mm shaft, optimised for high cutting speeds when routingNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400with brad...
Festool Dowel drill HW S8 D6/30 Z Festool Dowel drill HW S8 D6/30 Z 2
Routing

Festool Dowel drill HW S8 D6/30 Z

Festool
491067
€33.99
Strengths and benefitsThe centring point offers the cutter very good guidanceIn conjunction with the hole drilling system, a series of drill holes is quickly and easily createdMain areas of useDowel and hole series drill with an 8 mm shaft, optimised for high cutting speeds when routingNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400with brad...
Festool Dowel drill HW S8 D8/30 Z Festool Dowel drill HW S8 D8/30 Z 2
Routing

Festool Dowel drill HW S8 D8/30 Z

Festool
491068
€35.65
Strengths and benefitsThe centring point offers the cutter very good guidanceIn conjunction with the hole drilling system, a series of drill holes is quickly and easily createdMain areas of useDowel and hole series drill with an 8 mm shaft, optimised for high cutting speeds when routingNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400with brad...
Festool Dowel drill HW S8 D10/30 Z Festool Dowel drill HW S8 D10/30 Z 2
Routing

Festool Dowel drill HW S8 D10/30 Z

Festool
491069
€39.36
Strengths and benefitsThe centring point offers the cutter very good guidanceIn conjunction with the hole drilling system, a series of drill holes is quickly and easily createdMain areas of useDowel and hole series drill with an 8 mm shaft, optimised for high cutting speeds when routingNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400with brad...
Festool Hinge location cutter HW S8 D15
Routing

Festool Hinge location cutter HW S8 D15

Festool
491070
€61.92
Strengths and benefitsHinge location cutter with two carbide blades for an outstanding service lifeIdeal for use in combination with the LR 32 hole drilling systemMain areas of useHoles for hinge fittings in softwood and hardwood, as well as wood composite materials such as solid wood, panel materials, MDF, chipboardNotefor OF 900, OF 1000, OF 1010, OF...
Festool Hinge location cutter HW S8 D20
Routing

Festool Hinge location cutter HW S8 D20

Festool
491072
€72.60
Strengths and benefitsHinge location cutter with two carbide blades for an outstanding service lifeIdeal for use in combination with the LR 32 hole drilling systemMain areas of useHoles for hinge fittings in softwood and hardwood, as well as wood composite materials such as solid wood, panel materials, MDF, chipboardNotefor OF 900, OF 1000, OF 1010, OF...
Festool Hinge location cutter HW S8 D30
Routing

Festool Hinge location cutter HW S8 D30

Festool
491075
€90.33
Strengths and benefitsHinge location cutter with two carbide blades for an outstanding service lifeIdeal for use in combination with the LR 32 hole drilling systemMain areas of useHoles for hinge fittings in softwood and hardwood, as well as wood composite materials such as solid wood, panel materials, MDF, chipboardNotefor OF 900, OF 1000, OF 1010, OF...
Festool Hinge location cutter HW S8 D35
Routing

Festool Hinge location cutter HW S8 D35

Festool
491077
€92.55
Strengths and benefitsHinge location cutter with two carbide blades for an outstanding service lifeIdeal for use in combination with the LR 32 hole drilling systemMain areas of useHoles for hinge fittings in softwood and hardwood, as well as wood composite materials such as solid wood, panel materials, MDF, chipboardNotefor OF 900, OF 1000, OF 1010, OF...
Festool Groove cutter with reversible blades HW S8 D8/20 WP Z1
Routing

Festool Groove cutter with reversible blades HW S8 D8/20 WP Z1

Festool
491078
€134.29
Strengths and benefitsRemovable blades allow working with constant cutter dimensions and high precision – optimal when templates are usedNo re-sharpening, can be used again immediatelyThe blade length of 25 mm also enables routing of deeper groovesMain areas of useRouting templatesGrooves in wood and wood materialsNotefor OF 900, OF 1000, OF 1010, OF 1010...
Festool Groove cutter with reversible blades HW S8 D10/25 WP Z1
Routing

Festool Groove cutter with reversible blades HW S8 D10/25 WP Z1

Festool
491079
€136.15
Strengths and benefitsRemovable blades allow working with constant cutter dimensions and high precision – optimal when templates are usedNo re-sharpening, can be used again immediatelyThe blade length of 25 mm also enables routing of deeper groovesMain areas of useRouting templatesGrooves in wood and wood materialsNotefor OF 900, OF 1000, OF 1010, OF 1010...
Festool Groove cutter with reversible blades HW S8 D12/30 WP Z1 Festool Groove cutter with reversible blades HW S8 D12/30 WP Z1 2
Routing

Festool Groove cutter with reversible blades HW S8 D12/30 WP Z1

Festool
491080
€139.86
Strengths and benefitsRemovable blades allow working with constant cutter dimensions and high precision – optimal when templates are usedNo re-sharpening, can be used again immediatelyThe blade length of 25 mm also enables routing of deeper groovesMain areas of useRouting templatesGrooves in wood and wood materialsNotefor OF 900, OF 1000, OF 1010, OF 1010...
Festool Edge-trimming cutter with reversible blades HW S8 D19/20WM Z2
Routing

Festool Edge-trimming cutter with reversible blades HW S8 D19/20WM Z2

Festool
491082
€142.79
Strengths and benefitsThe replaceable and reversible blade provides lasting cutting dimensions and precision, and is optimally suited for edge trimming excess panel material2 x service life with 20 x 12 mm replaceable bladeMain areas of useFlush trimming of excess panel materialNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200, MFK...
Festool Rebating cutter with reversible blades HW S8 D38/12 Festool Rebating cutter with reversible blades HW S8 D38/12 2
Routing

Festool Rebating cutter with reversible blades HW S8 D38/12

Festool
491085
€134.29
Strengths and benefitsAlways a sharp tool thanks to reversible bladesBy replacing the ball bearing, rebate depths of 8.0 mm, 9.5 mm, 11 mm, 12.6 mm and 14.6 mm can be achievedMain areas of useRouting rebate depths of 8.0 mm, 9.5 mm, 11 mm, 12.6 mm and 14.6 mmNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200with reversible bladeseasy...
Festool Groove cutter HW S12 D10/35
Routing

Festool Groove cutter HW S12 D10/35

Festool
491086
€76.87
Strengths and benefitsLong router bit service life even for plunge cutting because of the soldered standard tungsten carbide bladeAn optimal cutter geometry, a stable cutter shaft and the proper sharpness ensure flawless surfacesMain areas of useGrooves in furniture manufacturingRouting fittingsRebating of solid wood and panel materialWorking with...
Festool Groove cutter HW S12 D12/40
Routing

Festool Groove cutter HW S12 D12/40

Festool
491087
€80.54
Strengths and benefitsLong router bit service life even for plunge cutting because of the soldered standard tungsten carbide bladeAn optimal cutter geometry, a stable cutter shaft and the proper sharpness ensure flawless surfacesMain areas of useGrooves in furniture manufacturingRouting fittingsRebating of solid wood and panel materialWorking with...
Festool Groove cutter HW S12 D14/40
Routing

Festool Groove cutter HW S12 D14/40

Festool
491088
€94.94
Strengths and benefitsLong router bit service life even for plunge cutting because of the soldered standard tungsten carbide bladeAn optimal cutter geometry, a stable cutter shaft and the proper sharpness ensure flawless surfacesMain areas of useGrooves in furniture manufacturingRouting fittingsRebating of solid wood and panel materialWorking with...
Festool Groove cutter HW S12 D14/50
Routing

Festool Groove cutter HW S12 D14/50

Festool
491089
€121.74
Strengths and benefitsLong router bit service life even for plunge cutting because of the soldered standard tungsten carbide bladeAn optimal cutter geometry, a stable cutter shaft and the proper sharpness ensure flawless surfacesMain areas of useGrooves in furniture manufacturingRouting fittingsRebating of solid wood and panel materialWorking with...
Festool Groove cutter HW S12 D16/45
Routing

Festool Groove cutter HW S12 D16/45

Festool
491090
€98.09
Strengths and benefitsLong router bit service life even for plunge cutting because of the soldered standard tungsten carbide bladeAn optimal cutter geometry, a stable cutter shaft and the proper sharpness ensure flawless surfacesMain areas of useGrooves in furniture manufacturingRouting fittingsRebating of solid wood and panel materialWorking with...
Festool Groove cutter HW S12 D16/60
Routing

Festool Groove cutter HW S12 D16/60

Festool
491091
€125.09
Strengths and benefitsLong router bit service life even for plunge cutting because of the soldered standard tungsten carbide bladeAn optimal cutter geometry, a stable cutter shaft and the proper sharpness ensure flawless surfacesMain areas of useGrooves in furniture manufacturingRouting fittingsRebating of solid wood and panel materialWorking with...
Festool Groove cutter HW S12 D18/45
Routing

Festool Groove cutter HW S12 D18/45

Festool
491092
€105.32
Strengths and benefitsLong router bit service life even for plunge cutting because of the soldered standard tungsten carbide bladeAn optimal cutter geometry, a stable cutter shaft and the proper sharpness ensure flawless surfacesMain areas of useGrooves in furniture manufacturingRouting fittingsRebating of solid wood and panel materialWorking with...
Festool Groove cutter HW S12 D20/45
Routing

Festool Groove cutter HW S12 D20/45

Festool
491093
€110.64
Strengths and benefitsLong router bit service life even for plunge cutting because of the soldered standard tungsten carbide bladeAn optimal cutter geometry, a stable cutter shaft and the proper sharpness ensure flawless surfacesMain areas of useGrooves in furniture manufacturingRouting fittingsRebating of solid wood and panel materialWorking with...
Festool Groove cutter HW S12 D24/45
Routing

Festool Groove cutter HW S12 D24/45

Festool
491095
€125.09
Strengths and benefitsLong router bit service life even for plunge cutting because of the soldered standard tungsten carbide bladeAn optimal cutter geometry, a stable cutter shaft and the proper sharpness ensure flawless surfacesMain areas of useGrooves in furniture manufacturingRouting fittingsRebating of solid wood and panel materialWorking with...
Festool Chamfer cutter HW S12 D55/20/45°
Routing

Festool Chamfer cutter HW S12 D55/20/45°

Festool
491102
€119.15
Strengths and benefitsThe chamfer cutter can be used with or without a ball bearingThe large effective length allows thicker materials to also be chamferedMain areas of useThe cutter for the perfect panel profileNotefor the OF 1400, OF 2000, OF 2200HW bladesprecise steel ball bearingWarranty all-inclusive--> Find out more
Festool Roundover cutter HW S12 D63/32/R25
Routing

Festool Roundover cutter HW S12 D63/32/R25

Festool
491107
€175.48
Strengths and benefitsVarious profiles can be routed by using various ball bearing guide diametersTwo carbide blades ensure a long service lifeThe ball bearing mount can be quickly and efficiently replaced via a screwMain areas of useProfiling of solid wood and panel materialsNotefor the OF 1400, OF 2000, OF 2200with ball bearing guidethe router can be...
Festool Groove cutter with reversible blades HW S12 D14/45 WM
Routing

