Cutters

Adjustable roundover & bevel router bits Adjustable roundover & bevel router bits 2
Industrial router bits

Adjustable roundover & bevel router bits

CMT Orange Tools
CMT8/900.623
€106.63
These new CMT bits are ideal for making new awesome creations! Create a double 4,76mm (3/16”) roundover profile, a double 45° bevel or even a mixed profile on your wood panels easily and in a cost-effective way! Interchangeable shims are included to allow for different stock thicknesses according to the board.   To be used on table-mounted...
View options
Flush trim router bits Flush trim router bits 2
Industrial router bits

Flush trim router bits

CMT Orange Tools
CMT8/906.690-691B
€60.16
These new innovative two-flute router bits are equipped with a double bearing and feature a down shear design, which allows for clean smooth cuts on many materials. Therefore it is no longer necessary to flip or move your tool if you need to ride it from either direction to the other side of your workpiece. You will benefit from this tool especially when...
View options
Adjustable double roundover router bits Adjustable double roundover router bits 2
Industrial router bits

Adjustable double roundover router bits

CMT Orange Tools
CMT8/900.622
€97.38
Create awesome furnishing decorations with these new CMT bits! They provide a double 2mm (5/64”) and 3mm (1/8”) roundover profile on your wood panels easily and in a cost-effective way! Interchangeable shims are included to allow for different stock thicknesses according to the board. To be used on table-mounted routers. Avoid using these bits in...
View options
4-Wing Cut Out Slot Cutters for Solid Surfaces 4-Wing Cut Out Slot Cutters for Solid Surfaces 2
Industrial router bits

4-Wing Cut Out Slot Cutters for Solid Surfaces

CMT Orange Tools
CMT8/922.033.11B
€108.19
This bit features two tungsten carbide-tipped cutting edges for carving out solid surface undermount bowls in composite. For use on hand-held routers. Bit also equipped with a non-marring Delrin®bearing to protect your surfaces.   Ideal for use with all composite materials:
View options
Stepped rebate router bits Stepped rebate router bits 2
Industrial router bits

Stepped rebate router bits

CMT Orange Tools
CMT965.121-122
€37.55
Router bit featuring 2 carbide-tipped cutting edges for producing double rebates on wood and wood composites. Designed for accepting library/bookcase shelving strips or for accommodating hardware into your window slots.  0
View options
Non-blocking combination trimmer bits Non-blocking combination trimmer bits 2
Industrial router bits

Non-blocking combination trimmer bits

CMT Orange Tools
CMT7/809.016
€30.87
CMT’s combination flush and bevel trim bits are perfect for executing superb precision finishing on laminates with ease. Achieve a great variety of angles without even changing the bit. Simply lower the bit cutting depth for precise right angle cuts or raise it to create rounded edges. Suitable for both soft and hardwood. These...
View options
Solid surface sink and trim bits with insert knives and bearing Solid surface sink and trim bits with insert knives and bearing 2
Knife cutters

Solid surface sink and trim bits with insert knives and bearing

CMT Orange Tools
CMT8/980.561-562
€62.11
Trim a sink cut-out flush with the bowl in stages using these "over-hang" and flush trim bits. The Delrin® bearings are tapered to match the slope of the bowl's side. A first pass with the over-hang bit cleans the cut-out edge, leaving a slight over-hang on the underside of the counter. A second pass with the flush-trim bit completes the operation....
View options
Laser Point Bit Laser Point Bit 2
Industrial router bits

Laser Point Bit

CMT Orange Tools
CMT7/8/958
€36.53
This bit crafts delicate grooves and incisions with laser precision. Make one-of-a-kind effects with 30°/35°/60° bevel edges in one single run. Equipped with three super sharp cutting edges, this perfectly balanced bit allows you to work with incredible accuracy with no risk of burning. Raise the bit and produce a delicate fine point incision, or...
View options
Solid surface sink and trim bits with bearing Solid surface sink and trim bits with bearing 2
Industrial router bits

Solid surface sink and trim bits with bearing

CMT Orange Tools
CMT8/980.571-572
€44.62
Trim a sink cut-out flush with the bowl in stages using these "over-hang" and flush trim bits. The Delrin® bearings are tapered to match the slope of the bowl's side. A first pass with the over-hang bit cleans the cut-out edge, leaving a slight over-hang on the underside of the counter. A second pass with the flush-trim bit completes the operation. Made...
View options
Roundover router bits Roundover router bits 2
Industrial router bits

Roundover router bits

CMT Orange Tools
CMT7/8/938
€32.18
The smaller bearing on the CMT Beading bits makes a delicate inset at the base of the cut, giving you the advantage of an extra decorative option. Be sure to keep the black bearing washer right side up to correspond with the bearing rotation when reassembling the bearing. Improper reassembly can cause the bit to unscrew. All CMT roundover bits have a...
View options
Mortising router bits Mortising router bits 2
Industrial router bits

Mortising router bits

CMT Orange Tools
CMT7/8/901
€21.30
Equipped with thick carbide tips and negative shear angle design, CMT mortising bits guarantee flawless performance. Mortise perfect hinges with no splintered edges or rough bottoms. Mortising is a breeze on both natural wood and wood composites. Compatible with most mortising jigs. Complete with a top bearing guide, these bits are the perfect tool...
View options
Flush trim router bits Flush trim router bits 2
Industrial router bits

Flush trim router bits

CMT Orange Tools
CMT7/8/906
€39.49
We have designed a series of truly indispensable bits available in a wide range of sizes for your woodworking needs. For precision work on laminates or quick template work with excellent finishing.   Shop tips: these bits are excellent for making through mortises. Use a straight bit (#711.130.11) to groove the through mortise area,...
View options
DP Flush Trim Bits for Laminates DP Flush Trim Bits for Laminates 2
Industrial router bits

