List of products by brand Festool

Festool Charger MXC
Battery and charging technology

Festool Charger MXC

Festool
497495
€84.09
Always at the ready. Charged in a flash.Strengths and benefitsSpecially developed for the BP-XS battery packs of the CXS and TXS cordless drills (not for CXS/TXS 12 and CXS/TXS 18)Always up to date: LED display shows the remaining battery life and charge statusFully covered: Of course, the MXC charger is also fully covered by Festool ServiceMain areas of...
Festool Trimming attachment KA-UG-KS 120-R/L
Semi-stationary sawing

Festool Trimming attachment KA-UG-KS 120-R/L

Festool
497514
€630.68
The clever addition for the KAPEX.Strengths and benefitsSafe for transportation and cleverly packedIntegrated meas. scale and adjustable stop permit exact repeat cutsTelescopic slide-out scale for longer workpieces up to 2.40 mWhen working with the KAPEX without an underframe, simply fold back the pedestals and place on the ground – the KAPEX and the...
Festool Denibber LZK-HM
Polishing

Festool Denibber LZK-HM

Festool
497525
€91.24
Main areas of useTargeted removal of dust particles possible due to slight curve on front bladeScrape larger areas using the two flat lateral edgesHollow ground edge on the scraper produces a sharp cutNoteWarranty all-inclusive--> Find out more
Festool SELFCLEAN filter bag SC FIS-CT 48/5 Festool SELFCLEAN filter bag SC FIS-CT 48/5 2
Dust extraction

Festool SELFCLEAN filter bag SC FIS-CT 48/5

Festool
497539
€67.81
Work cleanly and healthily.Strengths and benefitsHigh-quality cloth filter bagCleans off dust deposits independentlyOptimum utilisation of filter bag capacitySuitable for dry extractionMain areas of useFor holding dustAnd for dust-free disposal of extracted productNotefor CT 48optimum utilisation of filter bag capacity and consistently high suction power...
Festool Disposable bag ENS-CT 48 AC/5 Festool Disposable bag ENS-CT 48 AC/5 2
Dust extraction

Festool Disposable bag ENS-CT 48 AC/5

Festool
497540
€58.77
Work cleanly and healthily.Strengths and benefitsDust collection bag for fine dustsWith sealing slide and cable tie for sealingLow-dust disposalMain areas of useFor extracting dust with the CT 48 with Autoclean functionFor the extraction of large volumes of fine mineral dustQuick and easy disposal of large dust volumesNotefor CT/CTL/CTM 48 ACmade of...
Festool Safety filter bag FIS-CTH 26/3 Festool Safety filter bag FIS-CTH 26/3 2
Dust extraction

Festool Safety filter bag FIS-CTH 26/3

Festool
497541
€81.46
Safe work despite hazardous dust.Strengths and benefitsSafe work with hazardous dustWith secure closureMain areas of useFor extracting carcinogenic and pathogenic dustsAsbestos, mould, mineral fibre dustHarmful wood preservativesCadmium, nickel, zinc chromateCorresponds to the requirements of dust class HNotefor CTH 26double-layeredDust category...
Festool Safety filter bag FIS-CTH 48/3 Festool Safety filter bag FIS-CTH 48/3 2
Dust extraction

Festool Safety filter bag FIS-CTH 48/3

Festool
497542
€91.63
Safe work despite hazardous dust.Strengths and benefitsSafe work with hazardous dustWith secure closureMain areas of useFor extracting carcinogenic and pathogenic dustsAsbestos, mould, mineral fibre dustHarmful wood preservativesCadmium, nickel, zinc chromateCorresponds to the requirements of dust class HNotefor CTH 48double-layeredDust category...
Festool Reversible blade Wepla Set D 20 2+2
Routing

Festool Reversible blade Wepla Set D 20 2+2

Festool
497568
€66.44
Strengths and benefitsAlways a sharp router due to the reversible blade systemSimple replacement due to supplied TX keyNotefor HW S12 D20/50 WP reversible blade groove cutterspare reversible blade set for cutter 497455Items includedtwo reversible blades 50 x 12, two reversible blades 9 x 12, TX screws and TX spannersWarranty all-inclusive--> Find out more
Festool Reversible blade Wepla Set D 24 2+2
Routing