Festool Groove cutter with reversible blades HW S12 D14/45 WM

Festool
491110
€267.50
Strengths and benefitsEasy to switch the reversible bladesExact routing resultsMain areas of useRemovable blades allow working with constant cutter dimensions and high precision – optimal when templates are usedNo re-sharpening, can be used again immediatelyNotefor OF 1400, OF 2200for producing corner connectors using the APS 900Warranty...
Festool Edge-trimming cutter with reversible blades HW S12 D21/30WM
Routing

Festool Edge-trimming cutter with reversible blades HW S12 D21/30WM

Festool
491120
€185.28
Strengths and benefitsThe 12 mm shank makes the cutter very rigidBall bearings and reversible blades are easy to replaceStreak-free routing including with mineral materialsMain areas of useReplaceable blade edge trimming cutter for constant routing depths – the plastic coated ball bearing ensures results with no traces left behindNotefor the OF 1400, OF...
Festool Chamfer cutter HW S8 D25,7/25,7/15° Festool Chamfer cutter HW S8 D25,7/25,7/15° 2
Routing

Festool Chamfer cutter HW S8 D25,7/25,7/15°

Festool
491132
€74.08
Strengths and benefitsThe chamfer cutter can be used with or without a ball bearingThe large effective length allows thicker materials to also be chamferedMain areas of useChamfering chipboardChamfering solid woodNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200Chamfer cutter 15° for edge trimmingwith 12.7 mm ball bearing...
Festool Chamfer cutter HW S8 D38,5/23/30° Festool Chamfer cutter HW S8 D38,5/23/30° 2
Routing

Festool Chamfer cutter HW S8 D38,5/23/30°

Festool
491133
€86.83
Strengths and benefitsThe chamfer cutter can be used with or without a ball bearingThe large effective length allows thicker materials to also be chamferedMain areas of useChamfering chipboardChamfering solid woodNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200Chamfer cutter 30° for edge trimmingwith 12.7 mm ball bearing...
Festool Hand rail cutter HW S8 D22/16/R2,5+6 Festool Hand rail cutter HW S8 D22/16/R2,5+6 2
Routing

Festool Hand rail cutter HW S8 D22/16/R2,5+6

Festool
491140
€103.10
Strengths and benefitsWhenever visible fittings interfere with the overall image of a workpiece, a covered hand grip is always an elegant alternativeThe entire hand grip can be routed on a door or drawer face in a single passMain areas of useRouting hand rails on furniture frontsNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200with HW...
Festool Template-kit VS 600 SZO 14 Festool Template-kit VS 600 SZO 14 2
Routing

Festool Template-kit VS 600 SZO 14

Festool
491152
€218.75
Strengths and benefitsDue to easy insertion into the VS 600 base unit, corner connectors that can be replicated can be created at any timeThe template for the dovetail joints can be adjusted via two eccentric gearsMain areas of useCorner connectors for solid woodNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400open dovetail joint, slot size 14...
Festool Template-kit VS 600 SZO 20 Festool Template-kit VS 600 SZO 20 2
Routing

Festool Template-kit VS 600 SZO 20

Festool
491153
€218.75
Strengths and benefitsDue to easy insertion into the VS 600 base unit, corner connectors that can be replicated can be created at any timeThe template for the dovetail joints can be adjusted via two eccentric gearsMain areas of useCorner connectors for solid woodNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400for exposed dovetail joints, tenon size 20...
Festool Dovetail cutter HW S8 D14,3/16/10° Festool Dovetail cutter HW S8 D14,3/16/10° 2
Routing

Festool Dovetail cutter HW S8 D14,3/16/10°

Festool
491164
€53.94
Main areas of useWith the matched system consisting of a router, template and cutter, traditional exposed and blind dovetail joints can be made in no time at allNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400for open dovetail joints SZO 14Warranty all-inclusive--> Find out more
Festool Dovetail cutter HW S8 D20/26/10° Festool Dovetail cutter HW S8 D20/26/10° 2
Routing

Festool Dovetail cutter HW S8 D20/26/10°

Festool
491165
€62.26
Main areas of useWith the matched system consisting of a router, template and cutter, traditional exposed and blind dovetail joints can be made in no time at allNotefor OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400for open dovetail joint slots, SZO 20Warranty all-inclusive--> Find out more
Festool Ball bearing guide D9,53 (2x)
Routing

Festool Ball bearing guide D9,53 (2x)

Festool
491382
€33.44
Strengths and benefitsRobust and precise metal ball bearingSimple replacement with a screw with hex socketMain areas of useSpare ball bearing for cuttersIn conjunction with an ogee cutter, rod milling grooves can be produced with this ball bearingNotefor HW ogee cutter with ball bearing guideItems includedhexagon socket screwWarranty all-inclusive-->...
Festool Ball bearing guide D12,7 (2x)
Routing

Festool Ball bearing guide D12,7 (2x)

Festool
491383
€18.47
Strengths and benefitsRobust and precise metal ball bearingSimple replacement with a screw with hex socketMain areas of useSpare ball bearing for cuttersNotefor HW S8 D31.7/R4/R4 Roman ogee cutterItems includedhexagon socket screwWarranty all-inclusive--> Find out more
Festool Ball bearing guide D16 (2x)
Routing

Festool Ball bearing guide D16 (2x)

Festool
491384
€31.98
Strengths and benefitsPrecision ball bearingMade of high-quality steelMain areas of useSpare ball bearing for cuttersNotefor cutter spindle for HW disc groove cutter, shank 8 mm, order no. 499805Items includedhexagon socket screwWarranty all-inclusive--> Find out more
Festool Ball bearing guide D19 (2x)
Routing

Festool Ball bearing guide D19 (2x)

Festool
491385
€26.79
Strengths and benefitsPrecision ball bearingMade of high-quality steelMain areas of useSpare ball bearing for cuttersNotefor HW S8 D19/20WM Z2 reversible blade edge trimming cutter, HW S8 D19 12x12 KL OFK reversible blade edge trimming cutterItems includednut M 6Warranty all-inclusive--> Find out more
Festool Replacement blade for cutter HW-WP 20x4,1x1,1 (4x)
Routing

Festool Replacement blade for cutter HW-WP 20x4,1x1,1 (4x)

Festool
491386
€63.93
Strengths and benefitsSpare reversible blades for reversible blade cutterAlways a sharp router due to the reversible blade systemSimple replacement due to supplied T8 TX keyBlade replacement allows the diameter of the router to remain the sameWith two-sided bladeMain areas of use4 spare reversible blades for cutter toolsNotefor cutter 491078Items...
Festool Replacement blade for cutter HW-WP 25x5,5x1,1 (4x)
Routing

Festool Replacement blade for cutter HW-WP 25x5,5x1,1 (4x)

Festool
491387
€67.23
Strengths and benefitsSpare reversible blades for reversible blade cutterAlways a sharp router due to the reversible blade systemSimple replacement due to supplied T8 TX keyBlade replacement allows the diameter of the router to remain the sameWith two-sided bladeMain areas of use4 spare reversible blades for cutter toolsNotefor cutter 491079 (4 pcs)Items...
Festool Replacement blade for cutter HW-WP 30x5,5x1,1 (4x)
Routing

Festool Replacement blade for cutter HW-WP 30x5,5x1,1 (4x)

Festool
491388
€70.56
Strengths and benefitsSpare reversible blades for reversible blade cutterAlways a sharp router due to the reversible blade systemSimple replacement due to supplied T8 TX keyBlade replacement allows the diameter of the router to remain the sameWith two-sided bladeMain areas of use4 spare reversible blades for cutter toolsNotefor cutters 491080, 492715Items...
Festool Reversible blade HM-WP 50x5,5x1,1 (4x)
Routing

Festool Reversible blade HM-WP 50x5,5x1,1 (4x)

Festool
491389
€121.56
Strengths and benefitsAlways a sharp router due to the reversible blade systemSimple replacement due to supplied T8 TX keyBlade replacement allows the diameter of the router to remain the sameWith two-sided bladeMain areas of use4 spare reversible blades for cutter toolsNotefor HW 491110 reversible blade groove cutterItems included3 x sink screw, T8 TX...
Festool Replacement blade for cutter HW-WP 7,6x12x1,5 (4x)
Routing

Festool Replacement blade for cutter HW-WP 7,6x12x1,5 (4x)

Festool
491390
€58.57
Strengths and benefitsAlways a sharp router due to the reversible blade systemSimple replacement due to supplied TX keyMain areas of use4 spare reversible blades for cutter toolsNotefor 492717, 492716, 491081 cuttersfor exchanging the pre-cutters of cutters 492717, 492716, 491081Items includedoval head screw, T15 TX spanner, 4 x reversible bladeWarranty...
Festool Reversible blade HW-WP 12x12x1,5 (4x)
Routing

Festool Reversible blade HW-WP 12x12x1,5 (4x)

Festool
491391
€53.02
Strengths and benefitsSpare reversible blades for all routers with reversible blades of 12 x 12 mmAlways a sharp router due to the reversible blade systemSimple replacement due to supplied T15 TX keyBlade replacement allows the diameter of the router to remain the sameWith two-sided bladeMain areas of use4 spare reversible blades for cutter toolsNotefor...
Festool Reversible blade HW-WP 20x12x1,5 (4x)
Routing

Festool Reversible blade HW-WP 20x12x1,5 (4x)

Festool
491392
€53.02
Strengths and benefitsSpare reversible blades for reversible blade edge trimming cutter 491082Always a sharp router due to the reversible blade systemSimple replacement due to supplied T15 TX keyBlade replacement allows the diameter of the router to remain the sameWith two-sided bladeMain areas of use4 spare reversible blades for cutter toolsNotefor...
Festool Reversible blade HW-WP 30x12x1,5 (4x)
Routing

Festool Reversible blade HW-WP 30x12x1,5 (4x)

Festool
491393
€86.83
Strengths and benefitsSpare reversible blades for reversible blade cutterAlways a sharp router due to the reversible blade systemSimple replacement due to supplied T15 TX keyBlade replacement allows the diameter of the router to remain the sameWith two-sided bladeMain areas of use4 spare reversible blades for cutter toolsNotefor 492716, 492717, 491120...
Festool Ball bearing guide D28 (2x)
Routing

Festool Ball bearing guide D28 (2x)

Festool
491397
€34.75
Strengths and benefitsPrecision ball bearingMade of high-quality steelMain areas of useSpare ball bearing for cuttersNotefor a cutter spindle for disc groove cuttersItems includedoval head screwWarranty all-inclusive--> Find out more
Festool Ball bearing guide D12,7
Routing

Festool Ball bearing guide D12,7

Festool
491398
€24.95
Strengths and benefitsPrecision ball bearingMade of high-quality steelPlastic-coatedMain areas of useReplacement ball bearing for ogee cutter when working on basins made of mineral materialRequired when rounding off angles > 90°Notefor HW R3/D22 ss S12 ogee cutterItems includedfork spanner, A/F 4Warranty all-inclusive--> Find out more
Festool Ball bearing guide D9,5/12,7/16/19/22
Routing

Festool Ball bearing guide D9,5/12,7/16/19/22

Festool
491406
€75.57
Strengths and benefitsDue to the various diameters, different rebate depths of 4.9–14.6 mm, depending on the router, can be routedRobust and precise metal ball bearingSimple replacement with a screw with hex socketMain areas of useSpare ball bearing for cuttersRouting rebates in wooden materialsRouting back panel rebate in furniture constructionRouting...
Festool Ball bearing guide D21-15,88 (2x)
Routing

