List of products by brand CMT Orange Tools

The raised panel sets with backcutter The raised panel sets with backcutter 2
Cutter set

The raised panel sets with backcutter

CMT Orange Tools
CMT8/900.517-521
€323.69
CMT’s junior raised panel sets add intricate detail on a whole new scale! You will make frame and panel details as small as 70mm (1-3/4") square in material as thin as 11mm (7/16"). Delicate panel doors are only the beginning – use these bits with templates to add interesting arches to your work. The sets include a choice of a cove or an ogee raised panel...
View options
Router Cutters Router Cutters 2
Industrial router bits

Router Cutters

CMT Orange Tools
CMT174HW
€24.80
Technical details: Super strength steel. 2 precision ground HW cutting edges and 1 HW plunge centre tip [Z2+1]. Used for plunging cutting and grooving on solid wood and wood derivatives. For use on CNC machining centres, CNC routers, hand-held routers and point-to-point machines equipped with chucks or adapters.  
View options
Router cutters Router cutters 2
Industrial router bits

Router cutters

CMT Orange Tools
CMT175
€26.82
TECHNICAL FEATURES: - Strength steel. - 2 precision ground HW cutting edges  - 1 HW plunge centre tip [Z2+1].. The cutters with cutting diameter between 4mm and 7mm feature: • Premium quality HWM. • 2 radial relief cutting edges (Z2). • 1 HW (Z1) plunge centre tip.For grooving, jointing and routing on solid wood, wood composites, plastic...
View options
Router cutters Router cutters 2
Industrial router bits

Router cutters

CMT Orange Tools
CMT176HW
€34.67
TECHNICAL FEATURES: • Super strength steel. • 2 precision ground HW cutting edges (Z2). • 1 HW plunge centre tip (Z1).Used for grooving, jointing and general routing operation on solid wood, wood composites, plastics and laminates. Can be used on machining centres, CNC routers and hand-held routers.
View options
ISO30 Chucks for “ER32” Precision Collets ISO30 Chucks for “ER32” Precision Collets 2
CNC chucks and collets

ISO30 Chucks for “ER32” Precision Collets

CMT Orange Tools
CMT183.250/251
€205.88
The ideal accessories for machining centres, point-to-point machines and CNC routers: Extreme precision and reliability. Perfect tool centering. Defect-free rotation. Made from extremely high resistant steel. Precision grinding on all jointed parts. Extreme high rotation performance >= 15 HP – 20.000 RPM. For very efficient sizing on extreme...
View options
Cutter arbor with ISO30 tapered shank Cutter arbor with ISO30 tapered shank 2
CNC chucks and collets

Cutter arbor with ISO30 tapered shank

CMT Orange Tools
CMT183.260
€147.60
The ideal accessories for machining centres, point-to-point machines and CNC routers Extreme precision and reliability. Perfect tool centering. Defect-free rotation. Made from extremely high resistant steel. Precision grinding on all jointed parts. Extreme high rotation performance >= 15 HP – 20.000 RPM. For very efficient sizing on extreme...
View options
HSK chuck for ER32 precision collets HSK chuck for ER32 precision collets 2
CNC chucks and collets

HSK chuck for ER32 precision collets

CMT Orange Tools
CMT183.300
€139.12
The ideal accessories for machining centres, point-to-point machines and CNC routers Extreme precision and reliability. Perfect tool centering. Defect-free rotation. Made from extremely high resistant steel. Precision grinding on all jointed parts. Extreme high rotation performance >= 15 HP – 20.000 RPM. For very efficient sizing on extreme...
View options
HSK-63F Chucks for ER40 Precision Collets HSK-63F Chucks for ER40 Precision Collets 2
CNC chucks and collets

HSK-63F Chucks for ER40 Precision Collets

CMT Orange Tools
CMT183.310
€151.94
The ideal accessories for machining centres, point-to-point machines and CNC routers.   Extreme precision and reliability. Perfect tool centering. Defect-free rotation. Made from extremely high resistant steel. Precision grinding on all jointed parts. Extreme high rotation performance >= 15 HP – 20.000 RPM. For very efficient sizing on...
View options
Cutter arbors with HSK tapered shank Cutter arbors with HSK tapered shank 2
CNC chucks and collets

Cutter arbors with HSK tapered shank

CMT Orange Tools
CMT183.360
€180.23
The 183.360 chuck is ideal accessories for machining centres, point-to-point machines and CNC routers.   Technical features: Extreme precision and reliability. Perfect tool centering. Defect-free rotation. Made from extremely high resistant steel. Precision grinding on all jointed parts. Extreme high rotation performance >= 15 HP –...
View options
Chucks for “ER32” Precision Collets Chucks for “ER32” Precision Collets 2
CNC chucks and collets