Festool Reversible blade Wepla Set D 24 2+2

Festool
497569
€61.65
Strengths and benefitsAlways a sharp router due to the reversible blade systemSimple replacement due to supplied TX keyNotefor HW S12 D24/50 WP reversible blade groove cutterspare reversible blades set for cutter 497456Items includedtwo reversible blades 50 x 12, two 12 x 12 reversible blades, TX screws and TX spannersWarranty all-inclusive--> Find out...
Festool DOMINO router D 8-NL 50 HW-DF 700 Festool DOMINO router D 8-NL 50 HW-DF 700 2
DOMINO joining system

Festool DOMINO router D 8-NL 50 HW-DF 700

Festool
497868
€60.79
Spot-on routing.Strengths and benefitsPerfect true-running, fast router replacement without adjustments, by fixing the router with threaded supportLong service life thanks to the use of carbide bladesMain areas of useFor creating 8 mm dowel cross-cuts. Maximum routing depth: 50 mmNotefor DF 700routing tool with threaded support for the DOMINO XL DF 700...
Festool DOMINO router D 10-NL 70 HW-DF 700 Festool DOMINO router D 10-NL 70 HW-DF 700 2
DOMINO joining system

Festool DOMINO router D 10-NL 70 HW-DF 700

Festool
497869
€65.05
Spot-on routing.Strengths and benefitsPerfect true-running, fast router replacement without adjustments, by fixing the router with threaded supportLong service life thanks to the use of carbide bladesMain areas of useFor creating 10 mm dowel cross-cuts. Maximum routing depth: 70 mmNotefor DF 700routing tool with threaded support for the DOMINO XL DF 700...
Festool DOMINO router D 12-NL 70 HW-DF 700 Festool DOMINO router D 12-NL 70 HW-DF 700 2
DOMINO joining system

Festool DOMINO router D 12-NL 70 HW-DF 700

Festool
497870
€67.81
Spot-on routing.Strengths and benefitsPerfect true-running, fast router replacement without adjustments, by fixing the router with threaded supportLong service life thanks to the use of carbide bladesMain areas of useFor creating 12 mm dowel cross-cuts. Maximum routing depth: 70 mmNotefor DF 700routing tool with threaded support for the DOMINO XL DF 700...
Festool DOMINO router D 14-NL 70 HW-DF 700 Festool DOMINO router D 14-NL 70 HW-DF 700 2
DOMINO joining system

Festool DOMINO router D 14-NL 70 HW-DF 700

Festool
497871
€72.43
Spot-on routing.Strengths and benefitsPerfect true-running, fast router replacement without adjustments, by fixing the router with threaded supportLong service life thanks to the use of carbide bladesMain areas of useFor creating 14 mm dowel cross-cuts. Maximum routing depth: 70 mmNotefor DF 700routing tool with threaded support for the DOMINO XL DF 700...
Festool Sealing slide PLANEX VS-CT AC Festool Sealing slide PLANEX VS-CT AC 2
Dust extraction

Festool Sealing slide PLANEX VS-CT AC

Festool
497926
€63.17
Work cleanly and healthily.Strengths and benefitsEasy operation by pushing open and shutBest possible main filter cleaningCan always remain on the extractorClosure also suitable for dust-free transportMain areas of useFor powerful cleaning of the main filterDust seal during transportNotefor CT AC / CT 36 AC PLANEXensures extreme vacuum in containerthe...
Festool Angle attachment XS-AS Festool Angle attachment XS-AS 2
Drilling and screwdriving

Festool Angle attachment XS-AS

Festool
497951
€100.69
Screwdrive easily around corners.Strengths and benefitsMaximum flexibility due to different installation positionsFastFix support with 1/4" bit holder for a short construction length (construction length with inserted bit = approx. 68 mm)Maximum flexibility due to compatibility with FastFix accessories such as WH-CE CENTROTEC, BF-FX 10 keyless chuck,...
Festool DOMINO, beech D 8x80/190 BU Festool DOMINO, beech D 8x80/190 BU 2
DOMINO joining system

Festool DOMINO, beech D 8x80/190 BU

Festool
498212
€54.67
Steady. Steadier. DOMINO.Strengths and benefitsThe cross cut of a DOMINO dowel corresponds to that of three round dowels of the same drill diameter, meaning that it is extremely steady in comparisonThe laterally projecting guide ribs centre the dowel in the middle of the DOMINO milling groove and thus ensure perfect alignment of workpiecesSpecially formed...
Festool DOMINO, beech D 8x100/150 BU Festool DOMINO, beech D 8x100/150 BU 2
DOMINO joining system