Festool Ball bearing guide D21-15,88 (2x)

Festool
491408
€65.97
Strengths and benefitsRobust and precise metal ball bearingSimple replacement with M6 nutPlastic-coatedMain areas of useSpare ball bearing for cuttersNotefor HW S12 D21/30WM reversible blade edge trimming cutterItems includednut M 6Warranty all-inclusive--> Find out more
Festool V-groove cutter HW S8 D18-135°/Alu
Routing

Festool V-groove cutter HW S8 D18-135°/Alu

Festool
491443
€86.83
Strengths and benefits135° router for aluminium composite materialsDurable thanks to carbide-tipped cuttingMain areas of useSpecial router for machining aluminium composite materialsA groove of 135° is routed with this routerNotefor routersWarranty all-inclusive--> Find out more
Festool V-groove cutter HW S8 D18-90°/Alu
Routing

Festool V-groove cutter HW S8 D18-90°/Alu

Festool
491444
€86.83
Strengths and benefits90° router for aluminium composite materialsDurable thanks to carbide-tipped cuttingMain areas of useSpecial router for machining aluminium composite materialsA groove of 90° is routed with this routerNotefor routersWarranty all-inclusive--> Find out more
Festool V-groove cutter HW 118x14-90°/Alu Festool V-groove cutter HW 118x14-90°/Alu 2
Routing

Festool V-groove cutter HW 118x14-90°/Alu

Festool
491470
€462.76
Perfect grooves in aluminium.Strengths and benefitsGroove cutter for easy grooving in aluminium composite panelsExtremely long service life due to carbide cuttingPerfectly tailored to the feeler roller appropriate to the material thicknessVery fast work progress without burr formationMain areas of useFor creating grooves in aluminium composite panels, in...
Festool V-groove cutter HW 118x18-135°/Alu Festool V-groove cutter HW 118x18-135°/Alu 2
Routing

Festool V-groove cutter HW 118x18-135°/Alu

Festool
491471
€523.00
Perfect grooves in aluminium.Strengths and benefitsGroove cutter for easy grooving in aluminium composite panelsExtremely long service life due to carbide cuttingPerfectly tailored to the feeler roller appropriate to the material thicknessVery fast work progress without burr formationMain areas of useFor creating grooves in aluminium composite panels, in...
Festool Chamfer cutter HW 60°-OFK 500
Routing

Festool Chamfer cutter HW 60°-OFK 500

Festool
491533
€67.43
Strengths and benefitsSpecial cutter for chamfering of edgesLong service life thanks to carbide bladesMain areas of useFor chamfer milling plastic or solid wood edgingChamfering of solid wood panelsChamfering of framesNotefor OFK 500, OFKC 500without bearing balleasy installation with a screwWarranty all-inclusive--> Find out more
Festool Follower roll A3 Festool Follower roll A3 2
Routing

Festool Follower roll A3

Festool
491538
€48.59
Routing depths precisely defined.Strengths and benefitsFor determining the exact routing depth for aluminium composite panelsNo ghost lines on the material due to special bearingMain areas of useRouting depths are precisely definedSensor rollers can easily be replacedNotefor aluminium composite milling machine for A3 aluminium composite panelsexactly...
Festool Follower roll A4 Festool Follower roll A4 2
Routing

Festool Follower roll A4

Festool
491539
€48.59
Routing depths precisely defined.Strengths and benefitsFor determining the exact routing depth for aluminium composite panelsNo ghost lines on the material due to special bearingMain areas of useRouting depths are precisely definedSensor rollers can easily be replacedNotefor aluminium composite milling machine for A4 aluminium composite panelsexactly...
Festool Follower roll A6 Festool Follower roll A6 2
Routing

Festool Follower roll A6

Festool
491540
€48.59
Routing depths precisely defined.Strengths and benefitsFor determining the exact routing depth for aluminium composite panelsNo ghost lines on the material due to special bearingMain areas of useRouting depths are precisely definedSensor rollers can easily be replacedNotefor aluminium composite milling machine for A6 aluminium composite panelsexactly...
Festool Follower roll D2 Festool Follower roll D2 2
Routing

Festool Follower roll D2

Festool
491542
€48.59
Routing depths precisely defined.Strengths and benefitsFor determining the exact routing depth for aluminium composite panelsNo ghost lines on the material due to special bearingMain areas of useRouting depths are precisely definedSensor rollers can easily be replacedNotefor aluminium composite milling machine for D2 aluminium composite panelsexactly...
Festool Follower roll D3 Festool Follower roll D3 2
Routing

Festool Follower roll D3

Festool
491543
€48.59
Routing depths precisely defined.Strengths and benefitsFor determining the exact routing depth for aluminium composite panelsNo ghost lines on the material due to special bearingMain areas of useRouting depths are precisely definedSensor rollers can easily be replacedNotefor aluminium composite milling machine for D3 aluminium composite panelsexactly...
Festool Follower roll D4 Festool Follower roll D4 2
Routing

Festool Follower roll D4

Festool
491544
€48.59
Routing depths precisely defined.Strengths and benefitsFor determining the exact routing depth for aluminium composite panelsNo ghost lines on the material due to special bearingMain areas of useRouting depths are precisely definedSensor rollers can easily be replacedNotefor aluminium composite milling machine for D4 aluminium composite panelsexactly...
Festool Follower roll D6 Festool Follower roll D6 2
Routing

Festool Follower roll D6

Festool
491545
€48.59
Routing depths precisely defined.Strengths and benefitsFor determining the exact routing depth for aluminium composite panelsNo ghost lines on the material due to special bearingMain areas of useRouting depths are precisely definedSensor rollers can easily be replacedNotefor aluminium composite milling machine for D6 aluminium composite panelsexactly...
Festool Guide rail FS 2424/2-LR 32 Festool Guide rail FS 2424/2-LR 32 2
Routing

Festool Guide rail FS 2424/2-LR 32

Festool
491622
€433.03
Impeccable guidance.Strengths and benefitsThe hole line distance of 32 mm allows for quick and precise routing of hole lines in furniture manufacturingMain areas of useFor preparing holes series with 32 mm spacing with hole series accessoriesSafe, perfectly straight power tool guidanceSplinterguard for splinter-free sawingCan be properly positioned even...
Festool Groove cutter HW S8 D8/30
Routing

Festool Groove cutter HW S8 D8/30

Festool
491647
€54.33
Strengths and benefitsThe base blade allows plunge-cutting of the cutter into the workpieceLong service lives are achieved thanks to the solid carbide designPerfectly suited to a multitude of materialsMain areas of useMore security against small diameter bits breaking because of the low vibration all tungsten carbide cutter designThe partially ground...
Festool Groove cutter HW S8 D10/30
Routing

Festool Groove cutter HW S8 D10/30

Festool
491648
€47.31
Strengths and benefitsLong router bit service life even for plunge cutting because of the soldered standard tungsten carbide bladeAn optimal cutter geometry, a stable cutter shaft and the proper sharpness ensure flawless surfacesMain areas of useGrooves in furniture manufacturingRouting fittingsRebating of solid wood and panel materialWorking with...
Festool Groove cutter HW S8 D12/30 Festool Groove cutter HW S8 D12/30 2
Routing

Festool Groove cutter HW S8 D12/30

Festool
491649
€49.89
Strengths and benefitsLong router bit service life even for plunge cutting because of the soldered standard tungsten carbide bladeAn optimal cutter geometry, a stable cutter shaft and the proper sharpness ensure flawless surfacesMain areas of useGrooves in furniture manufacturingRouting fittingsRebating of solid wood and panel materialWorking with...
Festool Edge trimming cutter HW D 19/16 S8 OFK 700 Festool Edge trimming cutter HW D 19/16 S8 OFK 700 2
Routing

Festool Edge trimming cutter HW D 19/16 S8 OFK 700

Festool
491666
€52.67
Strengths and benefitsSpecial cutter for flush trimming of edgesThe carbide blades have a very long service life and can also be resharpenedMain areas of useSpecial, short cylinder cutter for flush trimming edges, for use with the OFK/MFK 700Notefor OF 1010, OF 1010 R, OFK 700, MFK 700, MFKC 700for flush trimming of edgescarbide bladesfor edges up to 15...
Festool Copying ring KR-D 8,5/OF 1400 Festool Copying ring KR-D 8,5/OF 1400 2
Routing

Festool Copying ring KR-D 8,5/OF 1400

Festool
492179
€25.34
Main areas of useFor gauging routing templates, inserted in router without using toolsNotefor OF 1400 / VS 600appropriate for the SZO 14 Z template of the VS 600 jointing systemappropriate for the FZ 6 template of the VS 600 jointing systemself-centringmounted without using toolsWarranty all-inclusive--> Find out more
Festool Copying ring KR-D 13,8/OF 1400 Festool Copying ring KR-D 13,8/OF 1400 2
Routing

Festool Copying ring KR-D 13,8/OF 1400

Festool
492180
€25.34
Strengths and benefitsA perfect system with the templates for box joints or open dovetail jointsMain areas of useCopying ring for jointing system VS 600, inserted in router without using toolsNotefor OF 1400 / VS 600appropriate for the SZO 20 template of the VS 600 jointing systemappropriate for the FZ 10 template of the VS 600 jointing systemappropriate...
Festool Copying ring KR-D 17,0/OF 1400 Festool Copying ring KR-D 17,0/OF 1400 2
Routing

Festool Copying ring KR-D 17,0/OF 1400

Festool
492181
€25.34
Strengths and benefitsA perfect system with the templates for semi-covered or open dovetail jointMain areas of useCopying ring for jointing system VS 600, inserted in router without using toolsNotefor OF 1400 / VS 600appropriate for the SZ 14 and SZO 14 templates of the VS 600 jointing systemself-centringmounted without using toolsWarranty...
Festool Copying ring KR-D 24,0/OF 1400 Festool Copying ring KR-D 24,0/OF 1400 2
Routing

Festool Copying ring KR-D 24,0/OF 1400

Festool
492182
€25.34
Strengths and benefitsA perfect system with the templates for semi-covered or open dovetail jointMain areas of useCopying ring for jointing system VS 600, inserted in router without using toolsNotefor OF 1400 / VS 600appropriate for the SZ 20 and SZO 20 templates of the VS 600 jointing systemself-centringmounted without using toolsWarranty...
Festool Copying ring KR-D 27,0/OF 1400 Festool Copying ring KR-D 27,0/OF 1400 2
Routing

Festool Copying ring KR-D 27,0/OF 1400

Festool
492184
€25.34
Strengths and benefitsThe copying ring can be used without toolsIt is self-centring thanks to the conical holder on the OF 1400Main areas of useFor gauging routing templates, inserted in router without using toolsNotefor OF 1400suitable for cutters up to 22 mm in diameterWarranty all-inclusive--> Find out more
Festool Copying ring KR-D 30,0/OF 1400 Festool Copying ring KR-D 30,0/OF 1400 2
Routing

Festool Copying ring KR-D 30,0/OF 1400

Festool
492185
€25.34
Strengths and benefitsThe copying ring can be used without toolsIt is self-centring thanks to the conical holder on the OF 1400Main areas of useFor gauging routing templates, inserted in router without using toolsNotefor OF 1400suitable for cutters up to 25 mm in diameterWarranty all-inclusive--> Find out more
Festool Copying ring KR-D 40,0/OF 1400 Festool Copying ring KR-D 40,0/OF 1400 2
Routing