Chucks for “ER32” Precision Collets

CMT Orange Tools
CMT183.400
€271.55
The ideal accessories for machining centres, point-to-point machines and CNC routers: Extreme precision and reliability. Perfect tool centering. Defect-free rotation. Made from extremely high resistant steel. Precision grinding on all jointed parts. Extreme high rotation performance >= 15 HP – 20.000 RPM. For very efficient sizing on extreme...
View options
Solid carbide router cutters Solid carbide router cutters 2
Industrial router bits

Solid carbide router cutters

CMT Orange Tools
CMT112HW-HWM
€25.03
TECHNICAL FEATURES: • Premium quality HWM. • 2 radial relief cutting edges (Z2+1). The cutters with 10mm cutting diameter or larger feature: • Super strength steel. • 2 radial relief cutting edges (Z2+1). For grooving, jointing and routing on solid wood, wood composites, plastic materials and laminates.
View options
Router cutters Router cutters 2
Industrial router bits

Router cutters

CMT Orange Tools
CMT113HW
€29.93
TECHNICAL FEATURES: Super strength steel. 2 HW cutting edges . 1 HW plunging tip (Z2+1). For grooving, jointing and routing on solid wood, wood composites, plastic materials and laminates.
View options
Straight cutters with threaded shank Straight cutters with threaded shank 2
Industrial router bits

Straight cutters with threaded shank

CMT Orange Tools
CMT170-171-180-181
€26.35
Technical details:  Super strength steel  2 HW alternating precision ground cutting edges [Z2+1]. Ideal for groovework in solid wood, wood composites and laminates. Can be used on machining centres, CNC routers and hand-held routers equipped with chucks or adapters.  
View options
Solid carbide upcut spiral bits Solid carbide upcut spiral bits 2
HM spiral cutter

Solid carbide upcut spiral bits

CMT Orange Tools
CMT193
€59.84
Sharp technology with a new twist A special super-micrograin carbide formulation was created to produce and hold a keen cutting edge. The new low-angle spiral is designed specifically to shear wood cleanly and provide efficient chip ejection. The tools run cooler and the edges last longer. Increased feed rate and improved cutting quality for enhanced...
View options
Solid carbide spiral bits downcut Solid carbide spiral bits downcut 2
HM spiral cutter

Solid carbide spiral bits downcut

CMT Orange Tools
CMT194
€59.84
Sharp technology with a new twist A special super-micrograin carbide formulation was created to produce and hold a keen cutting edge. The new low-angle spiral is designed specifically to shear wood cleanly and provide efficient chip ejection. The tools run cooler and the edges last longer. Increased feed rate and improved cutting quality for enhanced...
View options
Solid carbide upcut spiral bits for locksets Solid carbide upcut spiral bits for locksets 2
HM spiral cutter

Solid carbide upcut spiral bits for locksets

CMT Orange Tools
CMT195.162
€279.77
Sharp technology with a new twist A special super-micrograin carbide formulation was created to produce and hold a keen cutting edge. The new low-angle spiral is designed specifically to shear wood cleanly and provide efficient chip ejection. The tools run cooler and the edges last longer. Increased feed rate and improved cutting quality for enhanced...
View options
Solid carbide upcut spiral bits with chipbreaker Solid carbide upcut spiral bits with chipbreaker 2
HM spiral cutter

Solid carbide upcut spiral bits with chipbreaker

CMT Orange Tools
CMT197
€160.33
Sharp technology with a new twist A special super-micrograin carbide formulation was created to produce and hold a keen cutting edge. The new low-angle spiral is designed specifically to shear wood cleanly and provide efficient chip ejection. The tools run cooler and the edges last longer. Increased feed rate and improved cutting quality for enhanced...
View options
Solid carbide upcut spiral bits Solid carbide upcut spiral bits 2
HM spiral cutter

Solid carbide upcut spiral bits

CMT Orange Tools
CMT198
€28.30
Sharp technology with a new twist A special super-micrograin carbide formulation was created to produce and hold a keen cutting edge. The new low-angle spiral is designed specifically to shear wood cleanly and provide efficient chip ejection. The tools run cooler and the edges last longer. Increased feed rate and improved cutting quality for enhanced...
View options
796 - “ER20” chucks 796 - “ER20” chucks 2
System and accessories

796 - “ER20” chucks

CMT Orange Tools
CMT796ER20
€56.35
TECHNICAL DETAILS: Super strength steel. Precisely machined for accuracy.   Collet not included.   The TW-200 Torque Wrench is recommended for the proper fastening of clamping nuts.  
View options
Saw blade arbor with parallel shank Saw blade arbor with parallel shank 2
CNC chucks and collets

Saw blade arbor with parallel shank

CMT Orange Tools
CMT183.410
€100.42
The ideal accessories for machining centres, point-to-point machines and CNC routers.   • Extreme precision and reliability. • Perfect tool centering. • Defect-free rotation. • Made from extremely high resistant steel. • Precision grinding on all jointed parts. • Extreme high rotation performance >= 15 HP – 20.000 RPM. • For very...
View options
DP - Router Cutters with Shear Angle - LONG LIFE DP - Router Cutters with Shear Angle - LONG LIFE 2
Polycrystalline diamond cutters