Festool DOMINO, beech D 8x100/150 BU

Festool
498213
€54.67
Steady. Steadier. DOMINO.Strengths and benefitsThe cross cut of a DOMINO dowel corresponds to that of three round dowels of the same drill diameter, meaning that it is extremely steady in comparisonThe laterally projecting guide ribs centre the dowel in the middle of the DOMINO milling groove and thus ensure perfect alignment of workpiecesSpecially formed...
Festool DOMINO, beech D 10x80/150 BU Festool DOMINO, beech D 10x80/150 BU 2
DOMINO joining system

Festool DOMINO, beech D 10x80/150 BU

Festool
498214
€54.67
Steady. Steadier. DOMINO.Strengths and benefitsThe cross cut of a DOMINO dowel corresponds to that of three round dowels of the same drill diameter, meaning that it is extremely steady in comparisonThe laterally projecting guide ribs centre the dowel in the middle of the DOMINO milling groove and thus ensure perfect alignment of workpiecesSpecially formed...
Festool DOMINO, beech D 12x100/100 BU Festool DOMINO, beech D 12x100/100 BU 2
DOMINO joining system

Festool DOMINO, beech D 12x100/100 BU

Festool
498216
€54.67
Steady. Steadier. DOMINO.Strengths and benefitsExcessive glue can escape through the lateral longitudinal grooves100% rotation-proof right from the first DOMINOChamfered end faces make joining the workpieces easierQuick finding of the right dowel through imprinted size specificationsThe cross cut of a DOMINO dowel corresponds to that of three round dowels...
Festool DOMINO, beech D 12x140/90 BU Festool DOMINO, beech D 12x140/90 BU 2
DOMINO joining system

Festool DOMINO, beech D 12x140/90 BU

Festool
498217
€54.67
Steady. Steadier. DOMINO.Strengths and benefitsThe cross cut of a DOMINO dowel corresponds to that of three round dowels of the same drill diameter, meaning that it is extremely steady in comparisonThe laterally projecting guide ribs centre the dowel in the middle of the DOMINO milling groove and thus ensure perfect alignment of workpiecesSpecially formed...
Festool DOMINO, beech D 14x100/80 BU Festool DOMINO, beech D 14x100/80 BU 2
DOMINO joining system

Festool DOMINO, beech D 14x100/80 BU

Festool
498218
€54.67
Steady. Steadier. DOMINO.Strengths and benefitsThe cross cut of a DOMINO dowel corresponds to that of three round dowels of the same drill diameter, meaning that it is extremely steady in comparisonThe laterally projecting guide ribs centre the dowel in the middle of the DOMINO milling groove and thus ensure perfect alignment of workpiecesSpecially formed...
Festool DOMINO, beech D 14x140/70 BU Festool DOMINO, beech D 14x140/70 BU 2
DOMINO joining system

Festool DOMINO, beech D 14x140/70 BU

Festool
498219
€54.67
Steady. Steadier. DOMINO.Strengths and benefitsThe cross cut of a DOMINO dowel corresponds to that of three round dowels of the same drill diameter, meaning that it is extremely steady in comparisonThe laterally projecting guide ribs centre the dowel in the middle of the DOMINO milling groove and thus ensure perfect alignment of workpiecesSpecially formed...
Festool Abrasives Platin D90 S500 PL/15 Festool Abrasives Platin D90 S500 PL/15 2
Abrasives

Festool Abrasives Platin D90 S500 PL/15

Festool
498322
€32.09
The final polish.Strengths and benefitsAdaptable thanks to soft designVersatile in useWith StickFixMain areas of useSpecial abrasives for finishing polymer materials, high-gloss paints and plasticsFinishingExtra-fine sanding workPainter and varnisherJoinersAutomotiveNotefor RO 90 DXfor extra-fine sandingWarranty all-inclusive--> Find out more
Festool Abrasives Platin D90 S1000 PL/15 Festool Abrasives Platin D90 S1000 PL/15 2
Abrasives

Festool Abrasives Platin D90 S1000 PL/15

Festool
498323
€32.09
The final polish.Strengths and benefitsAdaptable thanks to soft designVersatile in useWith StickFixMain areas of useSpecial abrasives for finishing polymer materials, high-gloss paints and plasticsFinishingExtra-fine sanding workPainter and varnisherJoinersAutomotiveNotefor RO 90 DXfor extra-fine sandingWarranty all-inclusive--> Find out more
Festool Abrasives Platin D90 S2000 PL/15 Festool Abrasives Platin D90 S2000 PL/15 2
Abrasives