Festool Copying ring KR-D 40,0/OF 1400

Festool
492186
€25.34
Strengths and benefitsThe copying ring can be used without toolsIt is self-centring thanks to the conical holder on the OF 1400Main areas of useFor gauging routing templates, inserted in router without using toolsNotefor OF 1400suitable for cutters up to 35 mm in diameterWarranty all-inclusive--> Find out more
Festool Base runner LA-OF 1400
Routing

Festool Base runner LA-OF 1400

Festool
492574
€40.83
Strengths and benefitsSecure support thanks to simple clip systemHard fibre base runner enables the best sliding propertiesPerfect working without tipping over thanks to small centre holeMain areas of useRouting in the edge area and cornersNotefor OF 1400hard-fibre base runner with 20 mm centre borereduces the opening of the router to the cutter...
Festool Dust extraction attachment AH-OF 1400 Festool Dust extraction attachment AH-OF 1400 2
Routing

Festool Dust extraction attachment AH-OF 1400

Festool
492585
€52.84
Strengths and benefitsSecure mounting via the OF guide rodsExtracts the chips from where they are producedFree view of the work area thanks to transparent plasticThe connecting sleeve is suitable for a suction hose of 27 mm in diameterNotefor OF 1400for sideway extractionfor jointing system VS 500 / VS 600 and for edge trimmingWarranty all-inclusive-->...
Festool Guide rail adapter FS-OF 1400 Festool Guide rail adapter FS-OF 1400 2
Routing

Festool Guide rail adapter FS-OF 1400

Festool
492601
€83.33
Precise guiding.Strengths and benefitsThe distance from the guide rail can be set precisely to a tenth of a millimetre with the fine adjustment wheelPerfect guidance on the guide rail through fine adjustment of the guide playAdditional handle on the adapter to enable safe handlingIs installed using the rods from the items included with the routerThe...
Festool Routing template MFS 400 Festool Routing template MFS 400 2
Routing

Festool Routing template MFS 400

Festool
492610
€391.83
The template with all the options.Strengths and benefitsScale on the profiles accurate to the millimetre for absolute precision when making cut-outs and curvesAligned exactly with the workpiece – via the angle stopsSecured quickly – workpiece secured in prefabricated groove for fastening and lever clampsOption of systematic extension – with table...
Festool Routing template MFS 700 Festool Routing template MFS 700 2
Routing

Festool Routing template MFS 700

Festool
492611
€612.56
The template with all the options.Strengths and benefitsScale on the profiles accurate to the millimetre for absolute precision when making cut-outs and curvesAligned exactly with the workpiece – via the angle stopsSecured quickly – workpiece secured in prefabricated groove for fastening and lever clampsOption of systematic extension – with table...
Festool Parallel side fence SA-OF 1400 Festool Parallel side fence SA-OF 1400 2
Routing

Festool Parallel side fence SA-OF 1400

Festool
492636
€63.01
Strengths and benefitsThe parallel side fence enables parallel working on an edgeExact readjusting is possible via fine adjustmentThe additional extraction hood allows a hose connection underneath the parallel side fenceMain areas of useRouting parallel to the workpiece edgeNotefor OF 1400With fine adjustment and extraction hoodwithout rodsWarranty...
Festool Plane cutter HW D 52/R1ss S12
Routing

Festool Plane cutter HW D 52/R1ss S12

Festool
492701
€127.09
Strengths and benefitsThanks to the diameter of 52 mm and the three HW carbide blades, this plane cutter also allows large surfaces to be processedThe 12 mm shank thus ensures stable workingMain areas of useUsing the facing cutter, jutting edges can be trimmed flush without any problem, e.g., strip insertsNotefor the OF 1400, OF 2000, OF 2200HW...
Festool Groove cutter with reversible blades HW D16/30 S8
Routing

Festool Groove cutter with reversible blades HW D16/30 S8

Festool
492716
€154.27
Strengths and benefitsRemovable blades allow working with constant cutter dimensions and high precision – optimal when templates are usedNo re-sharpening, can be used again immediatelyThe blade length of 25 mm also enables routing of deeper groovesMain areas of useRouting templatesGrooves in wood and wood materialsNotefor OF 900, OF 1000, OF 1010, OF 1010...
Festool Extension profile MFS-VP 200 Festool Extension profile MFS-VP 200 2
Routing

Festool Extension profile MFS-VP 200

Festool
492722
€145.75
Precision goes into the extension.Strengths and benefitsExtension profile for extending the MFS 400 and MFS 700 multi-routing templatesA scale on the profile which is accurate to the millimetre makes it possible to work with complete precisionEasy to join thanks to the slot nutsFestool fastening clamps and lever clamps for fixing can be pushed into the...
Festool Extension profile MFS-VP 400 Festool Extension profile MFS-VP 400 2
Routing

Festool Extension profile MFS-VP 400

Festool
492723
€170.32
Precision goes into the extension.Strengths and benefitsExtension profile for extending the MFS 400 and MFS 700 multi-routing templatesA scale on the profile which is accurate to the millimetre makes it possible to work with complete precisionEasy to join thanks to the slot nutsFestool fastening clamps and lever clamps for fixing can be pushed into the...
Festool Extension profile MFS-VP 700
Routing

Festool Extension profile MFS-VP 700

Festool
492724
€300.55
Precision goes into the extension.Strengths and benefitsExtension profile for extending the MFS 400 and MFS 700 multi-routing templatesA scale on the profile which is accurate to the millimetre makes it possible to work with complete precisionEasy to join thanks to the slot nutsFestool fastening clamps and lever clamps for fixing can be pushed into the...
Festool Extension profile MFS-VP 1000
Routing

Festool Extension profile MFS-VP 1000

Festool
492725
€357.45
Precision goes into the extension.Strengths and benefitsExtension profile for extending the MFS 400 and MFS 700 multi-routing templatesA scale on the profile which is accurate to the millimetre makes it possible to work with complete precisionEasy to join thanks to the slot nutsFestool fastening clamps and lever clamps for fixing can be pushed into the...
Festool Extension profile MFS-VP 2000
Routing

Festool Extension profile MFS-VP 2000

Festool
492726
€443.54
Precision goes into the extension.Strengths and benefitsExtension profile for extending the MFS 400 and MFS 700 multi-routing templatesA scale on the profile which is accurate to the millimetre makes it possible to work with complete precisionEasy to join thanks to the slot nutsFestool fastening clamps and lever clamps for fixing can be pushed into the...
Festool Chip deflector KSF-OF 1400
Routing

Festool Chip deflector KSF-OF 1400

Festool
492732
€26.06
Strengths and benefitsEasy to clip in without toolsCan be rotated by 360°, therefore can also be used on curved edgesMain areas of useFor routing work in the edge zoneNotefor OF 1400for sideway extractionWarranty all-inclusive--> Find out more
Festool Ball bearing guide D19
Routing

Festool Ball bearing guide D19

Festool
493055
€31.42
Strengths and benefitsPrecision ball bearingMade of high-quality steelPlastic-coatedMain areas of useReplacement ball bearing for edge trimming cutter for processing mineral materialNotefor HW edge trimming cutter with lower ball bearing, shank 12 mm, order no. 492661Warranty all-inclusive--> Find out more
Festool Ball bearing guide D22/11°
Routing

Festool Ball bearing guide D22/11°

Festool
493056
€36.03
Strengths and benefitsPrecision ball bearingMade of high-quality steelPlastic-coatedMain areas of useReplacement ball bearing for edge trimming cutter for processing mineral material. The thrust surface is slanted by 11°Notefor HW edge trimming cutter with lower ball bearing, shank 12 mm, order no. 492661Warranty all-inclusive--> Find out more
Festool Ball bearing guide D21,1/6°
Routing

Festool Ball bearing guide D21,1/6°

Festool
493061
€34.55
Strengths and benefitsReplacement ball bearing guide for the HW R6.35/25/6° ss S12 basin cutterRobust and precise metal ball bearingEasy to changePlastic-coated thus also suitable for mineral materialsMain areas of useSpare ball bearing for cuttersNotefor pelvic cutter 6° (492671)thrust surface slanted by 6°suitable for mineral materialsWarranty...
Festool Chip deflector KSF-OF 1010 Festool Chip deflector KSF-OF 1010 2
Routing

Festool Chip deflector KSF-OF 1010

Festool
493180
€26.43
The perfect combination for clean work.Strengths and benefitsThere are no traces on the surface of the workpiece due to the plasticCan be rotated by 360°, therefore can also be used on curved edgesEasily, quickly and securely installed with two screwsMain areas of useMilling grooves in the edge area, in order to achieve optimal extractionNotefor OF 900,...
Festool Base runner LAS-OF 1400
Routing

Festool Base runner LAS-OF 1400

Festool
493233
€147.99
Strengths and benefitsThe LAS-OF 1400 base runner also includes a chip deflector that is held by three magnetsThe chip deflector can also be rotated by 360°, which is a great advantage for processing with contoured parts or when working at a cornerMain areas of useRouting in the edge areaNotefor OF 1400for sideway extractionrunning pad with support...
Festool Groove cutter HW S12 D13,2/35 PLANET
Routing

Festool Groove cutter HW S12 D13,2/35 PLANET

Festool
493789
€101.96
Strengths and benefitsHigh durability of the cutter even when plunge-cutting, thanks to soldered carbide base bladeTogether with the routing aids, automatic door seals can be routed on the frontMain areas of useRouting "PLANET" door seals in apartment entrance doorsNotefor the OF 1400, OF 2000, OF 2200for automatic door seal, “PLANET”Warranty...
Festool Groove cutter HW S12 D15/35 SCHALL-EX
Routing

Festool Groove cutter HW S12 D15/35 SCHALL-EX

Festool
493790
€114.55
Strengths and benefitsHigh durability of the cutter even when plunge-cutting, thanks to soldered carbide base bladeTogether with the routing aids, automatic door seals can be routed on the frontMain areas of useRouting "SCHALL-EX" door sealsNotefor the OF 1400, OF 2000, OF 2200for automatic door seal, “SCHALL-EX”Warranty all-inclusive--> Find out more
Festool Guide plate FP-LR 32 Festool Guide plate FP-LR 32 2
Routing

Festool Guide plate FP-LR 32

Festool
494340
€202.08
Holes in series.Strengths and benefitsWith the LR 32 system – comprising the guide rail FS 1400/2-LR 32 or FS 2424/2-LR 32 and the hole drilling system – precise rows of holes spaced 32 mm apart can be drilled with the Festool routerThe LR 32 set can be supplemented with this additional guide plate, if for instance a second router with a different drill...
Festool Collet SZ-D 8,0/OF 1400/2000/2200
Routing

Festool Collet SZ-D 8,0/OF 1400/2000/2200

Festool
494460
€72.60
Strengths and benefitsNo dust penetrates thanks to the closed housing of the union nutThe precise collet holds the cutter securely in the desired positionMain areas of useDustproof clamping collets for routers OF 1400 and OF 2200Open-ended spanner width 24 mmNotefor the OF 1400, OF 2000, OF 2200for router shank Ø 8 mmdustproof clamping colletsopen-ended...
Festool Collet SZ-D 10,0/OF 1400/2000/2200
Routing

