List of products by brand Festool

Festool Mobile saw table and work bench STM 1800

Semi-stationary work

Festool Mobile saw table and work bench STM 1800

Festool

205183

€1,861.55

Set safe and sound.Strengths and benefitsSheet material up to a size of 3100 x 2150 mm can be held and machined by a single personTilting function and height adjustment for ergonomic work that minimises stress on your backWooden coverings securely support the workpiece/sheet material at all times and the sections securely remain on the tableCan be...

Diamond cutting systems

Festool Hand protection HS-AGC 18

Festool

205193

€12.92

Safe work. Protection for the hand.Strengths and benefitsProtection against injuries to handsEasy attaching in just a few stepsAdjustable for individual and precise settingMain areas of useFor safe work with wire brushesNotefor AGC 18for safe work with wire brushesWarranty all-inclusive--> Find out more

Dust extraction

Festool Main filter HF-CTH 26/48

Festool

205198

€105.68

Work cleanly and healthily.Strengths and benefitsFor dusts hazardous to health of dust class H (mould, asbestos)Filtration efficiency 99.995%High-quality flat fluted filter made of polyester materialMain areas of useFor extracting carcinogenic and pathogenic dustsNotefor CTH 26, CTH 48special filter corresponds to the requirements of dust class HWarranty...

Drilling and screwdriving

Festool Angle attachment AN-UNI

Festool

205222

€174.94

Screwdrive easily around corners.Strengths and benefitsExtremely robust processing for maximum loadSimple assemblyFastFix support with 1/4" bit holder for a short construction length (construction length with inserted bit = 85 mm)Maximum flexibility due to compatibility with FastFix accessories such as WH-CE CENTROTEC, KC 13-1/2-MMFP, etc.Main areas of...

Drilling and screwdriving

Festool Eccentric attachment EX-UNI

Festool

205223

€147.99

Drill and screwdrive close to the edge.Strengths and benefitsEasy installation on the cordless screwdriver thanks to the FastFix interface and bayonet lockBit locking system with ball clamp for firmly gripping the bit or CENTROTEC accessoryRotatable stored bit locking system for optimal handlingMain areas of useFor drilling and screwdriving close to...

Semi-stationary work

Festool Angle stop FS-WA/90°

Festool

205229

€160.89

The right angle, every time.Strengths and benefitsCNC-milled aluminium stop made from a single piece for precise and reproducible 90° cutsEasy to attach and completely self-aligningLong contact edge for easy aligning with all workpiece edgesGrooves on the front and rear enable the guide rail clamps to be attachedFor precise sheet cutting when using a...

Dust extraction

Festool Tool holder WHR-CT LHS 2

Festool

205274

€51.36

Put down securely.Strengths and benefitsClean storage: During short breaks from work, simply place the PLANEX on the extractorConvenient to equip: When adding or removing parts, place PLANEX and accessory parts at touch levelMain areas of useFor storing and equipping PLANEX long-reach sanders on the extractorNotefor CT 36 PLANEXwith practical carrier...

Surface preparation

Festool Hook-and-loop fastener KV-215/5

Festool

205294

€9.98

Provides order.Strengths and benefitsCables can be fastened to the suction hosereusable and flexibleMain areas of useIdeally suited to ceiling sanding workPainting/varnishing workDrywallingCarpentryNoteWarranty all-inclusive--> Find out more

Surface preparation

Festool Positioning aid AH-ES-ETS/ETSC

Festool

205316

€162.58

Every edge. Simple sanding.Strengths and benefitsAn edge sander for every edge: Whether sawn or routed, coarse or paintedMachine sanding replaces manual sanding: 50% time savings for improved cost-effectivenessFull-surface support prevents tipping over and sanding throughAdjustable sanding mode: Pull the lever and the flexible angle adjustment will be...

Systainer and transport systems

Festool Systainer³ SYS3 XXS 33 GRY

Festool

205398

€7.77

The pocket-sized Systainer.Strengths and benefitsThe smallest Systainer in the product rangeIdeal for storage of sundries or business cardsMain areas of useFor storing sundriesStowing business cardsNoteWarranty all-inclusive--> Find out more

Systainer and transport systems

Festool Systainer³ SYS3 XXS 33 BL

Festool

205399

€7.77

NoteWarranty all-inclusive--> Find out more

Festool Sanding pad ST D220-LHS 2 225/IP

Surface preparation

Festool Sanding pad ST D220-LHS 2 225/IP

Festool

205415

€68.66

For the perfect surface.Strengths and benefitsScratch-free surfaces thanks to the eccentric movementMain areas of useFor processing plaster and dispersion-based fillersPainterDrywallingRenovatingNotefor PLANEX LHS 2 225 EQ(I) and PLANEX LHS 2-M 225 EQ long-reach sandersnot suitable for PLANEX LHS 225 EQ (until September 2020), not suitable for PLANEX...

Surface preparation

Festool Guide extension VL-LHS 2 225

Festool

205416

€226.48

Strengths and benefitsMaximises the range: Each extension by 450 mmEven particularly high ceilings and walls are easy to reachExtends the PLANEX to a machine length of up to 2.1 m: Extension of up to 900 mm when using two guide extensionsMain areas of useFor sanding particularly high walls and ceilingsUse of 2 extensions for rooms with very high...

Surface preparation

Festool Hose clip SC-LHS 2 225

Festool

205417

€12.58

Everything on hand.Strengths and benefitsSuction hose and cable are optimally guidedMain areas of useCeiling sanding with the PLANEX LHS 2 225 long-reach sanderPainterDrywallingRenovatingNotefor PLANEX LHS 2 225 EQ(I) and PLANEX LHS 2-M 225 EQ long-reach sandersfor securing the suction hose and cable on either the left hand or right hand T-handle end of...