Festool Abrasives Platin D90 S2000 PL/15

Festool
498324
€32.09
The final polish.Strengths and benefitsAdaptable thanks to soft designVersatile in useWith StickFixMain areas of useSpecial abrasives for finishing polymer materials, high-gloss paints and plasticsFinishingExtra-fine sanding workPainter and varnisherJoinersAutomotiveNotefor RO 90 DXfor extra-fine sandingWarranty all-inclusive--> Find out more
Festool Abrasives Platin D90 S4000 PL/15 Festool Abrasives Platin D90 S4000 PL/15 2
Abrasives

Festool Abrasives Platin D90 S4000 PL/15

Festool
498325
€32.09
The final polish.Strengths and benefitsAdaptable thanks to soft designVersatile in useWith StickFixMain areas of useSpecial abrasives for finishing polymer materials, high-gloss paints and plasticsFinishingExtra-fine sanding workPainter and varnisherJoinersAutomotiveNotefor RO 90 DXfor extra-fine sandingWarranty all-inclusive--> Find out more
Festool Abrasives Granat D90 P500 GR/100 Festool Abrasives Granat D90 P500 GR/100 2
Abrasives

Festool Abrasives Granat D90 P500 GR/100

Festool
498326
€40.22
The universal abrasive with special advantages.Strengths and benefitsUniversal abrasiveSpecially for VOC varnishes and hard substratesWith StickFixMain areas of useProcessing plastics, mineral materials, acrylic, repair compounds, fillersPainter and varnisherDrywallingJoinersProcessing modern paint systemsRecommended for VOC clear coatsProcessing hard...
Festool Abrasives Granat D90 P800 GR/50 Festool Abrasives Granat D90 P800 GR/50 2
Abrasives

Festool Abrasives Granat D90 P800 GR/50

Festool
498327
€38.55
Perfect final sanding.Strengths and benefitsFor perfect final sandingMain areas of useFinal sanding of clear coats and mineral materialsProcessing modern paint systemsWet and dry sandingSheet abrasivesPainter and varnisherAutomotiveNotefor RO 90 DXfine abrasive on material carrier, perforatedWarranty all-inclusive--> Find out more
Festool Abrasives Granat D90 P1000 GR/50 Festool Abrasives Granat D90 P1000 GR/50 2
Abrasives

Festool Abrasives Granat D90 P1000 GR/50

Festool
498328
€38.55
Perfect final sanding.Strengths and benefitsFor perfect final sandingMain areas of useFinal sanding of clear coats and mineral materialsProcessing modern paint systemsWet and dry sandingSheet abrasivesPainter and varnisherAutomotiveNotefor RO 90 DXfine abrasive on material carrier, perforatedWarranty all-inclusive--> Find out more
Festool Abrasives Granat D90 P1200 GR/50 Festool Abrasives Granat D90 P1200 GR/50 2
Abrasives

Festool Abrasives Granat D90 P1200 GR/50

Festool
498329
€38.55
Perfect final sanding.Strengths and benefitsFor perfect final sandingMain areas of useFinal sanding of clear coats and mineral materialsProcessing modern paint systemsWet and dry sandingSheet abrasivesPainter and varnisherAutomotiveNotefor RO 90 DXfine abrasive on material carrier, perforatedWarranty all-inclusive--> Find out more
Festool Abrasives Granat D90 P1500 GR/50 Festool Abrasives Granat D90 P1500 GR/50 2
Abrasives

Festool Abrasives Granat D90 P1500 GR/50

Festool
498330
€38.55
Perfect final sanding.Strengths and benefitsFor perfect final sandingMain areas of useFinal sanding of clear coats and mineral materialsProcessing modern paint systemsWet and dry sandingSheet abrasivesPainter and varnisherAutomotiveNotefor RO 90 DXfine abrasive on material carrier, perforatedWarranty all-inclusive--> Find out more
Festool Holder for spray gun WCR 1000 LPH Festool Holder for spray gun WCR 1000 LPH 2
Workplace organisation

Festool Holder for spray gun WCR 1000 LPH

Festool
498361
€36.39
Everything perfectly tidied away.Strengths and benefitsThe rubber coating protects the cup gun and ensures a better holdSturdy version made of metalMain areas of useStorage of a flow cup gun on the WorkcenterNotefor WCR 1000, UCR 1000holder for paint gunfor assembly at the profile groove for the WCR 1000 WorkcenterItems included2x screw, 2x square...
Showing 1045-1080 of 2037 item(s)

Filters

Filter By

Price

Price

  • €0.00 - €5,039.00

Product added to wishlist