Festool Collet SZ-D 10,0/OF 1400/2000/2200

Festool
494461
€72.60
Strengths and benefitsNo dust penetrates thanks to the closed housing of the union nutThe precise collet holds the cutter securely in the desired positionMain areas of useDustproof clamping collets for routers OF 1400 and OF 2200Open-ended spanner width 24 mmNotefor the OF 1400, OF 2000, OF 2200for cutter shank Ø 10 mmdustproof clamping colletsopen-ended...
Festool Collet SZ-D 12,0/OF 1400/2000/2200
Routing

Festool Collet SZ-D 12,0/OF 1400/2000/2200

Festool
494462
€72.60
Strengths and benefitsNo dust penetrates thanks to the closed housing of the union nutThe precise collet holds the cutter securely in the desired positionMain areas of useDustproof clamping collets for routers OF 1400 and OF 2200Open-ended spanner width 24 mmNotefor the OF 1400, OF 2000, OF 2200for cutter shank Ø 12 mmdustproof clamping colletsopen-ended...
Festool Collet SZ-D 6,35/OF 1400/2000/2200
Routing

Festool Collet SZ-D 6,35/OF 1400/2000/2200

Festool
494463
€72.60
Strengths and benefitsNo dust penetrates thanks to the closed housing of the union nutThe precise collet holds the cutter securely in the desired positionMain areas of useDustproof clamping collets for routers OF 1400 and OF 2200Open-ended spanner width 24 mmNotefor the OF 1400, OF 2000, OF 2200for router shaft 6.35 mmdustproof clamping colletsopen-ended...
Festool Collet SZ-D 12,7/OF 1400/2000/2200
Routing

Festool Collet SZ-D 12,7/OF 1400/2000/2200

Festool
494465
€72.60
Strengths and benefitsNo dust penetrates thanks to the closed housing of the union nutThe precise collet holds the cutter securely in the desired positionMain areas of useDustproof clamping collets for routers OF 1400 and OF 2200Open-ended spanner width 24 mmNotefor the OF 1400, OF 2000, OF 2200for router shaft Ø 12.7 mmdustproof clamping...
Festool Copying ring KR-D 17,0/OF 2200 Festool Copying ring KR-D 17,0/OF 2200 2
Routing

Festool Copying ring KR-D 17,0/OF 2200

Festool
494622
€23.83
Strengths and benefitsThe copying ring can be used without toolsIt is self-centring thanks to the conical holder on the OF 2200Main areas of useFor gauging routing templatesNotefor OF 2200suitable for cutters up to 12 mm in diameterWarranty all-inclusive--> Find out more
Festool Copying ring KR-D 24,0/OF 2200 Festool Copying ring KR-D 24,0/OF 2200 2
Routing

Festool Copying ring KR-D 24,0/OF 2200

Festool
494623
€23.83
Strengths and benefitsThe copying ring can be used without toolsIt is self-centring thanks to the conical holder on the OF 2200Main areas of useFor gauging routing templates, inserted in router without using toolsNotefor OF 2200suitable for cutters up to 19 mm in diameterWarranty all-inclusive--> Find out more
Festool Copying ring KR-D 27,0/OF 2200 Festool Copying ring KR-D 27,0/OF 2200 2
Routing

Festool Copying ring KR-D 27,0/OF 2200

Festool
494624
€23.83
Strengths and benefitsThe copying ring can be used without toolsIt is self-centring thanks to the conical holder on the OF 2200Main areas of useFor gauging routing templates, inserted in router without using toolsNotefor OF 2200suitable for cutters up to 22 mm in diameterWarranty all-inclusive--> Find out more
Festool Copying ring KR-D 30,0/OF 2200 Festool Copying ring KR-D 30,0/OF 2200 2
Routing

Festool Copying ring KR-D 30,0/OF 2200

Festool
494625
€23.83
Strengths and benefitsThe copying ring can be used without toolsIt is self-centring thanks to the conical holder on the OF 2200Main areas of useFor gauging routing templates, inserted in router without using toolsNotefor OF 2200suitable for cutters up to 25 mm in diameterWarranty all-inclusive--> Find out more
Festool Copying ring KR-D 40,0/OF 2200 Festool Copying ring KR-D 40,0/OF 2200 2
Routing

Festool Copying ring KR-D 40,0/OF 2200

Festool
494626
€23.83
Strengths and benefitsThe copying ring can be used without toolsIt is self-centring thanks to the conical holder on the OF 2200Main areas of useFor gauging routing templates, inserted in router without using toolsNotefor OF 2200suitable for cutters up to 35 mm in diameterWarranty all-inclusive--> Find out more
Festool Adapter KRA-ZOLL/OF 2200
Routing

Festool Adapter KRA-ZOLL/OF 2200

Festool
494627
€16.46
Strengths and benefitsThe copying ring adapter can be used without toolsIt is self-centring thanks to the conical holder on the OF 2200Main areas of useHolding screwable imperial copying ringsNotefor OF 2200adapter for imperial copying ringsWarranty all-inclusive--> Find out more
Festool Chip deflector KSF-OF 2200 Festool Chip deflector KSF-OF 2200 2
Routing

Festool Chip deflector KSF-OF 2200

Festool
494670
€54.33
Strengths and benefitsEasy to clip in without toolsCan be rotated by 360°, therefore can also be used on curved edgesMain areas of useRouting in the edge areaNotefor OF 2200for sideway extractionWarranty all-inclusive--> Find out more
Festool Base runner LA-OF 2200 D36 CT Festool Base runner LA-OF 2200 D36 CT 2
Routing

Festool Base runner LA-OF 2200 D36 CT

Festool
494675
€75.57
Strengths and benefitsBase runner specially for copying ringsThe openings enable optimal extractionThe webs ensure high stability without the router tipping overMain areas of useMilling grooves with copying ringNotefor OF 2200for copying rings D 12.7–36 mmWith openings for optimised extractionWarranty all-inclusive--> Find out more
Festool Base runner LA-OF 2200 D36 Festool Base runner LA-OF 2200 D36 2
Routing

Festool Base runner LA-OF 2200 D36

Festool
494677
€75.57
Strengths and benefitsSecure support thanks to simple clip systemHard fibre base runner enables the best sliding propertiesPerfect working without tipping over thanks to small centre holeMain areas of useRouting in the edge areaNotefor OF 2200reduces the opening of the router to the cutter diameterWarranty all-inclusive--> Find out more
Festool Parallel side fence SA-OF 2200 Festool Parallel side fence SA-OF 2200 2
Routing

Festool Parallel side fence SA-OF 2200

Festool
494680
€137.46
Strengths and benefitsThe parallel side fence enables parallel working on an edgeExact readjusting is possible via fine adjustmentThe additional extraction hood allows a hose connection underneath the parallel side fenceMain areas of useRouting parallel to the workpiece edgeNotefor OF 2200With fine adjustment and extraction hoodWithout guide rods ST-OF...
Festool Guide rail adapter FS-OF 2200 Festool Guide rail adapter FS-OF 2200 2
Routing

Festool Guide rail adapter FS-OF 2200

Festool
494681
€162.93
Precise guiding.Strengths and benefitsThe distance from the guide rail can be set precisely to a tenth of a millimetre with the fine adjustment wheelPerfect guidance on the guide rail through fine adjustment of the guide playAdditional handle on the adapter to enable safe handlingIs installed using the rods from the items included with the routerThe...
Festool Support AFB-OF 2200 Festool Support AFB-OF 2200 2
Routing

Festool Support AFB-OF 2200

Festool
494682
€90.33
Strengths and benefitsEasy to switch thanks to the toolless clip systemEnlarges the router support and enables even more reliable guidanceMain areas of useSecure support when processing edgesNotefor OF 2200support widener for safe guidance of the router at workpiece edgesWarranty all-inclusive--> Find out more
Festool Router table FT-MFK 700 1,5° Set Festool Router table FT-MFK 700 1,5° Set 2
Routing

Festool Router table FT-MFK 700 1,5° Set

Festool
495165
€222.98
Strengths and benefitsThe router table can be positioned both horizontally and vertically on the MFK/OFK 700Reliable guidance of the machine is possible thanks to the large bearing surfaceMain areas of use1.5° router base for flush trimming edge veneerNotefor MFK/OFK 700, MFKC 700low-dust routing thanks to extraction hoodItems includedtarnishing pad,...
Festool Routing aid OF-FH 2200 Festool Routing aid OF-FH 2200 2
Routing

Festool Routing aid OF-FH 2200

Festool
495246
€289.47
Safe, precise routing of seal slotsStrengths and benefitsFor secure guidance of the Festool router along narrow workpiece edgesSide stops can be adjusted 60 mm on both sides with long guidance areasHigh-quality cutter device made from sturdy and solid acrylic glassUsed, for example, for the reliable milling of automatic door sealsMain areas of useGuiding...
Festool Rod ST-OF 2200/2 Festool Rod ST-OF 2200/2 2
Routing

Festool Rod ST-OF 2200/2

Festool
495247
€27.52
Strengths and benefitsGuide rods for joining the parallel side fence and guide rail adapter with the routerThe length allows the stop a large adjustment rangeMain areas of useRouting parallel to the workpiece edgeNotefor OF 2200guide rods for side and guide stops 2 piecesWarranty all-inclusive--> Find out more
Festool Copying ring KR-D 12,7/OF 2200 Festool Copying ring KR-D 12,7/OF 2200 2
Routing

Festool Copying ring KR-D 12,7/OF 2200

Festool
495339
€23.83
Strengths and benefitsThe copying ring can be used without toolsIt is self-centring thanks to the conical holder on the OF 2200Main areas of useFor gauging routing templates, inserted in router without using toolsNotefor OF 2200size of copying ring in inchesWarranty all-inclusive--> Find out more
Festool Copying ring KR-D 19,05/OF 2200 Festool Copying ring KR-D 19,05/OF 2200 2
Routing

Festool Copying ring KR-D 19,05/OF 2200

Festool
495340
€23.83
Strengths and benefitsThe copying ring can be used without toolsIt is self-centring thanks to the conical holder on the OF 2200Main areas of useFor gauging routing templates, inserted in router without using toolsNotefor OF 2200size of copying ring in inchesWarranty all-inclusive--> Find out more
Festool Copying ring KR-D 25,4/OF 2200 Festool Copying ring KR-D 25,4/OF 2200 2
Routing

Festool Copying ring KR-D 25,4/OF 2200

Festool
495341
€23.83
Strengths and benefitsThe copying ring can be used without toolsIt is self-centring thanks to the conical holder on the OF 2200Main areas of useFor gauging routing templates, inserted in router without using toolsNotefor OF 2200size of copying ring in inchesWarranty all-inclusive--> Find out more
Festool Copying ring KR-D 34,93/OF 2200 Festool Copying ring KR-D 34,93/OF 2200 2
Routing

Festool Copying ring KR-D 34,93/OF 2200

Festool
495342
€23.83
Strengths and benefitsThe copying ring can be used without toolsIt is self-centring thanks to the conical holder on the OF 2200Main areas of useFor gauging routing templates, inserted in router without using toolsNotefor OF 2200size of copying ring in inchesWarranty all-inclusive--> Find out more
Festool Router carriage MFS-FS
Routing