Surface preparation

Festool Interface pad IP D220-LHS 2 225

Festool

205418

€17.58

For perfect sanding results.Strengths and benefitsFor creating perfect and scratch-free surfaces thanks to the eccentric movementIn the event of wear, problem-free replacement without replacing the entire padMain areas of useFor processing plaster and dispersion-based fillersPainterDrywallingRenovatingNotefor PLANEX LHS 2 225 EQ(I) and PLANEX LHS 2-M 225...

Surface preparation

Festool Base runner LAS-H-ES

Festool

205491

€16.46

Slides easily.Strengths and benefitsFor sanding wood or surfaces similar to woodMain areas of useFor particularly good gliding on workpieces with a coarse surface (wood or similar surfaces)Furniture manufactureEdge finishing workPainting/varnishing workNotefor AH-ES-ETS/ETSC, ES-ETSC and ES-ETSplastic all-round crossheaded guide for wood or similar...

Surface preparation

Festool Base runner LAS-W-ES

Festool

205492

€25.34

When everything needs to run smoothly.Strengths and benefitsFor sanding smooth and sensitive surfacesThanks to the burr layer, easy attaching of the velour slideway liningMain areas of useImproves sliding on surfacesFurniture manufactureEdge finishing workPainting/varnishing workNotefor AH-ES-ETS/ETSC, ES-ETSC and ES-ETScrossheaded guide with burr layer...

Surface preparation

Festool Slideway lining GB-LAS-STF-ES/5

Festool

205493

€18.89

Slides easily.Strengths and benefitsFor sanding smooth and sensitive surfacesThanks to the burr layer, easy attaching of the velour slideway liningMain areas of useFor particular good gliding on workpieces with a smooth or delicate surfaceFurniture manufactureEdge finishing workPainting/varnishing workNotefor AH-ES-ETS/ETSC, LAS-W-ES, ES-ETSC and...

Systainer and transport systems

Festool Systainer³ SYS3 HWZ M 337

Festool

205518

€140.74

Systainer³ combines workshop and construction site.Strengths and benefitsThe required tool can be found quickly since all hand tools are clearly displayed for the joiner/carpenterMain areas of useCan be connected to one another and to different generationsCompatible with transport systems and mobile dust extractorsProvides you with order, an overview and...

Cutting with portable circular saws

Festool Saw blade WOOD RIP CUT HW 160x1,8x20 PW12

Festool

205550

€36.72

Quality cuts better.Strengths and benefitsHigh cutting performance for rip cuts in solid woodSaw teeth made of high-quality metal – for optimum saw progress and perfect cutsIt is the ideal solution for precise, efficient work when used together with TS 55 T and TSC 55 K plunge-cut saws, as well as with the HK 55 and HKC 55 – for precise, efficient...

Cutting with portable circular saws

Festool Saw blade WOOD UNIVERSAL HW 160x1,8x20 W28

Festool

205551

€49.90

Quality cuts better.Strengths and benefitsCircular saw blade with cross-cut teeth for fast sawing actionSaw teeth made of high-quality carbide – for optimum sawing action and a good cut qualityWith alternating teeth and a medium chip angle, this saw blade is suitable for both rip cuts and cross cutsColour coding makes it easier to select the correct saw...

Festool Saw blade WOOD FINE CUT HW 160x1,8x20 WD42

Cutting with portable circular saws

Festool Saw blade WOOD FINE CUT HW 160x1,8x20 WD42

Festool

205553

€62.04

Quality cuts better.Strengths and benefitsIn addition to the cross-cut teeth, a "trapezoidal tooth" is used This relieves the cross-cut teeth and ensures a high and even running smoothness as well as a long service lifeExcellent cut quality – clean and splinter-free cutsSaw teeth made of high-quality metal – for optimum saw progress and perfect...

Cutting with portable circular saws

Festool Saw blade LAMINATE/HPL HW 160x1,8x20 TF52

Festool

205554

€93.89

Quality cuts better.Strengths and benefitsTrapezoidal/flat tooth circular saw blade for processing plastic materialsIt is the ideal solution for precise, efficient work when used together with TS 55 T and TSC 55 K plunge-cut saws, as well as with the HK 55 and HKC 55 – for precise, efficient workFine-grain carbide-tipped saw teeth – for optimum sawing...

Cutting with portable circular saws

Festool Saw blade ALUMINIUM/PLASTICS HW 160x1,8x20 F/FA52

Festool

205555

€93.89

Quality cuts better.Strengths and benefitsThe systematic solution for cuts in aluminium and plasticSaw teeth made of high-quality metal – for optimum saw progress and perfect cutsCutting angle and tooth shape are adapted to the application and machineFlat tooth with variable chamfer for consistent quality and a long service lifeIt is the ideal solution...

Festool Diamond circular saw blade ABRASIVE MATERIALS DIA 160x1,8x20 F4

Cutting with portable circular saws

Festool Diamond circular saw blade ABRASIVE MATERIALS DIA 160x1,8x20 F4

Festool

205558

€117.95

Provides a solution for all gypsum-bonded and cement-bonded fibreboard and chipboard.Strengths and benefitsHigh cutting performance when sawing cement-bonded and gypsum-bonded chipboard and fibreboardThe saw blade is fitted with high-quality PCD (polycrystalline diamonds) and has a very long service life with abrasive materialsSpecially developed for TS...

Abrasives

Festool Abrasives Granat D225 P40 GR/25

Festool

205653

€49.93

GRANAT – the perfect choice for sanding. For flawless surfaces.Strengths and benefitsFor plaster and dispersion-based fillersMulti-hole abrasive for perfect extractionMain areas of useProcessing plaster filler and dispersion-based fillerFor machining drywall constructions and ceilingsMulti-hole abrasive for perfect extractionPainter and...