DP - Router Cutters with Shear Angle - LONG LIFE

CMT Orange Tools
CMT142
€167.87
TECHNICAL DETAILS: • Super strength steel. • DP cutting edge. • HW plunging tip for diagonal plunge-cutting (Z-axis tool entrance). • Resharpenable cutter (max 3 times). • Max feed speed 10 m/min.For use on CNC routers for jointing, rabbeting, grooving, on laminates, MDF, HPL, veneer and mela- mine-faced panels..
View options
Solid carbide downcut spiral bits Solid carbide downcut spiral bits 2
HM spiral cutter

Solid carbide downcut spiral bits

CMT Orange Tools
CMT198.660.11
€34.44
Sharp technology with a new twist A special super-micrograin carbide formulation was created to produce and hold a keen cutting edge. The new low-angle spiral is designed specifically to shear wood cleanly and provide efficient chip ejection. The tools run cooler and the edges last longer. Increased feed rate and improved cutting quality for enhanced...
View options
541 - Stop collars with sleeve 541 - Stop collars with sleeve 2
Spare parts and accessories

541 - Stop collars with sleeve

CMT Orange Tools
CMT541.101
€11.90
Stop collars with precision clamping nut for quick and easy assembly. The Delrin® protection sleeve lets you work without leaving marks on the workpiece.  0
View options
992 Kinetic Dust Extractor 992 Kinetic Dust Extractor 2
CNC chucks and collets

992 Kinetic Dust Extractor

CMT Orange Tools
CMT992.101
€450.68
EASY TO USE!   Install & Remove as a clamping nut. Health & Safety. Tool performance and cut quality. Tool life & Labor Costs. Recomended for Nesting and Routing operations. No waisted time during process. Replaces the standard clamping nut. Suitable for any collet chucks with standard router bits. Available for...
View options
541 - Stop collars 541 - Stop collars 2
Spare parts and accessories

541 - Stop collars

CMT Orange Tools
CMT541.100
€4.60
Stop collars with precision clamping nut and key for quick and easy assembly.0
View options
Fine finisging _ DOUBLE SIDED Fine finisging _ DOUBLE SIDED 2
Saw blades

Fine finisging _ DOUBLE SIDED

CMT Orange Tools
CMT287.neg
€103.91
LASER-CUT HIGH QUALITY STEEL PLATE BODY Made with 44 HRC high quality steel and laser-cut to ensure longer life and precision cutting.   LASER-CUT SOUND DAMPENING SLOTS Slots reduce vibrations and noise by 10% compared to blades without it. This feature improves cut quality and extends blade life. In full compliance with National...
View options
Industrial rip & crosscut circular saw blades Industrial rip & crosscut circular saw blades 2
Non disponibile
Saw blades

Industrial rip & crosscut circular saw blades

CMT Orange Tools
CMT285-294-295
€91.71
  LASER-CUT PREMIUM QUALITY STEEL PLATE BODY Made with 46-48 HRC premium quality harmonic steel from Germany and laser-cut to perfection providing tighter tolerances translating to longer life and accurate cutting ability.   LASER-CUT SOUND DAMPENING SLOTS Slots reduce vibrations and noise by 10% compared to blades without it....
View options
Grooving System Grooving System 2
Saw blades

Grooving System

CMT Orange Tools
CMT240.601
€233.14
  LASER-CUT PREMIUM QUALITY STEEL PLATE BODY Made with 46-48 HRC premium quality harmonic steel from Germany and laser-cut to perfection providing tighter tolerances translating to longer life and accurate cutting ability.   LASER-CUT SOUND DAMPENING SLOTS Slots reduce vibrations and noise by 10% compared to blades without it....
View options
Drill bits with 45° countersink set Drill bits with 45° countersink set 2
Boring bits and forstner bits

Drill bits with 45° countersink set

CMT Orange Tools
CMT521A
€56.43
TECHNICAL DETAILS: Super strength steel. Countersink: 2 HW precision ground cutting edges [Z2].   Used for drilling holes in soft, hardwood and wood composites.   Stop collars with precision clamping nut for quick and easy assembly. The Delrin® protection sleeve lets you work without leaving marks on the workpiece.
View options
Showing 901-936 of 1015 item(s)

Filters

Filter By

Categories

Categories

Price

Price

  • €1.00 - €2,539.00

Cutting height

Maximum stock thickne

Kerf thickness

a

Radius

Material

Diameter

Totale length

Shank diameter

Number of cutting edges

A

Cutting depth

Bore diameter

Pin hole

b

d

DIM

I1

V

H

#N/A

PM

KW

B

LB

PR

R1

Product added to wishlist