Festool Router carriage MFS-FS

Festool
495648
€219.83
Strengths and benefitsSturdy U-profile made of steel for holding a routerEasy adjusting thanks to clamping leverMain areas of useAccessories for the MFS multi-routing template for large cut-outs in panels, e.g. leather inlayNotefor MFS 400, MFS 700suitable for all routers with 30 mm copying ringeasily attachablefor large-surface routingWarranty...
Festool Stopper LA-LR 32 FS Festool Stopper LA-LR 32 FS 2
Routing

Festool Stopper LA-LR 32 FS

Festool
496938
€62.45
Holes in series.Strengths and benefitsThe three standard edge clearances of 9.5, 16 and 32 mm can be set with repeat accuracy when installing the stopper on the hole series guide railThe LR 32 set can be supplemented with these additional stoppers, if for instance a second guide rail with a different measurement should be preparedVery precise production...
Festool Guide rail FS 1400/2-LR 32 Festool Guide rail FS 1400/2-LR 32 2
Routing

Festool Guide rail FS 1400/2-LR 32

Festool
496939
€177.90
Impeccable guidance.Strengths and benefitsThe hole line distance of 32 mm allows for quick and precise routing of hole lines in furniture manufacturingMain areas of useFor preparing holes series with 32 mm spacing with hole series accessoriesSafe, perfectly straight power tool guidanceSplinterguard for splinter-free sawingCan be properly positioned even...
Festool Copying ring KR-D 30,0/21,5/OF 2200 Festool Copying ring KR-D 30,0/21,5/OF 2200 2
Routing

Festool Copying ring KR-D 30,0/21,5/OF 2200

Festool
497453
€41.94
Strengths and benefitsSpecial copying ring for particularly long cuttersMain areas of useRouting templatesNotefor OF 2200extra long safety copying ring D30, 21 mm high, required for use of reversible blade cutters 497455 and 497456Warranty all-inclusive--> Find out more
Festool Groove cutter with reversible blades HW S12 D16/50 WP
Routing

Festool Groove cutter with reversible blades HW S12 D16/50 WP

Festool
497454
€271.36
Strengths and benefitsEasy to switch the reversible bladesExact routing resultsMain areas of useExtra long reversible blade cutter for routing hinge recesses in door frames and door leavesNotefor OF 1400, OF 2200for template routingWarranty all-inclusive--> Find out more
Festool Reversible blade Wepla Set D 16 2+2
Routing

Festool Reversible blade Wepla Set D 16 2+2

Festool
497458
€60.22
Strengths and benefitsAlways a sharp router due to the reversible blade systemSimple replacement due to supplied TX keyNotefor HW S12 D16/50 WP reversible blade groove cutterspare reversible blades set for cutter 497454Items includedtwo reversible blades 50 x 12, two reversible blades 7.6 x 12, TX screws and TX spannersWarranty all-inclusive--> Find...
Festool Reversible blade Wepla Set D 20 2+2
Routing

Festool Reversible blade Wepla Set D 20 2+2

Festool
497568
€66.44
Strengths and benefitsAlways a sharp router due to the reversible blade systemSimple replacement due to supplied TX keyNotefor HW S12 D20/50 WP reversible blade groove cutterspare reversible blade set for cutter 497455Items includedtwo reversible blades 50 x 12, two reversible blades 9 x 12, TX screws and TX spannersWarranty all-inclusive--> Find out more
Festool Reversible blade Wepla Set D 24 2+2
Routing

Festool Reversible blade Wepla Set D 24 2+2

Festool
497569
€61.65
Strengths and benefitsAlways a sharp router due to the reversible blade systemSimple replacement due to supplied TX keyNotefor HW S12 D24/50 WP reversible blade groove cutterspare reversible blades set for cutter 497456Items includedtwo reversible blades 50 x 12, two 12 x 12 reversible blades, TX screws and TX spannersWarranty all-inclusive--> Find out...
Festool Router bit box Box-OF HW S8 Mix Festool Router bit box Box-OF HW S8 Mix 2
Routing

Festool Router bit box Box-OF HW S8 Mix

Festool
498979
€319.20
Cutters for any task.Strengths and benefitsTen cutters securely stored in a clearly organised wayEach individual cutter can be easily removedMain areas of useProfiling of wooden partsCreating groovesRounding off edgesNotefor all routerscarbide-tipped cutters8 mm shanksometimes with ball bearing guideItems includededge trimming cutter HW D12.7/NL25 KL...
Festool Roundover cutter S8 HW R3 D22-KL OFK
Routing

Festool Roundover cutter S8 HW R3 D22-KL OFK

Festool
499797
€80.54
Strengths and benefitsThe cutter is supplied with a sturdy steel ball bearingMain areas of useEdge-trimming cutter for 3 mm edges with 10° transitionNotefor OF 1010, OF 1010 R, OFK 700, MFK 700, MFKC 700optimised bearing mount suitable for 12.7 mm ball bearing guide or no ball bearing guideWarranty all-inclusive--> Find out more
Festool Roundover cutter S8 HW R2 D20-KL OFK
Routing

Festool Roundover cutter S8 HW R2 D20-KL OFK

Festool
499798
€79.45
Strengths and benefitsThe cutter is supplied with a sturdy steel ball bearingMain areas of useEdge-trimming cutter for 2 mm edges with 10° transitionNotefor OF 1010, OF 1010 R, OFK 700, MFK 700, MFKC 700optimised bearing mount suitable for 12.7 mm ball bearing guide or no ball bearing guideWarranty all-inclusive--> Find out more
Festool Chamfer cutter S8 HW 45° D26-KL OFK Festool Chamfer cutter S8 HW 45° D26-KL OFK 2
Routing

Festool Chamfer cutter S8 HW 45° D26-KL OFK

Festool
499799
€74.26
Strengths and benefitsThe cutter is supplied with a sturdy steel ball bearingMain areas of useChamfer cutter 45° for edge trimmingNotefor OF 1010, OF 1010 R, OFK 700, MFK 700, MFKC 700optimised bearing mount suitable for 12.7 mm ball bearing guide or no ball bearing guideWarranty all-inclusive--> Find out more
Festool Chamfer cutter S8 HW 30° D25-KL OFK
Routing

Festool Chamfer cutter S8 HW 30° D25-KL OFK

Festool
499800
€70.22
Strengths and benefitsThe cutter is supplied with a sturdy steel ball bearingMain areas of useChamfer cutter 30° for edge trimmingNotefor OF 1010, OF 1010 R, OFK 700, MFK 700, MFKC 700optimised bearing mount suitable for 12.7 mm ball bearing guide or no ball bearing guideWarranty all-inclusive--> Find out more
Festool Cutter spindle S8 1,5-5 KL16
Routing

Festool Cutter spindle S8 1,5-5 KL16

Festool
499803
€34.18
Strengths and benefitsThe ball bearing ensures an exact routing depthIt also prevents scorch marks on the workpieceMain areas of useCutter spindle suitable for cutting grooves together with (1.5–5 mm) slot cuttersNotefor OF 1010, OF 1010 R, OFK 700, MFK 700, MFKC 700optimised disk cutter mount and minimum distance of 2 mm to the workpiece enable machining...
Festool Cutter spindle S8 1,5-5 KL28
Routing

Festool Cutter spindle S8 1,5-5 KL28

Festool
499804
€54.67
Strengths and benefitsThe ball bearing ensures an exact routing depthIt also prevents scorch marks on the workpieceMain areas of useCutter spindle suitable for cutting grooves together with (1.5–5 mm) slot cuttersNotefor OF 1010, OF 1010 R, OFK 700, MFK 700, MFKC 700optimised disk cutter mount and minimum distance of 2 mm to the workpiece enable machining...
Festool Cutter spindle S8 1,5-5 D14
Routing

Festool Cutter spindle S8 1,5-5 D14

Festool
499805
€26.61
Strengths and benefitsThis cutter spindle is ideally suited to use with a parallel side fence, in order to individually determine the cutting depthMain areas of useCutter spindle suitable for cutting grooves together with (1.5–5 mm) slot cuttersNotefor OF 1010, OF 1010 R, OFK 700, MFK 700, MFKC 700optimised disk cutter mount and minimum distance of 2 mm...
Festool Edge-trimming cutter with reversible blades S8 HW D19 12x12 KL OFK
Routing

Festool Edge-trimming cutter with reversible blades S8 HW D19 12x12 KL OFK

Festool
499806
€154.27
Strengths and benefitsAlways a sharp router due to the reversible blade systemThe cutter is supplied with a sturdy steel ball bearingMain areas of useFlush trim cutter with ball bearing for edge trimmingNotefor OF 1010, OF 1010 R, OFK 700, MFK 700, MFKC 700optimised bearing mount suitable for 19 mm ball bearing guide or no ball bearing guide12 x 12 mm...
Festool Chamfer cutter with reversible blades S8 HW 45° D27 12x12 KL
Routing

Festool Chamfer cutter with reversible blades S8 HW 45° D27 12x12 KL

Festool
499807
€154.27
Strengths and benefitsAlways a sharp router due to the reversible blade systemThe cutter is supplied with a sturdy steel ball bearingMain areas of useReversible blades for 45° chamfer cutter for edge trimming, with ball bearingNotefor OF 1010, OF 1010 R, OFK 700, MFK 700, MFKC 700optimised bearing mount suitable for 12.7 mm ball bearing guide or no ball...
Festool Roundover cutter with reversible blades S8 HW R3 D28 KL12,7 MFK Festool Roundover cutter with reversible blades S8 HW R3 D28 KL12,7 MFK 2
Routing

Festool Roundover cutter with reversible blades S8 HW R3 D28 KL12,7 MFK

Festool
499808
€171.80
Strengths and benefitsAlways a sharp router due to the reversible blade systemThe special blade geometry enables a perfect work resultThe precise ball bearing is exactly coordinated to the cutterReversible carbide blade provides extreme precision, no resharpening requiredExtremely economical due to long useful lifeMain areas of useRounding wooden and...
Festool Roundover cutter with reversible blades S8 HW R2 D28 KL12,7 MFK Festool Roundover cutter with reversible blades S8 HW R2 D28 KL12,7 MFK 2
Routing

Festool Roundover cutter with reversible blades S8 HW R2 D28 KL12,7 MFK

Festool
499809
€171.80
Strengths and benefitsAlways a sharp router due to the reversible blade systemThe special blade geometry enables a perfect work resultThe precise ball bearing is exactly coordinated to the cutterReversible carbide blade provides extreme precision, no resharpening requiredExtremely economical due to long useful lifeMain areas of useRounding wooden and...
Festool Roundover cutter with reversible blades S8 HW R1,5 D28 KL12,7 MFK Festool Roundover cutter with reversible blades S8 HW R1,5 D28 KL12,7 MFK 2
Routing

Festool Roundover cutter with reversible blades S8 HW R1,5 D28 KL12,7 MFK

Festool
499810
€171.80
Strengths and benefitsAlways a sharp router due to the reversible blade systemThe special blade geometry enables a perfect work resultThe precise ball bearing is exactly coordinated to the cutterReversible carbide blade provides extreme precision, no resharpening requiredExtremely economical due to long useful lifeMain areas of useRounding wooden and...
Festool Roundover cutter with reversible blades S8 HW R1 D28 KL12,7 MFK Festool Roundover cutter with reversible blades S8 HW R1 D28 KL12,7 MFK 2
Routing

