List of products by brand Festool

Festool Deburring countersink QLS D 2-8 CE
Drilling and screwdriving

Festool Deburring countersink QLS D 2-8 CE

Festool
492520
€39.17
Work cleanly and steadily.Strengths and benefitsTransverse hole drilling for optimised chip discharge and a burr-free resultEasy positioning thanks to distinct tipSmooth operation and vibration-free workingMain areas of useFor long-chipping materials, non-ferrous metals, plastics, softwood and hardwoodFor pre-counterboring and flush screwingNotefor...
Festool Deburring countersink QLS D 5-15 CE
Drilling and screwdriving

Festool Deburring countersink QLS D 5-15 CE

Festool
492521
€48.40
Easy pre-counterboring.Strengths and benefitsTransverse hole drilling for optimised chip discharge and a burr-free resultEasy positioning thanks to distinct tipSmooth operation and vibration-free workingMain areas of useFor long-chipping materials, non-ferrous metals, plastics, softwood and hardwoodFor pre-counterboring and flush screwingNotefor Festool...
Festool Drill bit with depth stop BTA HW D 5 CE
Drilling and screwdriving

Festool Drill bit with depth stop BTA HW D 5 CE

Festool
492522
€56.18
Long-lasting carbide drill bit for precise work.Strengths and benefitsIdeal for bore holes in coated chipboard5 mm drill bits for subsequent installation of fittings by means of Euro screws or beamsThe drill bit can be replaced if necessary (item no. 491794)Main areas of useMounting fittingsInstallation of drawer guidesInstallation of hinge sockets on...
Festool Drill countersink BSTA HS D 3,5 CE
Drilling and screwdriving

Festool Drill countersink BSTA HS D 3,5 CE

Festool
492523
€73.36
For drilling and countersinking in a single work step.Strengths and benefitsDrilling and countersinking with repeat accuracy in a single pass thanks to adjustable drilling and countersinking depthFreely rotating depth stop prevents damage to the material surfaceIndividually adjustable countersinking depth for different screwheadsThe drill bit can be...
Festool Drill countersink BSTA HS D 4,5 CE
Drilling and screwdriving

Festool Drill countersink BSTA HS D 4,5 CE

Festool
492524
€77.41
For drilling and countersinking in a single work step.Strengths and benefitsDrilling and countersinking with repeat accuracy in a single pass thanks to adjustable drilling and countersinking depthFreely rotating depth stop prevents damage to the material surfaceIndividually adjustable countersinking depth for different screwheadsThe drill bit can be...
Festool Centering bit ZB HS D 5 EURO CE Festool Centering bit ZB HS D 5 EURO CE 2
Drilling and screwdriving

Festool Centering bit ZB HS D 5 EURO CE

Festool
492525
€73.36
Always exactly in the middle.Strengths and benefitsSelf-centred drill holes due to guide sleeveSpring-mounted centring sleeve stored in the housingDrills can be exchangedDepth limitation adjustableLarge chip ejector openingsMain areas of useInstalling fittings such as drawer guides with 5 mm Euro screwsWorking with drill templatesFurniture...
Festool Hook driver HD D 18 CE
Drilling and screwdriving

Festool Hook driver HD D 18 CE

Festool
492526
€15.53
Easily screw and unscrew hooks.Strengths and benefitsFast tool changes thanks to the CENTROTEC interfaceFor application in the SD-CE-DRIVE-UNI screwdriver or in cordless screwdrivers with a CENTROTEC tool chuckMain areas of useFurniture assembly and kitchen fittingAssembly workTurning in wall hooks and screw hooks of all kindsNotefor Festool cordless...
Festool Bit holder BV 150 CE
Drilling and screwdriving

Festool Bit holder BV 150 CE

Festool
492540
€31.42
Secure hold for bits.Strengths and benefitsFast tool changes thanks to the CENTROTEC interfaceSecure hold of bits thanks to powerful magnetThin design enables screw fitting in deep bore holesFor screw fittings in hard-to-reach areasMain areas of useFurniture assembly and kitchen fittingInstallation of fittings, rear walls, stripsInstallation of doors and...
Festool Base runner LA-OF 1400
Routing

Festool Base runner LA-OF 1400

Festool
492574
€40.83
Strengths and benefitsSecure support thanks to simple clip systemHard fibre base runner enables the best sliding propertiesPerfect working without tipping over thanks to small centre holeMain areas of useRouting in the edge area and cornersNotefor OF 1400hard-fibre base runner with 20 mm centre borereduces the opening of the router to the cutter...
Festool Dust extraction attachment AH-OF 1400 Festool Dust extraction attachment AH-OF 1400 2
Routing

Festool Dust extraction attachment AH-OF 1400

Festool
492585
€52.84
Strengths and benefitsSecure mounting via the OF guide rodsExtracts the chips from where they are producedFree view of the work area thanks to transparent plasticThe connecting sleeve is suitable for a suction hose of 27 mm in diameterNotefor OF 1400for sideway extractionfor jointing system VS 500 / VS 600 and for edge trimmingWarranty all-inclusive-->...
Festool Guide rail adapter FS-OF 1400 Festool Guide rail adapter FS-OF 1400 2
Routing

Festool Guide rail adapter FS-OF 1400

Festool
492601
€83.33
Precise guiding.Strengths and benefitsThe distance from the guide rail can be set precisely to a tenth of a millimetre with the fine adjustment wheelPerfect guidance on the guide rail through fine adjustment of the guide playAdditional handle on the adapter to enable safe handlingIs installed using the rods from the items included with the routerThe...
Festool Routing template MFS 400 Festool Routing template MFS 400 2
Routing

Festool Routing template MFS 400

Festool
492610
€391.83
The template with all the options.Strengths and benefitsScale on the profiles accurate to the millimetre for absolute precision when making cut-outs and curvesAligned exactly with the workpiece – via the angle stopsSecured quickly – workpiece secured in prefabricated groove for fastening and lever clampsOption of systematic extension – with table...
Showing 757-768 of 2037 item(s)

Filters

Filter By

Price

Price

  • €0.00 - €5,039.00

Product added to wishlist