DP Flush Trim Bits for Laminates

CMT Orange Tools
CMT7/8/906.61
€121.56
These new super duty DP (polycrystalline diamond) bits represent the ultimate in the extensive line of CMT flush trim bits. Investing in CMT DP flush trim bits means saving time and money, as they last 40 times longer than conventional carbide-tipped flush trim bits.    Shop tips: after resharpening, replace bearing 791.003.11 (Ø12,7mm)...
View options
3-in-1 flush trim bits for MDF/laminates 3-in-1 flush trim bits for MDF/laminates 2
Industrial router bits

3-in-1 flush trim bits for MDF/laminates

CMT Orange Tools
CMT7/8/907
€30.00
3 in 1 new flush trim bits with Delrin® Triangular bearings are your best partner for laminate trimming. In fact, it solves three of the most common problems that occur when flush trimming:   1) The anti-stick properties of the Delrin® bearing greatly reduces the likelihood of freezing of the bearing from glue. 2) The extended guide surface...
View options
Straight router bits, short series Straight router bits, short series 2
Industrial router bits

Straight router bits, short series

CMT Orange Tools
CMT7/8/911
€22.23
If you are looking to get the most out of your time and money through more efficient production, but want nothing. This double edged cutter is made of special FATIGUE-PROOF® steel and micrograin carbide to withstand even the heaviest of workloads. The surface is protected with our trademark orange non-stick P.T.F.E. coating to help keep the bit...
View options
Pattern router bits, short series Pattern router bits, short series 2
Industrial router bits

Pattern router bits, short series

CMT Orange Tools
CMT7/8/911B
€35.99
Whether you’re a full-time professional woodworker or part-time woodworking enthusiast, the CMT pattern bit is a valuable tool providing unlimited template routing possibilities. Pair up these double-fluted bits with a template of your choice and produce distinctive cabinets, furniture pieces, signs, toys and personalize any other creative...
View options
Straight router bits, long series Straight router bits, long series 2
Industrial router bits

Straight router bits, long series

CMT Orange Tools
CMT7/8/912
€29.85
Beautiful clean edge on your finished piece These razor-sharp, double-faced cutters made of special Fatigue Proof® steel and micrograin carbide can withstand even the heaviest work load and still give you a smooth, precise cut every time. Exceptional chip ejection to allow cleaner and more constant cutting. Surface of all CMT bits is protected with...
View options
Round nose router bits Round nose router bits 2
Industrial router bits

Round nose router bits

CMT Orange Tools
CMT7/8/914
€26.74
Personalize your doors, drawer fronts, panels or any surface you choose with your own signature motif. CMT round nose bits in solid carbide or with carbide tipped flutes let you create engraving in any wood or wood product. We offer a complete selection of diameters and cutting depths so you can achieve the effects you want. Mounted on your router...
View options
V-Grooving router bits (90°) V-Grooving router bits (90°) 2
Industrial router bits

V-Grooving router bits (90°)

CMT Orange Tools
CMT7/8/915
€27.83
These double cutting edge CMT bits offer an almost endless range of woodworking possibilities. Make clean, perfect cuts in panels, drawer fronts or even plasterboard panels; chamfer edges or engrave beautiful lettering.    Tips:  these bits perfectly chamfer at 45° angles (Two tools in one).   Items featuring 31,7mm (1-1/4”)...
View options
Bead & bull nose router bits Bead & bull nose router bits 2
Industrial router bits

Bead & bull nose router bits

CMT Orange Tools
CMT7/8/954
€36.31
CMT’s bull nose bits create elegantly finished edges on stair treads, window sills and shelves in one pass. Add a final touch by using a cutter with a bead diameter wider than the stock thickness.    Safety tips: to be used only on router tables equipped with a fence except in the case. Do not remove the workpiece while the bit is...
View options
Drawer lock router bits Drawer lock router bits 2
Industrial router bits

Drawer lock router bits

CMT Orange Tools
CMT7/8/955.002-502
€42.98
The key to success when constructing quality drawers is in the quality of the drawer lock bit you use. With CMT drawer lock bits you can make strong, perfectly fitting joints quickly and easily. Mill the drawer front with the inside face-down on the work table. Mill the sides of the drawer with the inside face placed vertical to the bit and fence, and...
View options
Ogee Bits Ogee Bits 2
Industrial router bits

Ogee Bits

CMT Orange Tools
CMT7/8/959
€43.99
These profiles are the mirror image of the traditional roman ogee. They add sharp defining details to the edges of cabinets and furniture, before rolling into a smooth convex shape.   Shop tips: this type of machining can be very challenging, for best results, multiple passes are recommended.  0
View options
Decorative Beading Bits Decorative Beading Bits 2
Industrial router bits

Decorative Beading Bits

CMT Orange Tools
CMT7/8/965.0-4-5
€42.98
This new CMT bit produces a classic single or double-edged bead. Ideal for creating a marked decorative effect on panel, door and drawer work.  0
View options
Showing 1-24 of 280 item(s)

Filters

Filter By

Categories

Categories

Price

Price

  • €9.00 - €1,634.00

Cutting height

Maximum stock thickne

Kerf thickness

a

Radius

Material

Diameter

Totale length

Shank diameter

Number of cutting edges

A

Cutting depth

Bore diameter

Pin hole

b

d

DIM

I1

H

LB

PR

R1

Product added to wishlist