Festool Roundover cutter with reversible blades S8 HW R1 D28 KL12,7 MFK

Festool
499811
€171.80
Strengths and benefitsAlways a sharp router due to the reversible blade systemThe special blade geometry enables a perfect work resultThe precise ball bearing is exactly coordinated to the cutterReversible carbide blade provides extreme precision, no resharpening requiredExtremely economical due to long useful lifeMain areas of useRounding wooden and...
Festool Plane cutter S8 HW MFK Festool Plane cutter S8 HW MFK 2
Routing

Festool Plane cutter S8 HW MFK

Festool
500368
€116.01
Strengths and benefitsWith a diameter of 28 mm, larger surfaces can also be easily processedMain areas of useFor routing edges at 0-45°For routing branch knots and adhesive beadsNotefor OF 900, OF 1000, OF 1010, OF 1010 R, MFK 700, MFKC 700for routing on the surface or in the edge areaWarranty all-inclusive--> Find out more
Festool Replacement cutters HW-WP R3 D28 KL12,7 OFK
Routing

Festool Replacement cutters HW-WP R3 D28 KL12,7 OFK

Festool
500369
€99.41
Strengths and benefitsAlways a sharp router due to the reversible blade systemSimple replacement due to supplied TX keyBlade replacement allows the diameter of the router to remain the sameThanks to the carbide, very long service lives are achievedMain areas of useRounding wooden and plastic edgesFor finishing off solid woodReversible carbide blade...
Festool Replacement cutters HW-WP R2 D28 KL12,7 OFK
Routing

Festool Replacement cutters HW-WP R2 D28 KL12,7 OFK

Festool
500370
€99.41
Strengths and benefitsAlways a sharp router due to the reversible blade systemSimple replacement due to supplied TX keyBlade replacement allows the diameter of the router to remain the sameThanks to the carbide, very long service lives are achievedMain areas of useRounding wooden and plastic edgesFor finishing off solid woodReversible carbide blade...
Festool Replacement cutters HW-WP R1,5 D28 KL12,7 OFK
Routing

Festool Replacement cutters HW-WP R1,5 D28 KL12,7 OFK

Festool
500371
€99.41
Strengths and benefitsAlways a sharp router due to the reversible blade systemSimple replacement due to supplied TX keyBlade replacement allows the diameter of the router to remain the sameThanks to the carbide, very long service lives are achievedMain areas of useRounding wooden and plastic edgesFor finishing off solid woodReversible carbide blade...
Festool Replacement cutters HW-WP R1 D28 KL12,7 OFK
Routing

Festool Replacement cutters HW-WP R1 D28 KL12,7 OFK

Festool
500372
€99.41
Strengths and benefitsAlways a sharp router due to the reversible blade systemSimple replacement due to supplied TX keyBlade replacement allows the diameter of the router to remain the sameThanks to the carbide, very long service lives are achievedMain areas of useRounding wooden and plastic edgesFor finishing off solid woodReversible carbide blade...
Festool Router OF 2200 EB-Plus Festool Router OF 2200 EB-Plus 2
Routing

Festool Router OF 2200 EB-Plus

Festool
576215
€1,299.80
The power pack with enormous torque.Strengths and benefitsTop power development and fully variable speed for hard materials and increased material thicknessesOutstanding ergonomics: guide rods offset by 30 degrees to transfer force efficientlyDual guide column clamp for extra torsional rigidity and greater precisionMaximum safety: safety brake stops the...
Festool Hole drilling set LR 32-SYS Festool Hole drilling set LR 32-SYS 2
Routing

Festool Hole drilling set LR 32-SYS

Festool
576799
€698.47
Holes in series.Strengths and benefitsEverything that you need for a series of holes at hand in one SystainerWith the LR 32 system – comprising the guide rail FS 1400/2-LR 32 or FS 2424/2-LR 32 and the hole drilling system – precise rows of holes spaced 32 mm apart can be drilled with the Festool routerThe LR 32 guide rail is aligned quickly and parallel...
Festool Accessories set ZS-OF 2200 Festool Accessories set ZS-OF 2200 2
Routing

Festool Accessories set ZS-OF 2200

Festool
576832
€624.57
Simply practical. Systems get it done.Strengths and benefitsFlexibly equipped for many applicationsCompact and cleverly packed in the Systainer3With the guide rail adapter, the router can be safely guided on the guide rail so that it's precisely straightThe parallel side fence enables parallel working on an edgeThe AFB-OF 2200 support enlarges the router...
Festool Systainer³ SYS3-OF D8/D12 Festool Systainer³ SYS3-OF D8/D12 2
Routing

Festool Systainer³ SYS3-OF D8/D12

Festool
576835
€70.56
Router bits efficiently stowed.Strengths and benefitsProtects the router bits from damageEnsures a good overview of all router bitsCleanly stowed and easy to transport thanks to the Systainer³Main areas of useCutter with a shank of 8–12 mmNoteWarranty all-inclusive--> Find out more
Festool Cordless edge router OFKC 500 R3 EB-Basic
Routing

Festool Cordless edge router OFKC 500 R3 EB-Basic

Festool
577985
€515.60
Ergonomic, easy, quick. The cordless edge router for hassle-free jobs.Strengths and benefitsMobile: Comfortably route edges without cables.Setting: Easy and accurate to 1/10 mm for adjusting the routing depth.No mess-ups: Perfect matching of all OFK 500 cutters (R1-6, chamfers, flush) for base runner drilling.Hard fibre base runner: Stops your workpiece...
Festool Router OF 1010 REBQ-Plus Festool Router OF 1010 REBQ-Plus 2
Routing

Festool Router OF 1010 REBQ-Plus

Festool
578005
€719.75
Lights on for maximum precision.Strengths and benefitsHandy: Thanks to the compact design and low weight.Unobstructed view: Clearly visible routing area.Well lit: Thanks to the rechargeable LED work light in the base panel.In an instant: Quick and easy cutter changes.Precise: Simple routing depth adjustment, accurate to 1/10 mm.Steady: Torsionally rigid...
Festool Cordless module edge router MFKC 700 EB-Basic
Routing

Festool Cordless module edge router MFKC 700 EB-Basic

Festool
578011
€569.34
Cordless versatility at the edge routers.Strengths and benefitsWider range of uses: Tool-free router table that you can swap out easily.Setting: Easy and accurate to 1/10 mm for adjusting the routing depth.Universal: You can use all standard cutters (up to 32 mm in diameter) with the 8 mm collet.Hard fibre base runner: Stops your workpiece getting...
Festool Cordless module edge router MFKC 700 KA EB-Basic
Routing

Festool Cordless module edge router MFKC 700 KA EB-Basic

Festool
578013
€569.34
The cordless edge router for laminate.Strengths and benefitsSpecialist: Edge router for flush trimming and rounding off those annoying edges.Dream team: Spot-on addition to the Edge bander CONTURO KA 65.Guide aid: The chip deflector helps out when flush trimming from 0° to 45° angled edges.Setting: Easy and accurate to 1/10 mm for adjusting the routing...
Festool Accessories set ZS-OF 1010 M Festool Accessories set ZS-OF 1010 M 2
Routing

Festool Accessories set ZS-OF 1010 M

Festool
578046
€298.24
One Systainer. Countless possibilities.Strengths and benefitsVersatile: Flexibly equipped for many applications.Straight: With the guide rail adapter and the support foot, the router can be safely guided on the guide rail so that it's precisely straight.Circular: Circles up to a diameter of 760 mm can be routed with the trammel unit.Precise: The fine...
Festool Parallel side fence SA-OF 1010/MFK Festool Parallel side fence SA-OF 1010/MFK 2
Routing

Festool Parallel side fence SA-OF 1010/MFK

Festool
578054
€64.68
Guided in parallel for the best result.Strengths and benefitsGuided: The parallel side fence enables parallel working on an edge.Precise: Exact readjusting is possible via fine adjustment.Reliable guidance: Precise routing results thanks to the tool free adjustable guidance jaws.Robust and precise: Thanks to the stable die-cast design.Clean: The...
Festool Light module LM-OF 1010 R Festool Light module LM-OF 1010 R 2
Routing

Festool Light module LM-OF 1010 R

Festool
578055
€40.44
Better view thanks to light.Strengths and benefitsPrecise results: Thanks to the shadow free lighting directly on the workpiece.No interruptions to work: Removable battery unit that can be recharged when it is disconnected from the router.Rechargeable: Using a standard charging cable in the USB-C port.One-time installation: The light ring can remain...
Festool Base runner LAS-OF 1010 R Festool Base runner LAS-OF 1010 R 2
Routing

Festool Base runner LAS-OF 1010 R

Festool
578057
€20.39
Transparent and tilt-resistant.Strengths and benefitsLight-transmissive: The work area is optimally lit in combination with the LED light ringSteady: Perfect working without tipping over thanks to the small centre hole and continuous running surfaceAdjustable hole diameter: The opening can be enlarged to the cutter diameter by plunge-cutting with the...
Festool Support AFB-OF 1010 R Festool Support AFB-OF 1010 R 2
Routing

Festool Support AFB-OF 1010 R

Festool
578058
€29.82
Steady support in the edge area.Strengths and benefitsSafe: High stability when working in the edge area thanks to the extra-wide contact surfaceMain areas of useRouting in the edge areaNotefor OF 900, OF 1000, OF 1010, OF 1010 Rwith retaining screwsthe support extension on one side of the base runner prevents the router from tipping overcannot be used in...
Festool Accessories set ZS-MFK 700
Routing

Festool Accessories set ZS-MFK 700

Festool
578375
€420.58
Perfectly equipped for every edge.Strengths and benefitsAdd-ons: More ways to use the MFK 700 and MFKC 700.Router table: With a 1.5° tilt, it stops the laminate surface from getting damaged when you're flush trimming overhanging edges.Steady as you go: The big router table, which you can quickly switch around, has a 1.5° tilt and makes sure you can guide...
Festool Roundover cutter HW R1-OFK 500 Z1
Routing

Festool Roundover cutter HW R1-OFK 500 Z1

Festool
578376
€58.63
Strengths and benefitsSingle-edged cutter (Z1): Less heat buildup means fewer scorch marks when routing across the grain.Special cutter: For rounding off edges, innit?Cutter radius: Spot on for the ball bearing.To protect the surface: The radius transitions into a 5° run-out on the router blade.Low installation height: The flush ball bearing mount of the...
Festool Roundover cutter HW R2-OFK 500 Z1
Routing

Festool Roundover cutter HW R2-OFK 500 Z1

Festool
578377
€58.63
Strengths and benefitsSingle-edged cutter (Z1): Less heat buildup means fewer scorch marks when routing across the grain.Special cutter: For rounding off edges, innit?Cutter radius: Spot on for the ball bearing.To protect the surface: The radius transitions into a 5° run-out on the router blade.Low installation height: The flush ball bearing mount of the...
Festool Roundover cutter HW R3-OFK 500 Z1
Routing

Festool Roundover cutter HW R3-OFK 500 Z1

Festool
578378
€58.63
Strengths and benefitsSingle-edged cutter (Z1): Less heat buildup means fewer scorch marks when routing across the grain.Special cutter: For rounding off edges, innit?Cutter radius: Spot on for the ball bearing.To protect the surface: The radius transitions into a 5° run-out on the router blade.Low installation height: The flush ball bearing mount of the...
Festool Module edge router MFK 700 KA EQ-Plus Festool Module edge router MFK 700 KA EQ-Plus 2
Routing

Festool Module edge router MFK 700 KA EQ-Plus

Festool
578710
€569.34
The end of the perfect edge.Strengths and benefitsSpecialist: Edge router for flush trimming and rounding off those annoying edges.Dream team: Spot-on addition to the Edge bander CONTURO KA 65.Guidance aid: The chip deflector helps out when you're flush trimming those angled edges from 0° to 45°.Setting: Easy and accurate to 1/10 mm for adjusting the...
Festool Module edge router MFK 700 EQ-Plus Festool Module edge router MFK 700 EQ-Plus 2
Routing

Festool Module edge router MFK 700 EQ-Plus

Festool
578715
€569.34
Versatile when trimming edges.Strengths and benefitsWider range of uses: Tool-free router table that you can swap out easily.Cutter change: Quick and easy thanks to spindle stop.Setting: Easy and accurate to 1/10 mm for adjusting the routing depth.Universal: You can use all standard cutters (up to 32 mm in diameter) with the 8 mm collet.Hard fibre base...
Festool Edge router OFK 500 Q-Plus R3
Routing

Festool Edge router OFK 500 Q-Plus R3

Festool
578716
€515.60
The easy edge pro. Ergonomic, simple, quick.Strengths and benefitsSetting: Easy and accurate to 1/10 mm for adjusting the routing depth.No mess-ups: Perfect matching of all OFK 500 cutters (R1-6, chamfers, flush) for base runner drilling.Hard fibre base runner: Stops your workpiece getting damaged. Great glide and super scratch-resistant!Precision: Great...
Festool Copying ring KR-D 3/8 /OF 1010 Festool Copying ring KR-D 3/8 /OF 1010 2
Routing

Festool Copying ring KR-D 3/8 /OF 1010

Festool
578721
€15.34
Strengths and benefitsIndispensable when working with templatesMain areas of useFor gauging routing templatesNotefor OF 900, OF 1000, OF 1010, OF 1010 R, KFthe copying ring can be precisely centred with centring mandrel 492187Warranty all-inclusive--> Find out more
Festool Copying ring KR-D 1/2 /OF 1010 Festool Copying ring KR-D 1/2 /OF 1010 2
Routing

Festool Copying ring KR-D 1/2 /OF 1010

Festool
578722
€15.34
Strengths and benefitsIndispensable when working with templatesMain areas of useFor gauging routing templatesNotefor OF 900, OF 1000, OF 1010, OF 1010 R, KFthe copying ring can be precisely centred with centring mandrel 492187Warranty all-inclusive--> Find out more
Festool Copying ring KR-D 5/8 /OF 1010 Festool Copying ring KR-D 5/8 /OF 1010 2
Routing

Festool Copying ring KR-D 5/8 /OF 1010

Festool
578723
€15.34
Strengths and benefitsIndispensable when working with templatesMain areas of useFor gauging routing templatesNotefor OF 900, OF 1000, OF 1010, OF 1010 R, KFthe copying ring can be precisely centred with centring mandrel 492187Warranty all-inclusive--> Find out more
Festool Copying ring KR-D 3/4 /OF 1010 Festool Copying ring KR-D 3/4 /OF 1010 2
Routing

Festool Copying ring KR-D 3/4 /OF 1010

Festool
578724
€15.34
Strengths and benefitsIndispensable when working with templatesMain areas of useFor gauging routing templatesNotefor OF 900, OF 1000, OF 1010, OF 1010 R, KFthe copying ring can be precisely centred with centring mandrel 492187Warranty all-inclusive--> Find out more
Festool Copying ring KR-D 1 /OF 1010 Festool Copying ring KR-D 1 /OF 1010 2
Routing

Festool Copying ring KR-D 1 /OF 1010

Festool
578725
€15.34
Strengths and benefitsIndispensable when working with templatesMain areas of useFor gauging routing templatesNotefor OF 900, OF 1000, OF 1010, OF 1010 R, KFthe copying ring can be precisely centred with centring mandrel 492187Warranty all-inclusive--> Find out more
Festool Worktop template APS 900/3
Routing

Festool Worktop template APS 900/3

Festool
578727
€542.55
Precise joining.Strengths and benefitsRobust routing template made from aluminiumFor corner and panel joints with a fixed stop of 600, 635, and 650 mm, or adjustable up to 900 mm panel depth.Additionally with two routing templates that can be freely positioned for making recesses for conventional fittings on the underside of panelsPanel depths greater...
Festool Hole drilling set LR 32 Set Festool Hole drilling set LR 32 Set 2
Routing

Festool Hole drilling set LR 32 Set

Festool
583290
€356.55
Holes in series.Strengths and benefitsWith the LR 32 system – comprising the guide rail FS 1400/2-LR 32 or FS 2424/2-LR 32 and the hole drilling system – precise rows of holes spaced 32 mm apart can be drilled with the Festool routerThe LR 32 guide rail is aligned quickly and parallel to the two side stops, which are positioned by means of an adjustable...
Festool Ball bearing guide D19 (2x)
Routing

Festool Ball bearing guide D19 (2x)

Festool
491396
€28.63
Strengths and benefitsPrecision ball bearingMade of high-quality steelMain areas of useSpare ball bearing for cuttersNotefor HW S8 R6.4 KL round nose cutter, HW S8 D19/NL25 edge trimming cutterItems includedBall bearing guideWarranty all-inclusive--> Find out more
Festool Copying ring KR-D 24,0/OF 1400 Festool Copying ring KR-D 24,0/OF 1400 2
Routing

Festool Copying ring KR-D 24,0/OF 1400

Festool
492183
€25.34
Strengths and benefitsThe copying ring can be used without toolsIt is self-centring thanks to the conical holder on the OF 1400Main areas of useFor gauging routing templates, inserted in router without using toolsNotefor OF 1400suitable for cutters up to 19 mm in diameterWarranty all-inclusive--> Find out more
Festool Copying ring KR-D 17,0/OF 1400 Festool Copying ring KR-D 17,0/OF 1400 2
Routing

Festool Copying ring KR-D 17,0/OF 1400

Festool
493315
€24.39
Strengths and benefits The copying ring can be used without tools It is self-centring thanks to the conical holder on the OF 1400 Main areas of use For gauging routing templates, inserted in router without using tools Note for OF 1400 suitable for cutters up to 12 mm in diameter Warranty all-inclusive--> Find out more
Festool Collet SZ-D 6/OF 1010
Non disponibile
Routing

Festool Collet SZ-D 6/OF 1010

Festool
488760
€61.51
Notefor MFK/OFK 700, MFKC 700, OF 900, OF 1000, OF 1010, OF 1010 R, KFwith locking nutfor cutter shank Ø 6 mmWarranty all-inclusive--> Find out more
View options
Festool Dovetail cutter HS S8 D20/17/15°
Non disponibile
Routing

Festool Dovetail cutter HS S8 D20/17/15°

Festool
490995
€44.33
Strengths and benefitsWith the matched system consisting of a router, template and cutter, traditional exposed and blind dovetail joints can be made in no time at allMain areas of useFor creating an open SZ 20 dovetail jointNoteWarranty all-inclusive--> Find out more
View options
Festool Disk groove cutter HW D40x3,5 Festool Disk groove cutter HW D40x3,5 2
Non disponibile
Routing

Festool Disk groove cutter HW D40x3,5

Festool
491058
€30.67
Strengths and benefitsThe carbide-tipped disc groove cutter is perfectly suited to creating grooves for seals or for parquet touch-upCutter replacement is done quickly and easily via a screw on the cutter spindleMain areas of useMake grooves on the front using cutter discs with a cutter width of 1.5 mm to 5 mmThe milling discs can be combined with the...
View options
Festool Centring mandrel ZD-OF/D 6,35+8 Festool Centring mandrel ZD-OF/D 6,35+8 2
Non disponibile
Routing

Festool Centring mandrel ZD-OF/D 6,35+8

Festool
492187
€31.22
Strengths and benefitsThe centring mandrel is suitable for all copying ring sizesThanks to the twisted shank, it fits a shank size of both 6.35 mm and 8 mmMain areas of useCentring of the copying ring at the routerNotefor all Festool routersfor shank support Ø 6.35 mm and 8 mm for centering the copying ringsWarranty all-inclusive--> Find out more
View options
Festool Collet SZ-D 6,0/OF 1400/2000/2200
Non disponibile
Routing

Festool Collet SZ-D 6,0/OF 1400/2000/2200

Festool
494459
€72.60
Strengths and benefitsNo dust penetrates thanks to the closed housing of the union nutThe precise collet holds the cutter securely in the desired positionMain areas of useDustproof clamping collets for routers OF 1400 and OF 2200Open-ended spanner width 24 mmNotefor the OF 1400, OF 2000, OF 2200for cutter shank Ø 6 mmdustproof clamping colletsopen-ended...
View options
Festool Router OF 2200 EB-Set Festool Router OF 2200 EB-Set 2
Non disponibile
Routing

Festool Router OF 2200 EB-Set

Festool
576220
€1,924.37
The power pack with enormous torque.Strengths and benefitsTop power development and fully variable speed for hard materials and increased material thicknessesOutstanding ergonomics: guide rods offset by 30 degrees to transfer force efficientlyTool-free copying ring and base-runner changeFast, convenient router-bit change with rocker and ratchet...
View options
Festool Router OF 1010 REBQ-Set Festool Router OF 1010 REBQ-Set 2
Non disponibile
Routing

Festool Router OF 1010 REBQ-Set

Festool
578049
€1,017.99
Lights on for maximum precision.Strengths and benefitsHandy: Thanks to the compact design and low weight.Unobstructed view: Clearly visible routing area.Well lit: Thanks to the rechargeable LED work light in the base panel.In an instant: Quick and easy cutter changes.Precise: Simple routing depth adjustment, accurate to 1/10 mm.Steady: Torsionally rigid...
View options
Festool Router OF 1010 REBQ-FS-Set Festool Router OF 1010 REBQ-FS-Set 2
Non disponibile
Routing

Festool Router OF 1010 REBQ-FS-Set

Festool
578051
€1,115.14
Lights on for maximum precision.Strengths and benefitsHandy: Thanks to the compact design and low weight.Unobstructed view: Clearly visible routing area.Well lit: Thanks to the rechargeable LED work light in the base panel.In an instant: Quick and easy cutter changes.Precise: Simple routing depth adjustment, accurate to 1/10 mm.Steady: Torsionally rigid...
View options
Festool Router OF 1010 REBQ-FS-Set+Box Festool Router OF 1010 REBQ-FS-Set+Box 2
Non disponibile
Routing

Festool Router OF 1010 REBQ-FS-Set+Box

Festool
578053
€1,434.34
Lights on for maximum precision.Strengths and benefitsHandy: Thanks to the compact design and low weight.Unobstructed view: Clearly visible routing area.Well lit: Thanks to the rechargeable LED work light in the base panel.In an instant: Quick and easy cutter changes.Precise: Simple routing depth adjustment, accurate to 1/10 mm.Steady: Torsionally rigid...
View options
Showing 1-307 of 307 item(s)

Filters

Filter By

Price

Price

  • €15.00 - €1,925.00

Product added to wishlist